KEY MEMORIZING AND ERASING FROM THE CONTROL UNIT MEMORY
“Key No…- User”
MASTER-key memorizing
PRG
PRG
N
ACCESS keys memorizing
N
GUARD keys memorizing
N
ACCESS and GUARD keys erasing
1
“Key No…- User”
N2
’S
EXAMPLES OF WIRING DIAGRAMS
ote.
ote.
ote.
Note .
ote .
keys the installation
C U R 300M (or button for exit) the
diagrams given in the section .
T are
and
Lost key erasing
U memorizes 2680
, 28 , approach
close ’s antenna Make records of key numbers and their users, for this list
( ) may be
Take off the Control Unit’s cover remove
is ing
Approach close ’s antenna are sounding: the MASTER-key has been
memorized. affect
put the cover back
f have been approached to the reader’s antenna only will be
Move the close to ’s antenna and hold it
are ing
roach a key close ’s antenna to memorize it as an S
are ing: the key has been memorized.
Asingle indicates : in the memory, the key is faulty
To memorize the next , approach a new key close ’s antenna
When done with memorizing, approach to the reader’s antenna.After two , approach
the reader to the
After 2680 ’ have been memorized, are ing s
not available
Move the close to ’s antenna and hold it
are ing
300M . O is sounding the is illuminating
roach a key close ’s antenna to memorize it as a GUARD are
ing: the key has been memorized.
To memorize the next GUARD , approach a new key close ’s antenna
When done with memorizing, approach to the reader’s antenna, the system will return the
.
After 28 have been memorized, are ing
not available
Move the close to ’s antenna and hold it
are ing
Approach to the reader’s antenna, t are sounding the is illuminating
roach you want to ’s antenna are ing: this key has been
deleted from the system’s memory
Asingle indicates : does not in the memory.
To erase the next , approach it close ’s antenna
When done with erasing, approach to the reader’s antenna, the system will return the
.
After the key has been erased, its is cleared F on, d key
memory when list
may only
Memorizing of ACCESS, GUARD and MASTER-key is recommended to be performed before .
To memorize or erase keys, connect the ontrol nit, eader and EXIT button following
he following modes available:
MASTER-key memorizing
ACCESS GUARD keys memorizing / erasing
Erasing of all data
The Control nit each key code in the next free memory cell numbering them from No1 up to No
for ACCESS keys and from No1 up to No for GUARD keys. Enumerate ACCESS keys beforehand and them
one by one to the reader during memorizing.
useful for key management in case of a lost key.
Turn the power off.
and the jumper.
Turn the power on. A long beep sound .
a key to the reader . One short and two long beeps
MASTER-key memorizing does not other settings.
To quit this mode, turn the power off, restore the jumper to its place and .
I several keys , the last one memorized as the
MASTER-key.
MASTER-key the reader for 5 seconds at least. The lock is released, short
beeps and three long beeps sound . Take the MASTER-key off before the third long beep ends.
App to the reader ACCES key. One short and one long beep
sound
long beep (without a short one) an error the key already exists or .
ACCESS key to the reader , and so on.
the MASTER-key briefly long beeps
it again to return to ACCESS mode.
user s keys 5 short beeps sound . Further memorizing of ACCESS key is
.
MASTER-key the reader for 5 seconds at least. The lock is released, short beeps
and three long beeps sound . Take the MASTER-key off before the third long beep ends.
Press the EXIT button briefly ne long beep , LED .
App to the reader key. One short and one long beep
sound
key to the reader , and so on.
the MASTER-key briefly to
ACCESS mode
GUARD keys 5 short beeps sound . Further memorizing of GUARD keys is
.
MASTER-key the reader for 5 seconds at least. The lock is released, short beeps
and three long beeps sound . Take the MASTER-key off before the third long beep ends.
the MASTER-key briefly wo long beeps , LED .
App a key erase to the reader . One short and one long beep sound
.
long beep (without a short one) an error the key exist
key to the reader , and so on.
the MASTER-key briefly to
ACCESS mode
memory cell . urther uring memorizing, a key code will be
stored in the first clear cell found. Take it into account managing .
Key No1 (ACCESS or GUARD) be erased under condition of all keys erasing.
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
www. VIZIT-KTM602F Operating Instruction (revision )vizit-group.com 10 11/201 -603
