Layout Control System
Q8: How far does the Switch Machine output rod throw?
A8: Throw of the output rod is adjustable between 1/32" to 1/2" (1mm to 12mm), so it can be used in most popular scales.
Q9: How fast does the Switch Machine output rod throw?
A9: The speed of the output rod throw is adjustable between .5 to 5 seconds.
Q10: Do you have a recommended accessory starting package for using the system?
A10: Because the Walthers Layout Control System is customizable to operate everything from a single turnout to a busy yard, there are
many ways to get started and expand at any time. The heart of the system is the Switch Machine and the accessories that work
together. Using the system’s plug-&-play wiring and a few basic hand tools, modelers can quickly and easily combine products
and complete any installation - here’s the current selection of accessories:
Turnout Drill Set – Handy set includes four drill bits needed to drill through benchwork to clear the Switch Machine actuating
rod, and drill mounting holes for the screws included with the Switch Machine. Drills can also be used when installing any of the
Fascia Controllers too!
Distribution Block – Provides a simple plug and play electrical connection between the Power Supply (sold separately) and from
one to as many as eight Switch Machines – great for passing sidings, interchanges, yards and other trackwork with multiple
turnouts.
2 Amp, 12V Filtered DC Power Supply – Provides necessary filtered power to all Walthers Layout Control System components.
Powers up to 16 Switch Machines using Distribution Blocks (each sold separately). Can also be used to power other layout
accessories.
Extension Cables – For covering long distance between components, each extension cable reaches 48" (1.2m) long with no
cutting, splicing or soldering needed.
Connecting Cables – When you need to cover even longer distances than the Extension Cable allows, add Connecting Cables
between Extension Cables to extend another 48" (1.2m.)
Dual Color LED Fascia Controllers
Crossover Controller – Perfect for crossovers and similar busy locations where crews need to throw two switches. This set
makes it easy to provide positive indication for both turnouts using the large and small controllers, both equipped with yellow/
green LEDs. A drilling template is included for a neat, compact fascia installation, along with complete instructions and a
connecting cable to complete your electrical hook-up.
Turnout Controller – Crews will love this unit’s one-touch operation and positive LED indication if a single switch is thrown for the
through or diverging route. Easy to install facing left or right as needed for single or double track sections, a mounting template is
included for a neat and compact fascia installation. Comes complete with connection cable to speed new or existing installations.
Accessory Controller – Use this smaller controller at yards, interchanges or interlockings for one-touch control with a smaller
footprint. A single yellow/green LED indicator quickly and clearly communicates switch status. Comes complete with connection
cable to speed new or existing installations.
Page 2 of 2
942-101 Series
©2017 Wm. K. Walthers, Inc. All rights reserved
