Voscom VOS-2000FT Series Manuel utilisateur

VOS-2000FT/R series

2-Channel Video Fiber Optic Transmission

Installation Manual

Fiber Optic Transmission Systems

VOSCOM TECHNOLOGIES CO.,LIMITED

WWW.VOSCOM.COM

Important Safety Instructions EN_1

1. Readthese instructions. Keep these instructions. Heed allwarnings. Follow all instructions.

5. Donot use this apparatus near water. Cleanonly with dry cloth.

7. Donot block any ventilation openings. Install in accordance with the manufacturers

instructions.

8. Donot install near any heat sources such as radiators, heatregisters, stoves,or other

apparatus (includingamplifiers) that produce heat.

9. Donot defeat the safety purpose of the polarized or grounding-type plug. A polarized plug

has twoblades withone wider than the other. Agrounding type plug has two blades and a third

grounding prong. The wideblade or the third prong are provided for your safety. Ifthe provided

plug doesnot fitinto your outlet consult an electrician for replacement of the obsolete outlet.

10. Protectthe power cord from being walked on or pinched particularly at plugs,convenience

receptacles, andthe points where they exit from the apparatus.

13. Referall servicingto qualifiedservice personnel. Servicing is required when the apparatus

has beendamaged in any way, suchas power-supply cord or plug is damaged, liquid has been

spilled or objects havefallen into the apparatus,the apparatushas been exposed to rain or

moisture, doesnot operatenormally,or has been dropped.

14. Apparatusshall not be exposed to dripping or splashing and that no objects filled with liquids,

such asvases shall be placed on the apparatus.

15. WARNING: To reduce the risk of fire or electric shock, do not expose this apparatusto rain or

moisture.

16. Installation should be done only by qualified personnel and conform to all local codes.

20. CAUTION: These servicing instructions arefor useby qualified service personnel only.To

reduce therisk of electric shock do not perform any servicing other than that contained in the

operating instructionsunless youare qualifiedto do so.

Website:www.voscom.com

Product Overview En_2

Video

The VOS-2000FT/R can transmission2-Channel

video for fixed cameraover singlemodeor multimode

optical cable.

Stand-alone orrack-mount.The cards can be inserted

into our 14 slots,19inch 4U or 6U rack-mountable

card cage (VOS-CH04 or VOS-CH06).

System Diagram:

Model Number

Transmitter Receiver Fiber Mode Wavelengths Optical

Power

Budget

Maximum

Transmission

Distance

Multi-Mode 1310nmVOS-2000FMRVOS-2000FMT

•The OpticalPower Budgetdata fitMulit-mode(62.5/125 m),Single-Mode(9/125 m).

•When using50/125 m multimode fiber, subtract3 dBfrom the optical power budget.

•Optical transmissiondistance is limited to optical loss of thefiber and any additional loss introduced by connectors,

splices andpatch panels.

•Maximum transmissiondistance is also limited by fiber bandwidth.

•Power adapteris manufactured by thirdparty and is supplied with fitted screw-terminal outputcables.Power

adapter included(for standalone) US, European, UK or Australian powerplug.

•Please feelfree to consult factory for anyspecial requirement and customization

Note:

16dB 2km

Single-Mode 1310nmVOS-2000FSRVOS-2000FST 12dB 20km

VOS-2000FST-4

VOS-2000FST-6

VOS-2000FSR-4

VOS-2000FSR-6

Single-Mode

1310nm

1550nm

18dB

25dB

40km

60km

Models and Optical Power Budget:

•Uncompressed Digital Composite Video over onefiber

•Compatible with all PAL,NTSC,SECAM Video Systems

•Multi-mode Fiber Support for Distances up to 2.0 km

•Single-Mode Fiber Support for Distances up to 100 km

•LED Status Provide RapidIndication of Operating Parameters

•No EMI or RFI and noground loops

•Stand alone or rack-mount

Features:

Note: More detailspecification please find inthe datasheetor our website: www.voscom.com

Fixed Camera

1 Fiber opticCable

Monitor

VOS-2000FT

Transmitter VOS-2000FR

Receiver

2 x Video 2 x Video

Coax Coax

Fiber OpticConnector, FC/PC or ST/PC

V1~V2 BNCConnector, 75-ohmanalog video input (Transmitter)/output (Receiver)

Stand-alone Power supply Connector, DC5V2A Input.

Typical Connection:

Panel & Cable Connection En_3

NOTE1:Digital video optic transmitterand receivershould be used in pairs, one is Transmitter

(LED is red), theother is Receiver (LED is green).

NOTE2: Avoid simultaneously connecting video signals to both the front BNC and rear BNC of the

same channel.Also,since each video channel is factory terminated to 75 ohm, unused BNCs

should notbe used for loop-through video connections.

1 2 3 4

DATA

EXT

FRONT PANEL

EXT2

EXT1

DC5V

OPTIC

POWER

REAR PANEL

FTX

C+ C- D+D-A+ A- B + B-

DC5V 2A

Power Supply Power Supply

DC5V 2A

Video Input

Optic Output Optic Input

Optical Transmitter Optical Receiver

Monitor

Camera

Typical DigitalVideo Recorder,

Matrix Switcher, Multiplexer,

or other VideoManagement

Device

Video Coax

None None

None

Stand-alone Installation En_4

The VOS-2000FT transmitter/VOS-2000FR receivercan be mounted into a rack or canbe usedas

a stand-alonemodule. As a stand-alone module, the unit can be placed on a desktop or can be

mounted to a wall.

NOTE: Before mounting the VOS-2000FT transmitter/VOS-2000FR receiver, please ensure that

there is adequate space at both ends forviewing the front-panel LEDsand for making the various

rear-panel cableconnections.

Website:www.voscom.com

Stand-alone Mounting Size: 142mm x 107mm x 25mm

Rack-mount Installation En_5

Installation Instructions

Typical Configurations:

1:Install the video card into a standard 19inch rack, usinguser-supplied rack-mounting

hardware. Becareful to not damage exposed objects on the back of the card cage unit.

2:If asecondary earth ground connectionis needed, a grounded wire with a ground lug can be

attached to the rackusing the protruding screw provided on the right side of the chassis.

3:If desired, blank panels may beinstalled to cover unused slots. A single blank panel coversa

single slot opening.

4:Each fiber optic plug-in module is equipped with a POWER LED indicator that illuminates

when power is applied to the rack unit.

5:Fiber optic plug-in modules(video cards) can be installed into anyof theavailable 14slots

of thecard cage. Most modules require onlya single slot width, but others, such as the 8-Ch

video Series, require two slot widths.

VOS-CH04:

19 inch4U,14 video card slots, suit for 1-ch,2-ch,4-ch,8-ch(two slots)video cards.

Support oneslide-in power supply AC100V~AC240V

VOS-CH06:

19 inch6U,16 video card slots, suit for 1-ch,2-ch,4-ch,8-ch(two slots)video cards.

Support two slide-in power supply AC100V~AC240V, one for redundancy.

Website:www.voscom.com

The VOS-2000FT transmitter/VOS-2000FR receivercan be installed into our rackmount chassis,

VOS-CH04 orVOS-CH06, which can be mounted into an industry-standard 19-inch equipmentrack.

Troubleshooting En_6

Indicator Status Meaning Possible Cause Corrective Action

Power LED

Light Power isbeing applied

to the module. --- No actionrequired.

Not Light Power isnot being

applied to the module.

Check powerconnection.

If moduleis rackmounted,

reseat moduleor power

supply asnecessary.

Power connectionis

faulty.

Power supplyhas failed. Replace powersupply.

Loss ofpower occurs due

to trippedcircuit

breaker(s), blownfuse(s),

or faultyelectrical

service.

Check circuit breaker(s),

fuse(s), orelectrical

service asnecessary.

LED indicators on thefront-panel of the transmitter/receiverallow youto monitor signal status,

laser status,data activity, contact closure activation, and operatingpower. Table A~D provide

information aboutthe front-panelindicators and associated troubleshooting guidelines.

Table A: Power Links

Indicator Status Meaning Possible Cause Corrective Action

Video LED(VIDEO 1,VIDEO 2....)

Light Incoming video signal

is present on thechannel. --- No actionrequired.

Not Light

on Transmitter Incoming video signal

is not present on the

channel.

Check power connection

to the video source.

Video source is not

powered on.

Video source is not

connected to the

transmitter.

Check BNC connections.

Coaxial cable is

defective. Replace cable.

Table B: Video Links

Not Light

on Receiver Incoming video signal

is not present on the

channel.

Optical signal is not

being receivedfrom the

transmitter. Optic Fault

LED is also not light.

Refer tothe Optic Fault

LED section in this table.

Video source is not

powered on. Check power connection

to the video source.

Video source is not

connected to the

transmitter.

Check BNC connections.

Coaxial cable connected

to the transmitter is

defective.

Replace cable.

Website:www.voscom.com

Troubleshooting En_7

Indicator Status Meaning Possible Cause Corrective Action

Data(RS485/RS232/RS422) LED

Flashing

Data is being transmitted

onto the fiber by the data

port or is being received

from thefiber by the

data port.

--- No actionrequired.

Table C: Data Links

Indicator Status Meaning Possible Cause Corrective Action

Optic LED

Light The optical signal is being

received andlaser is

operatingproperly.

--- No actionrequired.

Not Light

Table B: Optic Links

Not Light

Data isnot being

transmitted ontothe

fiber bythe data port or

is notbeing received

from thefiber by the

data port.

Data isnot present on

the channel. No actionrequired.

Data connectionis faulty. Check dataconnections.

Data communication

cable isdefective. Replace cable.

The optical signal is

not beingreceived.

Remote fibermodule is

not poweredon. Check power connections.

Replace powersupply if

necessary.

Fiber optic cable is not

connected. Check fiberoptic

connections.

Fiber optic cable

connectors aredirty or

are damaged.

Clean, polish, or replace

fiber opticcable

connectors asnecessary.

Fiber optic cable is

defective. Replace cable.

A problemexists with

the optical power

budget.

Verify thatlosses infiber

optic cable do not exceed

the optical power budget

specification of the fiber

optic link. If the losses do

exceed theoptical power

budget, contactProduct

Support.

Website:www.voscom.com

Return & Warranty Policy En_8

Warranty Introduction

All VOSCOM manufactured productsare warrantedto be free from defects in manufacturing and

materials forthe warranty term of 3 years. VOSCOM will repair or replace any equipment or parts

proved tobe defectiveduring the term of the warranty.

VOSCOM shall not beobligated to replace or repair equipment that has been damaged by fire,

war, acts of God, or similar causes, or equipment that has been serviced by unauthorized

personnel, altered,improperly installed or abused.

This Returnand Warranty Policy Statement applies to VOSCOM equipment purchased directly

from VOSCOMTechnology Co.,Ltd. If you did not acquire the VOSCOM equipment directly, return

the equipmentto the place of purchase.

Returning VOSCOM products

Before youcan return any product to VOSCOM, you mustobtain a Return Material Authorization

(RMA). Thisapplies to all product returns, including warranty repair/replacements, nonwarranty

repairs, advancereplacements, and credit returns.

To obtain an RMA, (Download from www.voscom.com), and please complete the RMA asmuch

detail aspossible, thensend the RMA to our customer service support:

FAX: +86-571-87389390

E-mail: [email protected]

Customer Servicewill provide you with an RMA number andan RMA acknowledgment form that

confirms yourrequest.

Once youhave theRMA, repackage the product appropriately and attach the RMA

acknowledgement formon the outside of the package. Then send the product to the return

location givenby the customer service center.

All productsmust be returned freight prepaid within 30days of obtaining an RMA. We reserve

the rightto cancel the RMA after 30 days. If you fail to returnthe product within the 30 days,

please contactCustomer Service to get a new RMA.

We will not accept unauthorized returns or freight collection returns; we will return these to

you atyour expense.

If areturned product contains parts that are no longer available orrepairable, wewill contact

you todiscuss resolution and return of the material.

Website:www.voscom.com

En_9

Warranty repair/replacements

Subject to the terms of thelimited warrantyin effect at the time of purchase, VOSCOM will

repair or replace a product that fails to meet the terms provided,within the product's warranty

period. The actual warranty period starts from either:

a): The dateof shipment from VOSCOM's facility (point of origin)

b): The manufacturer'sdate code (if the shipment date is unknown).

For allwarranty repairs, VOSCOM will coverparts and labor. We willreturn equipment via the

same incomingshipment methodat no additional charge.

Non-warranty repairs

For allnon-warranty repairs, VOSCOMwill provide you with a repair estimate that includes

charges for parts, labor (in half-hourincrements), and all shipping. Repair chargesmay be

based on a flatrate or parts and labor, andwill varybased on actual equipment and condition.

You may payfor non-warranty repaircharges by purchase order.

Advance replacement

Advance replacementproducts are new or like-new refurbished products and carry a full original

equipment warranty. VOSCOM will send advance replacementproduct to replace defective

equipment that has failed upon initial install for up to 60 daysfrom the original date of shipment.

We will ship advance replacements in the next business day.

Our repair department will evaluate thereturned product to determine whether it is a warranty

or non-warranty replacement and bill you accordingly. We will invoice advance replacements at

shipment and credit youupon receipt of the defective product. If we determine, however, that the

returned product is in good working order or that performance issues were due to improper

installation, misuse, abuse, or other user-relatedcauses, we will issue no credit and you will

remain responsible for payingthe invoice.

Note: Advance replacementis not available forcustom products.

Credit returns

VOSCOM will refund or credit new, standard production items that are unused and in the original

unopened shipping cartons for a period of 60 days fromthe original date of shipment. All returned

merchandise is subject to a 20% restocking fee. Products that have failedupon initial install within

60 daysfrom the date of shipment (or date of manufacture if shipment date is unknown) may be

returned for credit without a restocking fee. (Products purchased as part of a kit must be returned

through Advance replacement.)

As withadvance replacements,if we determine that the returnedproduct isin good working

order orthat performance issues were due to improper installation, misuse, abuse, or other

user-related causes,we will issue no credit and you will remain responsible for payingthe invoice.

Note: Credit isnot availablefor custom products.

Return & Warranty Policy

Website:www.voscom.com

Ce manuel convient aux modèles suivants

Table des matières

Autres manuels Voscom Système de microphone

Voscom

Voscom VOS-8800FFT Series Manuel utilisateur

Voscom

Voscom VOS-2FOM-D422T Series Manuel utilisateur

Voscom

Voscom VOS-24000FT Series Manuel utilisateur

Voscom

Voscom VOS-20101FDET Series Manuel utilisateur

Voscom

Voscom VOS-4020FDT/R Series Manuel utilisateur

Voscom

Voscom VOS-0800DT Series Manuel utilisateur

Voscom

Voscom VOS-1FOM-D422T Series Manuel utilisateur

Voscom

Voscom VOS-2010FBT Series Manuel utilisateur

Voscom

Voscom VOS-0100FT/R Series Manuel utilisateur

Voscom

Voscom VOS-11101FDDET Series Manuel utilisateur

Voscom

Voscom VOS-4410FFDT/R Series Manuel utilisateur

Voscom

Voscom VOS-1100FDT Series Manuel utilisateur

Voscom

Voscom VOS-1DH3G-ADT/R Series Manuel utilisateur

Voscom

Voscom VOS-160101FDET Series Manuel utilisateur

Voscom

Voscom VOS-16010FDT/R Series Manuel utilisateur

Voscom

Voscom VOS-4FOM-SCCT/R Series Manuel utilisateur

Voscom

Voscom VOS-4FOM-D422T Series Manuel utilisateur

Voscom

Voscom VOS-48000FT/R Series Manuel utilisateur

Manuels Système de microphone populaires d'autres marques

Paso

Paso R824 Manuel utilisateur

Naxa

Naxa NAM-982 Manuel utilisateur

Motorola

Motorola PMNN4461 Manuel utilisateur

Xvive

Xvive U3 Manuel utilisateur

Tekon

Tekon DUOS Manuel utilisateur

Heyuan Intelligence

Heyuan Intelligence IOT-G2S-01 Manuel utilisateur

Devine

Devine WMD-IE Manuel utilisateur

LG LF-D7150 Manuel utilisateur

GE S768DAV Manuel utilisateur

LD U305 HBH 2 Manuel utilisateur

Chainway

Chainway URA8 Manuel utilisateur

ORATOR

ORATOR D860TD Manuel utilisateur

Sennheiser

Sennheiser Evolution Wireless Digital EW-DX EM 2 Manuel utilisateur

Alpha Technologies

Alpha Technologies RBMS Manuel utilisateur

SWIT Electronics Co.,LTD.

SWIT Electronics Co.,LTD. CW-S150 Manuel utilisateur

Shure

Shure UA844 Manuel utilisateur

Panasonic

Panasonic SHFX70 - DVD HOME THEATER WIRELESS SYSTEM Manuel utilisateur

Pyle

Pyle PDWM5000 Manuel utilisateur