VVD PAREN Manuel utilisateur
ELECTRIC HEATING DEVICE
FOR BATHS AND SAUNAS
AUTONOMOUS
ELECTRIC BROOM
STEAMER
"PAREN"
Electric power 1.5 kW
MANUAL
Read this manual carefully before installing and operating your electric broom steamer
This operating manual is a document containing design information, specifications and
instructions for correct installation, connection, safe operation, maintenance, transport and
storage of the electric steamer.
Due to the constant improvement of the design of the steamer manufacturing technology,
in this Operation Manual, there may be separate discrepancies between the steamer device
and its description, which do not affect its performance and do not worsen its technical
characteristics.
ATTENTION!
1.
Description and work device ..................................................................................5
1.1
Intended use............................................................................................................................. 5
1.2
Specifications .....................................................................................................................5
1.3
Composition .......................................................................................................................7
1.4
Device and operation of the product........................................................................................ 7
1.5
Instrumentation........................................................................................................................ 9
1.6
Marking and sealing.................................................................................................................. 9
1.7
Packaging….. ............................................................................................................................. 9
2.
USE OF THE PRODUCT ............................................................................. 11
2.1
Preparation for use………………………………………………………………………………………………………11
2.2
Security measures……………………………………………………………………………………………………………….11
2.3
Electrical connection. Preparation for work………………………………………………………………
……….12
2.4
Operation of the product..............................................……………………………………12
2.5
Security measures...............................................................................................12
2.6
Operating procedure ..........................................................................................13
2.7
Action in extreme conditions
.......................................................................... 14
2.8
Possible malfunctions and their elimination……………………………………………………
14
3.
MAINTENANCE ....................................................................................................15
4.
STOREGE AND TRANSPORTATION .........................................................................15
5.
RECYCLING ..........................................................................................................16
6.
WARRANTY OBLIGATIONS ....................................................................................16
7.
WARRANTY CARD.................................................................................................... 18
Steamer for brooms, designed for high-quality steaming and
subsequent storage in a steamed state of standard deciduous and
coniferous bath brooms in an atmosphere of saturated steam.
Professional bathers and even sauna lovers know and understand
very well that a broom steamed in water, especially hot, becomes heavy
and sticky. A lot of useful phytoncides, essential oils and other useful
microelements are soaked from it. A broom steamed in an atmosphere of
gentle saturated steam not only does not lose these elements, but also
becomes soft, light and, as the bathers say, “silk”. Steaming sessions with
such a broom are undoubtedly both useful and pleasant.
1.1
Purpose
1.1.1
The steamer for brooms PAREN", hereinafter - the Product, is intended for high-quality steaming and
subsequent storage in a steamed state of standard deciduous and coniferous bath brooms in an atmosphere of
saturated steam. “PAREN” can be successfully used both as a fragrance device when placing phyto-steam
material in it, and as an air humidifier in a dry microclimate in a steam room.
1.2
Specifications
Name
Unit of.
Norms, parameters
Rated power consumption
kW
0-1.5
Recommended number of brooms to be steamed at the same time
PCS.
1-4
Recommended rated current of the circuit breaker
A
10
Cross-section of power and grounding wires
mm2
1.5
Productivity (by water consumption)
l / hour
0–3
Water tank volume
l
6
Overall dimensions (Width, Depth, Height)
mm
355х332х740
Weight
Kg
16
Supply voltage
B
220
Current type
variable
Working hours
Long lasting
Electric shock protection class
01
Protection degrees
IPХ4
Installation method
Wall and floor
1. DESCRIPTION AND OPERATION OF THE PRODUCT
Figure: 1. Appearance of the steamer
1.3
Composition
№
em
№
Name
Unit
Quantity
1
Steamer for broom ‘’PAREN’’
PCS
1
2
Manual
PCS
1
3
Packing container
PCS
1
1.4
Design and operation of the product
1.4.1
The appearance and design of the product are shown in Fig. 1 and 2.
1.4.2
The product consists of two functional blocks:
• Tank for boiling water (item 1, fig. 2).
• Container for brooms (pos. 2, fig. 2).
1.4.3
Product specification.
1.4.4
In the lower part of the Product there is a stainless steel tank (pos. 1, fig. 2) with a heating element installed in
it (pos. 4, fig. 2). Above the tank there is a container for brooms (item 2, fig. 2) made of stainless steel and lined
with wooden slats (item 6, fig. 2). The water tank and the broom container are separated by a perforated grid.
The broom container is closed with a lid (pos. 7, fig. 2).
1.4.5
On the front side of the Product there is a control panel with an indicator and buttons (pos. 3, fig. 2). The
indicator shows in percentage display from 220 V the value of voltage supplied to the heating element installed
in the water tank of the steam generator and serving to heat the water. The buttons below the indicator allow
adjusting the power level of the water.
Figure: 2. External view of the steamer in section
heating element from 0% to 100%. The water heating control unit (pos. 5, fig. 2) and terminals for
electrical connection are located behind the front decorative panel of the base.
1.4.5 Wiring diagram for connecting the steamer in fig. 3.
1.5. Instrumentation
1.5.1. Steam generation is monitored and controlled using a display panel.
1.6. Marking and sealing
1.6.1. The marking is applied to the nameplate located on the body of the Product.
1.6.2. The marking complies with the requirements of Article 5 of TR CU 004/2011 and contains the
following data:
• conventional designation (type) of the product,
•trademark or name of the manufacturer,
factory number,
• device power in kilowatts,
• rated voltage of the supply network in volts,
• weight of the device in kilograms,
•year of manufacture,
• country of manufacture,
• designation of technical conditions,
• product sealing is not provided
1.7. Packaging
• The product is packed in corrugated cardboard boxes.
• Packaging and preservation of the product comply with the requirements of Section 3 of GOST
23216 for conditions
of transportation, storage and shelf life.
9
10
Figure: 3. Wiring diagram of the steamer connection
Table des matières
Manuels cuiseur vapeur électrique populaires d'autres marques
Morphy Richards
Morphy Richards FS48751MEE Manuel utilisateur
Cuisinart
Cuisinart STM1000AR Manuel utilisateur
Hastings
Hastings DIRECT GAS FIRED ELECTRIC STEAM Guide rapide
Galantine
Galantine SILVER Style SC-5003B Manuel utilisateur
Cleveland
Cleveland SteamChef 22CET3.1 Manuel utilisateur
Cleveland
Cleveland Enodis 24-CDM Manuel utilisateur
