VTA VM4 Manuel utilisateur
Read this user's manual carefully before using your vehicle.
www.VTAmobility.com.tr
vm4
USER MANUAL
2
PREFACE
IMPORTANT NOTE
This product is designed for an environmentally friendly transportation.
Throughout the guide you will see the advantages and characteristics of the
vehicle. Its general specifications are as follows;
• High eciency brushless DC motor
• Electronic control unit (Controller) which protects from high and low voltage.
• Braking system with electric cut-o feature for safe driving.
• High capacity battery providing longer range and high performance
• Front suspension providing a pleasant and comfortable driving pleasure.
• Vehicle parts in conforming to European standards.
Driver and Passenger
• This vehicle is designed to carry a maximum of one driver.
• Please use your vehicle without exceeding the load limits written on the
vehicle’s certificate of conformity.
Road Condition
• This vehicle is designed for use on flat and asphalt roads.
• Do not use the vehicle without reading the entire user manual.
• It is recommended that you read the “Warning, Caution, Note and Safety
Precautions” sections carefully.
• After purchasing your vehicle, you should take it to the nearest authorized
service center or distributor for maintenance.
CAUTION
WARNING
• These headings are written to protect you from serious personal injury or potential accidents.
• It is obligatory to comply with the maintenance intervals written in the user manual. Otherwise,
your vehicle will be out of warranty conditions. The maintenance intervals for your vehicle and
the parts that need to be changed/checked are listed in this user manual.
• These headings are written to protect you from serious personal injury and mechanical dam-
age.
3
32 4
Contents Safe
Driving
Preface
6
General
View
8
Storage
Conditions
Technical
Specifications
Manunfacturer
Information
Actuation
And Usage
Maintenance
And Control
Guarantee
CONTENTS
12
19 20
22
21
4
SAFE DRIVING
Pre-Drive Instructions
• Check the condition of all the movable parts.
• Check all rotating parts and add oil if necessary
• Check whether the tyres are in good condition.
• Check the tyre pressures.
• Make sure that all nuts and bolts are tightened adequately.
• Check that the brake cable and other cables are not pinched and are working
properly.
• Make sure the throttle is working properly.
• Check all lighting systems.
Safe Driving Instructions
• Follow the pre-drive instructions before starting to use.
• Grasp the grips with both hands while driving.
• Make sure you maintain a safe driving position.
• Practice often, primarily to gain experience.
• Obey the maximum loading conditions specified in the manual.
• Objects moving while driving will change the vehicle’s center of gravity and
will endanger the driving safety. Take the necessary measures to avoid this
situation.
• Avoid acrobatic movements while driving your vehicle.
• Avoid high speeds when turning.
• Wet weather lengthens the braking distance and restricts maneuverability. In
such cases, always maintain your low speed.
• Avoid excessive puddles that may occur in rainy weather.
• Do not use under the influence of alcohol and drugs.
• Do not enter curvy road with your vehicle at high speeds. This can cause your vehicle to
rollover and endanger your life.
WARNING
5
SAFE DRIVING
Ecient Driving Instructions
If the following ecient driving instructions are followed, your vehicle’s driving
range and eciency will increase;
• Take your vehicle to service regularly.
• Comply with the maximum load limits in the manual.
• Be careful about using your vehicle in suitable weather and road conditions.
• Check all tyres before riding, that your tyre pressures are appropriate.
• Pay attention to the maximum speed limits.
6
GENERAL VIEW
• All parts listed in the user manual are given as reference. The manufacturer can make changes
without notice.
WARNING
1- Head Lamp
2- Mirror
3- Brake Lever
4- Speedometer
5- Ignıtion
6- Seat
7- Stop Lamp
8-Front Direction Indicator
9- Front Wheel
10- Electric Motor
11- Rear Wheels
12- Compensating Wheel
13- Charging Connector
1
23
4
5
6
7
910
13
11
12
7
1
2
3
4
5
6
7
8
GENERAL VIEW
•All parts listed in the user manual are given as reference. The manufacturer can make changes
without notice.
WARNING
1- Main / Dipped Beam Button
2- Speedometer Panel
3- Throttle lever
4- Horn
5- Direction Indicator Button
6- Direct / Reverse Driving
7- Lighting Switch
8- Electronic Gear
SPEEDOMETER INDICATORS
!
Brake Fault Main Beam Charging
8
ACTUATION AND USAGE
Actuating
Insert the ignition key into its slot and turn it to the on position.
Acceleration and Deceleration
• Turn the throttle lever downwards. In this case, your vehicle will move.
The speed can be increased or decreased with the throttle. Turn the throttle in
direction (a) to increase your speed, or (b) to decrease speed.
Braking
There are braking sensors in the brake lever. In this way, the brakes both
provide mechanical braking as well as cut the energy of the motor.
• Grasp the brake lever with your fingers and gently squeeze it towards you.
• Slowly loosen the brake lever to stop braking.
• Avoid sudden and hard braking. Otherwise, your vehicle may slip and cause
accidents.
• Be careful when braking on downhill descents.
Front and Rear Brake
The brake system of your vehicle is equipped with front and rear drum brake
system. The front and rear brake is activated with the brake lever on the handlebar.
For braking, the brake lever free travel distance should be 5-10 mm. After this
distance, the braking process should start.
CAUTION
• The throttle must be released while squeezing the brake levers.
• You can experience the brake sensitivity. For safer deceleration, front and rear brakes should be
used together.
• If the brakes are used for a long time, the brake kits get hot and their performance decreases.
This, in turn, can increase your braking distance and aect your safe braking.
• Brake pads should always be replaced with original products. Low quality parts can damage
other parts of the vehicle. It also aects the performance of your vehicle.
• The braking system is vital for your safety. Have regular checks and adjustments made at
authorized services at the intervals given in the periodic maintenance chart.
A
B
9
ACTUATION AND USAGE
Battery Information
The vehicle is equipped with five rechargeable VRLA gel batteries that can
provide 60V 22Ah energy. Since, the use of the battery aects the life of the
vehicle and environmental conditions, it is necessary to pay maximum attention
to the following points.
• Keep batteries away from children.
• Avoid contact of your battery with water.
• Do not disassemble the batteries. Do not tamper with the batteries with
sharp tools.
• Protect the batteries from temperatures of 60 degrees and above.
• Do not subject it to physical impacts such as hitting, throwing, dropping.
• Do not pour the liquid inside the battery to the soil, water or sewer.
• Do not burn the plastic parts of the battery in stoves and boilers.
• In case any leakage comes into contact with skin or eyes, rinse immediately
with plenty of water.
WARNING
• Store your electric vehicle away from the cold, in your garage if possible. This will extend the
life of your battery.
• If you do not use your electric vehicle for a month or more, discharge and recharge the batteries
at least once every months. This will help you maintain the battery performance.
Seat Lock
• For raising the seat, insert the key its slot located at the back of the vehicle and turn
on.
• To close, release slowly the seat into its driving position.
• There are live electrical parts such as fuses and converters in the compartment under the
seat. Although these parts have IPXXB protection level, avoid contact with bare hands except
authorized persons.
CAUTION
10
ACTUATION AND USAGE
• Damaged chargers due to voltage dierences in your electrical installation may damage your
vehicle. These types of faults are not covered by the warranty.
• Plugging the charger into the socket first will protect your vehicle from possible high/low
voltage situations.
• Charging at least once a month will extend the life of your battery.
• When the battery is fully charged, disconnect it from the charger.
WARNING
Charger
• Charge your electric vehicle with the charger delivered to you with the vehicle.
Don’t forget to charge it for 6-8 hours before its first drive. To charge the
vehicle, please follow the instructions below;
• Make sure your electric vehicle is turned o.
• First of all, plug the part of the charger indicated with “2” into the socket.
• Then, place the part of the charger indicated with “1” to the charging connector
of your vehicle.
• Arc/spark may occur while connecting the charger to the vehicle.
• Make sure that red light indicating on the charger that the battery is charging
• Wait until the light on the indicator turns green.
• After the charging is complete, unplug the socket from the charging port.
• Disconnect the charger from the socket.
• Disconnecting the charger from the socket will extend the life of the vehicle.
CAUTION
• If the battery charge time exceeds the time specified in the manual, please contact the
authorized services.
• During the winter, the performance of the battery and range of your vehicle may decrease.
1
2
Ce manuel convient aux modèles suivants
1
Manuels Scooter populaires d'autres marques
First Choice Mobility
First Choice Mobility Roma Medical Corella S741 Manuel utilisateur
Carrera
Carrera impel Manuel utilisateur
Afikim
Afikim Superlight SL-3 Manuel utilisateur
CareCo
CareCo ZOOM Manuel utilisateur
Douglas
Douglas Vespa G.S. Manuel utilisateur
Gazelle
Gazelle with BOSCH System Manuel utilisateur