Vornado SRTH Manuel utilisateur

model SRTH

READ AND SAVE THESE INSTRUCTIONS

Small Room Tower Heater Owner’s Guide

LEER Y GUARDAR ESTAS INSTRUCCIONES

Guía para el propietario del calefactor vertical

para ambientes pequeños

www.vornado.com

2English

Designed, engineered and supported in Andover, Kansas.

Pensado, diseñado y respaldado en Andover, Kansas.

Questions or comments?

¿Prequntas o comentarios?

www.vornado.com

[email protected]

800.234.0604

English

Español p. 12

Important Instructions ........................................................................ 4

Vornado V-Flow™ Heat Circulation.................................................... 6

Controls............................................................................................... 7

How To Use ......................................................................................... 8

Advanced Safety Features.................................................................. 9

Cleaning and Storage ......................................................................... 9

Troubleshooting ............................................................................... 10

Operating Tips .................................................................................. 10

Warranty............................................................................................ 11

Contents

4English

Please visually inspect all internal and external components before

connecting to electric current. If any damage is found, DO NOT USE

THIS UNIT and contact Vornado Air LLC at 1-800-234-0604.

This appliance has a polarized plug. (One blade is wider than the

other.) To reduce the risk of electrical shock, this plug is intended to ﬁt

in a polarized outlet only one way. If the plug does not ﬁt fully in the

outlet, reverse the plug. If it still does not ﬁt, contact a qualiﬁed electri-

cian. Do not attempt to defeat this safety feature.

When using electrical appliances, basic precautions should always

be followed to reduce the risk of ﬁre, electric shock, and injury to

persons, including the following:

Read all instructions before using this heater.

This heater is hot when in use. To avoid burns, do not let bare skin

touch hot surfaces. Use handles when moving this heater. Keep

combustible materials, such as furniture, pillows, bedding, papers,

clothes, and curtains at least 3 feet (0.9 m) from the front of the

heater and keep them away from the sides and rear.

Extreme caution is necessary when any heater is used by or near

children or invalids and whenever the heater is left operating

and unattended.

Always unplug heater when not in use.

Do not operate any heater with a damaged cord or plug or after

the heater malfunctions, has been dropped or damaged in any

manner. Discard heater, or return to authorized service facility for

examination and/or repair in order to avoid hazard.

Do not use outdoors.

This heater is not intended for use in bathrooms, laundry areas and

similar indoor locations. Never locate heater where it may fall into a

bathtub, shower, swimming pool or other water container.

Do not run cord under carpeting. Do not cover cord with throw

rugs, runners, or similar coverings. Do not route cord under

furniture or appliances. Arrange cord away from trafﬁc area and

where it will not be tripped over.

To disconnect heater, turn controls to off, then remove plug from

outlet.

Do not insert or allow foreign objects to enter any ventilation or

exhaust opening as this may cause an electric shock or ﬁre, or

damage the heater.

To prevent a possible ﬁre, do not block air intakes or exhaust in any

manner. Do not use on soft surfaces, like a bed, where openings

may become blocked.

A heater has hot and arcing or sparking parts inside. Do not use

it in areas where gasoline, paint, or ﬂammable liquids are used or

stored.

Use this heater only as described in this manual. Any other use not

recommended by the manufacturer may cause ﬁre, electric shock,

or injury to persons.

Always plug heaters directly into a wall outlet/receptacle. Never

use with an extension cord or relocatable power tap (outlet/power

strip).

Operate this heater only in its upright position.

This heater is equipped with a thermal safety shut-off system,

designed to turn off the heater when an internal overheating

IMPORTANT INSTRUCTIONS

READ ALL INSTRUCTIONS BEFORE USING THIS HEATER.

English

SAVE THESE INSTRUCTIONS

IMPORTANT INSTRUCTIONS

READ ALL INSTRUCTIONS BEFORE USING THIS HEATER.

condition is detected (see How To Use “RESETTING YOUR

VORNADO HEATER,” to determine how to check and

reset the heater on page 8).

Do not operate this product with any electronic speed-control

device on the same circuit.

Do not use heater to dry human or animal hair/fur or articles of

clothing.

CAUTION: In order to avoid a hazard due to inadvertent resetting

of the thermal cutout, this appliance must not be supplied through

an external switching device, such as a timer, or connected to a

circuit that is regularly switched on and off by the utility.

WARNING: Changes or modiﬁcations to this unit not expressly

approved by the party responsible for compliance could void the

user’s authority to operate the equipment.

Note: This equipment has been tested and found to comply with the

limits for Class B digital device, pursuant to part 15 of the FCC Rules.

These limits are designed to provide reasonable protection against

harmful interference in a residential installation. This equipment

generates, uses and can radiate radio frequency energy and, if not

installed and used in accordance with the instructions, may cause

harmful interference to radio communications. However, there is no

guarantee that interference will not occur in a particular installation. If

this equipment does cause harmful interference to radio or television

reception, which can be determined by turning the equipment off and

on, the user is encouraged to try to correct the interference by one or

more of the following measures:

Reorient or relocate the receiving antenna.

Increase the separation between the equipment and the receiver.

Connect the equipment into an outlet on a circuit different from

that to which the receiver is connected.

Consult the dealer or an experienced radio/TV technician for help.

This device complies with part 15 of the FCC Rules. Operation

is subject to the following two conditions: (1) This device may

not cause harmful interference, and (2) his device must accept

any interference received, including interference that may cause

undesired operation.

6English

Trust.

It is said that trust isn’t given, but earned. For decades Vornado has been

earning the trust of our customers by offering them only the best. Vornado

provides the highest level of performance, coupled with the highest level of

support available. Complete satisfaction with no exceptions – this is Vornado’s

promise to you. If you are not satisﬁed for any reason, please contact us.

Knowledgeable representatives are available at 1-800-234-0604 from 7:00 AM

to 6:00 PM CST. A wealth of additional support is also available online at

www.vornado.com. On behalf of myself and the entire staff at our Andover,

Kansas headquarters – thank you for selecting Vornado.

Sincerely,

Bill Phillips

CEO, Vornado Air

Find our complete product line at www.vornado.com

V-Flow™Heat Circulation

Ordinary heaters provide only localized heat. Heat immediately

rises to the ceiling, resulting in cold and hot spots in the room.

Vornado’s unique V-Flow Action delivers continuous, uniform

heat, surrounding everyone in the room in a warm, comfortable

temperature without the need for oscillation.

Ordinary Tower Heater

Without Adequate Heat Circulation

Vornado SRTH

With Signature V-Flow™ Heat Circulation

English

Controls

1Mode Switch

Select ( ), (I) or (II) to turn unit On. LED light illuminates when

the unit is On. Select (o) to turn unit Off.

Timer

Press ( ) to set timer for 4 hours. LED light illuminates when

timer is set.

Fan Only

In the Fan Only position ( ), the Fan will run continuously.

Heat Setting

(I) Low Heat (maximum of 450 watts), (II) High Heat (maximum of

900 watts).

8English

Positioning Your Vornado Heater

Position your heater so the V-Flow distribution of warm air

is directed across the room, unobstructed. Position it in a

location that is representative of the room temperature. Avoid

areas of temperature extremes such as cold drafts and heat

registers (see IMPORTANT INSTRUCTIONS for safe placement

on page 4).

Placement near a wall or corner

Please position at least 6” away

from walls or other large surfaces.

Doing so will ensure your Small

Room Tower Heater has adequate

room to intake air, providing

optimum performance.

Directing the airﬂow

Unlike any other tower heater,

this product creates a wide

span of airﬂow called V-Flow™

Circulation eliminating the need

for oscillation. The Vornado logo

indicates the center point of the

V-Flow™ airstream, and can be

used as a reference point for

positioning the product in the

room.

How To Use

Using your Vornado Heater

Just follow these simple steps.

1. Plug Power Cord into standard wall outlet.

2. Select (II) for High Heat or (I) for Low Heat.

3. Press Timer ( ) to set timer for 4 hours.

4. Select Fan Only ( ) for Continuous Fan.

Resetting Your Vornado Heater

Your Vornado Heater has a multi-level safety shut-off system designed

to prevent overheating. Overheating may occur when the inlets

or outlet are blocked or a foreign object prevents the blade from

turning. If this happens, the safety shut-off system will cut power to

the heat element and you will need to manually reset the heater.

1. Turn the Power to Off (o) and unplug the unit.

2. Remove any obstructions.

3. Wait 5 –10 minutes, allowing the unit to cool down.

4. Plug in the unit and place in desired position.

5. Turn the Mode Switch to ( ), (I) or (II). Your Vornado Heater should

now function normally.

Note: If the safety shut-off system repeatedly shuts off your heater

or if it will not reset after following the above procedure, DO NOT

ATTEMPT TO DISASSEMBLE THE UNIT. Call Vornado Consumer

Services Department toll-free at 1-800-234-0604.

6”

English

Tight Grill Spacing

Resists curious ﬁngers.

Cool Touch Case

Safe to touch, even on high heat setting.

Automatic Safety Shut Off System and

Tip-Over Protection

If airﬂow becomes blocked and overheating occurs,

power to the heating element is shut off. If tipped

more than 10 degrees in any direction, heat and fan

functions immediately shut down.

Ideal 140°F Exit Air Temperature

Warm enough to heat your personal space.

Cleaning and StorageAdvanced Safety Features

How to Clean

Your heater has no user serviceable parts. Do not disassemble the

unit. This will void your warranty. If service is required, return your

heater to Vornado (see WARRANTY for instructions on page 11).

The motor is permanently lubricated and requires no oiling.

Because your heater moves a sub-

stantial amount of air, it will need

regular cleaning. To clean follow

these simple instructions:

1. Unplug the unit.

Note: Do not use gasoline, thin-

ners, solvents or other chemicals

for cleaning.

2. Use the brush attachment on your household vacuum cleaner to

vacuum any accumulated dust off the Front Angled Outlet Grill

and Side Inlet Grill. Wipe down the entire surface with a soft cloth.

Storage

During the off-season or after extended periods of non-use, you may

choose to store your heater. To ensure long life of the product, it is

recommended to store your heater by following these instructions:

1. Unplug power cord and bundle loosely.

2. Thoroughly clean your heater (see instructions above).

3. Cover, or place back in retail carton if available. This will prevent

the unit from accumulating dust overtime.

4. Store unit in a cool and dry location.

View how to clean your

Vornado heater on your

mobile device.

10 English



In smaller areas, you might prefer to set the mode switch to LOW.



In larger spaces, your Vornado® Small Room Tower Heater will function

most effectively with the MODE switch set to HIGH. In the HIGH position, the

ﬂow of air will gently keep the air circulating in the room for even, uniform

heating.



Your SRTH can function as a personal fan for cooling.



Your SRTH draws up to 7.5 amps of electric current. If using your SRTH on

HIGH HEAT causes your home’s circuit breaker or fuse to trip, we offer the

following suggestions:

• Try turning off other electrical appliances that run on the same circuit as

your SRTH.

• Run your heater on LOW HEAT.

• Have your electrician add an additional circuit to your home’s electrical

system.



ALWAYS USE COMMON SENSE WHEN USING THIS AND/OR ANY

ELECTRICAL APPLIANCE.

Operating Tips

Troubleshooting

Unit is not plugged in. Plug Power Cord into electrical outlet.

Tip-over switch is not making contact with the ﬂoor. Place heater on a level surface to ensure tip-over switch is making full

contact with the ﬂoor.

Household circuit breaker / ground fault interrupter has tripped or blown a fuse. Reset circuit breaker / ground fault inter-

rupter, or replace fuse (See OPERATING TIPS below).

The unit has overheated. Automatic Safety Shut-Off has been initiated (See RESETTING YOUR VORNADO HEATER on page 8).

Unit is damaged or in need of repair. Cease usage and unplug. Contact Consumer Service for assistance.

Ensure unit is set to highest Temperature setting.

Close all doors and windows to retain heat.

Allow the unit to fully distribute the heat throughout the room, this may take several minutes.

Unit fails to

power on.

Unit is not pro-

ducing sufﬁcient

amount of heat.

Problem Possible Cause and Solution

Autres manuels pour SRTH

Table des matières

Langues :

Autres manuels Vornado Chauffage

Vornado

Vornado IR405 Manuel utilisateur

Vornado

Vornado DVTH Manuel utilisateur

Vornado

Vornado Vortex Heater VH2 Manuel utilisateur

Vornado

Vornado VH200-EU Manuel utilisateur

Vornado

Vornado VMH500 Manuel utilisateur

Vornado

Vornado ATH1 Manuel utilisateur

Vornado

Vornado TVH500 Manuel utilisateur

Vornado

Vornado iControl Manuel utilisateur

Vornado

Vornado OSCTH1 Manuel utilisateur

Vornado

Vornado EH1-0116-43 Manuel utilisateur

Vornado

Vornado SRTH Manuel utilisateur

Vornado

Vornado Vortex Heater VH2 Manuel utilisateur

Vornado

Vornado Velocity 3R Manuel utilisateur

Vornado

Vornado VMH10 Manuel utilisateur

Vornado

Vornado TVH500 Manuel utilisateur

Vornado

Vornado iControl Manuel utilisateur

Vornado

Vornado VMH505 Manuel utilisateur

Vornado

Vornado MVH Manuel utilisateur

Vornado

Vornado EVH201 Manuel utilisateur

Vornado

Vornado VH101 Manuel utilisateur

Vornado

Vornado TH20 Manuel utilisateur

Vornado

Vornado TAVH10 Manuel utilisateur

Vornado

Vornado VH10 Manuel utilisateur

Vornado

Vornado TVH500 Manuel utilisateur

Manuels Chauffage populaires d'autres marques

oventrop

oventrop Regucor Series Manuel utilisateur

Blaze King

Blaze King CLARITY CL2118.IPI.1 Manuel utilisateur

ELMEKO

ELMEKO ML 150 Manuel utilisateur

BN Thermic

BN Thermic 830T Manuel utilisateur

KING

KING K Series Mode d’emploi

Empire Comfort Systems

Empire Comfort Systems RH-50-5 Guide de démarrage rapide

Well Straler

Well Straler RC-16B Manuel utilisateur

EUROM

EUROM 333299 Manuel utilisateur

Heylo

Heylo K 170 Manuel utilisateur

Eterna

Eterna TR70W Manuel utilisateur

Clarke

Clarke GRH15 Mode d’emploi

IRSAP

IRSAP The Radiator Company Ovali Manuel utilisateur

Empire Heating Systems

Empire Heating Systems WCC65 Manuel utilisateur

Wetekom

Wetekom 92 86 43 Manuel utilisateur

Desa

Desa SPC170-F Manuel utilisateur

Watlow

Watlow Watrod Electric Tubular Heaters Manuel utilisateur

Haverland

Haverland ECO-DRY GPS Series Manuel de la liste des pièces

Stelpro

Stelpro ASILVC2060 Series Manuel utilisateur