WallyHome Temperature Controller Manuel utilisateur
Product Manual
Version 1.0
WELCOME TO
Wally allows you to monitor the moisture,
temperature and humidity levels throughout your
entire home. We are excited that you have
decided to protect your home with Wally.
These pieces are all you need to get started. If you wish to purchase additional
Hubs or sensors, visit www.wallyhome.com/buy.
YOUR WALLYHOM SYSTEM INCLUDES:
Hub x 1 Sensor x 6
Ethernet cord x 1 Power cord x 1
1
Compatibility:
Browsers: Internet Explorer 10+ and the most recent versions of Chrome, Firefox,
and Safari.
Mobile Operating Systems: Android 4.0.3 and up iOS 7.0 or later. Compatible with
iPhone, iPad, and iPod touch. This app is optimized for iPhone 5.
To download the most recent version of your browser or mobile application, visit
www.wallyhome.com/support/downloads/
Requirements:
This Requirements Policy is part of the Terms of Use between you and SNUPI (the
“Terms”). Capitalized terms used in this Requirements Policy have the meaning
given in the Terms.
1. Wally is intended for indoor use only.
2. Wally should be used in temperatures ranging from 0°F to 140°F.
Prolonged exposure of Wally to extreme temperatures will degrade its
performance and lifespan.
3. Wally requires a working DSL/cable modem, or LAN-based, always-on,
high-speed Internet connection in your home that is positioned to communicate
reliably with the Wally devices. If your modem is not a modem/router
combination, you should install a router between your modem and your
computer, to share the Internet connection with your Wally Hub. Visit
www.wallyhome.com/support/ for a solution to limited access to Ethernet ports.
4. Wally requires that you establish an account at www.wallyhome.com/mywally
5. Some Wally functionality requires mobile clients, such as a supported
phone or tablet.
6. Wally requires an Ethernet connection to your router or other Internet
connection.
7. Wally must be connected directly to a 120v grounded wall outlet.
2
To Begin:
Open a web browser on your computer and go to
www.wallyhome.com/mywally.
Click on the “Create An Account” button.
Enter in your information and then continue by clicking the
“Create My Account” button.
Email
Password
Can't access your account?
Sign in
Welcome to Wally. Lets get started.
Create a Wally Account
Email
Retype Email
Password
Retype password
Mobile
Property Name
Suit or Apt
City
State Zip
All fields are required
Zip
Full Name
Address
Suit or Apt
City
State Zip
Same as mailing address
I accept the Terms of Use
Property Name
Address
Suit or Apt
City
State
Create My Account
3
Create An Account
Set Up Alert List
Add any additional contacts that you would like alerted should Wally detect a
hazard or conditions that require maintenance. You have the option to designate
contacts as “Primary” or “Emergency.”
SIGNOUT NEED HELP ?
Full Name
Mobile Phone
Set Up Alert List
Primary Contact Primary Emergency
Emergency Contact
Receives all Wally activity
alerts via text and email.
Receives only a text alert in
the case of an emergency.
Cancel Add Continue
Alert list
Contact 1
Type
Contact 2
Type
Contact 3
Type
SIGNOUT NEED HELP ?
Full Name
Email Address
Mobile Phone
Set Up Alert List
Primary Contact Primary Emergency
Emergency Contact
Receives all Wally activity
alerts via text and email.
Receives only a text alert in
the case of an emergency.
Cancel Add Continue
Alert list
Contact 1
Type
Contact 2
Type
Contact 3
Type
Primary contacts may be alerted via email, text, or push
notification for both emergencies and preventative care.
Emergency contacts will only receive text messages if a sensor
detects moisture. 4
Next, you will have the opportunity to “Plan Your Attack.” On this set-up page,
you will be able to designate where each sensor will go within your home. Simply
click on the icon of each area where you’d like to place a sensor and then use the
drop down menus to designate the floor and room for each sensor.
Simply click on a tile to
customize the specific
floor and room of the
chosen location.
Finish by clicking the
“Add to My Locations ”
button. This will add the
tile to the right column
titled “My Locations.”
Once you have added all six locations to "My Locations," click the “Continue”
button to finish planning your attack.
Plan of Attack
5
Now that you have planned your attack, connect your Hub to your router with the
orange Ethernet cord provided. Next, using the white power cord, plug the Hub
directly into an outlet. Important: Avoid using a power strip.
Before the Hub connects to the network, you may see a spinning orange
wheel indicating that connection is still in progress.
Note: It may take a couple
of minutes for the Hub to
connect to the network
and download updates.
Connect Your Hub
6
At this point, you may continue installation on a mobile device. If you
prefer not to move to a mobile device, simply press the button labeled
“Continue” and proceed as directed.
If you prefer to continue
on a mobile device,
please skip to page 11 to
learn how to access your
account on a mobile
device and continue
installing sensors.
Switch to mobile device?
To make placing your Wally sensors easier, you can switch to mobile device or download the Wally app to follow installation
instructions from anywhere in your home.
Using your phone or tablet, login to your account at
https://www.wallyhome.com/mywally/ to continue. OR
Click to continue installing with this device.
Cancel Continue
Need the Wally app?
Download below.
SIGNOUT NEED HELP ?
Once you have established your plan of attack and connected your Hub,
you will need to activate all of your sensors. Each grey tile represents an
inactive sensor on your dashboard.
Activate your Sensors
7
To activate a sensor,
click on the “Activate
This Sensor” link.
Once you click this
button, you will be
directed to the
“Activate a Sensor”
page.
Connected
Activate a sensor
for Dishwasher
To activate a sensor, press and hold the
button until the light turns off and then
realease. The sensor will flash quickly
for a minute.
Cancel
SIGNOUT NEED HELP ?
Once the sensor connects, you will hear a chime indicating that the
sensor has been detected by the Hub.
8
Press the button on the sensor so that the lighted ring
stays illuminated for one second and then continues to
flash in one-second intervals.
The screen will display an orange, spinning wheel while
the sensor connects to the Hub.
Place a Sensor
You will then be directed to a page that displays the recommended location
for the sensor. Once you place the sensor in the desired location, press the
“Continue” button to proceed to the next page.
9
Repeat steps on pages
7-9 for your remaining
sensors.
Table des matières
Autres manuels WallyHome Régulateurs de température
Manuels Régulateurs de température populaires d'autres marques
Swegon
Swegon LUNAd MB Manuel utilisateur
Lucky Reptile
Lucky Reptile Thermo Control II Manuel utilisateur
SENSORMETRIX
SENSORMETRIX Argon 100 Manuel utilisateur
Fuji Electric
Fuji Electric PXE4 Manuel utilisateur
Yuyao gongyi
Yuyao gongyi XMT-808 series Manuel utilisateur
Selec
Selec TC544C Manuel utilisateur
