Vivitek DU8090Z Manuel utilisateur

Ultra Short Throw Lens – Installation Guide

Table of Content

Important Notice ................................................................................................................................2

Packing Check List............................................................................................................................2

Projection Lens Overview.................................................................................................................3

Installing the Projection Lens...........................................................................................................4

Projection Distance and Size............................................................................................................9

Projection Lens Specifications.......................................................................................................10

Projection Lens Dimensions...........................................................................................................10

About the VIVITEK Support ............................................................................................................11

Ultra Short Throw Lens – Installation Guide

Important Notice

Before using the Ultra Short Lens, make sure to read below important notice.

Be sure to turn the power off and disconnect the power cable from the wall outlet before replacing the Lens. Improper

operation may cause to electrical shock or injury to eyes by intense light from the projector.

Please remove the lens cap before installing the lens to the projector, the projection light may heat the lens cap and

melt it, this may raise safety issue or damage the projector.

Make sure the projective film on the Lens is removed before turning on the projector; the protective film may be melt

during projection then resulting in damage or deformation.

Do not place any object near the projection light path, the intense light from the projection lens may result in fire or burn

injures.

Use a clean, soft and dry cloth or Lens cleaning wipes to wipe away dirt or dust adhered on the lens.

Do not use the cloth containing oil, dust or water for cleaning. Once dust and dirt adhered on the lens surface, please

clean the glass with lens cleaning wipe.

Keep all the original packing material even you finish the installation, the packing material may be used for avoiding

damage during transportation.

Packing Check List

Item Part Description Qty.

Ultra short throw with adaptor bracket

Bracket assembly

This bracket assembly is composed by one base bracket and four

arms, it’s is a part of support kit for joining Ultra Short Throw Lens

and the projector. Use flat screw to fix the bracket assembly on

the bottom of the projector and joint the arm with projection lens

by hex socket cap screw.

Flat screw 4*0.7*20mm:

The screws are used for fixing bracket assembly to the bottom of

the projector

Hex socket cap screw, 6*1*14 mm

Hex socket cap screws are used for jointing the arm of bracket

assembly and the projection lens.

Wrench

The wrench is used to drive hex socket cap screw

Ultra Short Throw Lens – Installation Guide

Projection Lens Overview

Note

There is one lens cap to cover the lens cap, please remove the lens cap before installing the lens to the projector. The

projected light may heat the lens cap and melt it; it may raise safety issue or damage the projector.

One protective film is attached on projection light outlet for avoiding scratch or dust on this protection surface, please

remove the protective film before tuning on the projector. Improper operation may cause to the projective film.

Projection light outlet Mounting bracket

(Screw holes x 2, Guide Pin x 2)

Motor for Focus Adjustment

Motor for Focus Plane Adjustment

Lens Surface

Ultra Short Throw Lens – Installation Guide

Installing the Projection Lens

Before Installing the Projection Lens

The lens is designed to allow large image projection, which allowable throw distance is limited. The image is projected to

the rear of the projector through the front top of the projector. For the best projected image quality, please take close

notice on the following points:

Make sure all the accessories are ready.

Make sure that the projector power supply is switched off before attaching or detaching the projection lens

Place the projector on a flat table; this can be helpful to install the projection lens more convenient.

Do not touch the electric contact points of the projection lens or it may cause to contact malfunctions.

Do not touch the glass of the lens, the fingerprints or smudges on the glass may be magnified and lower the quality of

Projected image.

After removing the projection lens, store it safely away from vibration or impacts. Suggest you to keep it in the original

package after you take it out from the projector

Make sure to loosen the screws at the joints of support kits before fine tuning the lens position or performing Center

Lens function, improper operation may cause to malfunctioned Lens shift or damage the projection lens.

Make sure Lens type setting is changed to Non-UST Lens from OSD menu once you change to other projection lens.

The default lens position of Ultra short Throw Lens (UST Lens) is different to other zoom lenses; the setting may limit

the lens shift range and move the lens to different initial lens position after you perform Center Lens function.

Make sure Lens Control Lock on OSD is disabling before performing lens adjustment. The Lens Shift, Zoom, Focus

and Center Lens functions are disabled if turning on Lens Control Lock.

For best projection effect, recommend to use flat screen and place the projector in parallel with the projector. The

image may be distorted if the projection screen is not flat or not in parallel with the rear of projector,

Check if the support kit is installed properly if the projection image is not clear after adjusting the focus and focus plane

Starting the lens Installation

1. Turn over the projector as below figure, the front of the projector is aligned with the edge of the table. This can help

you installing the projection lens more convenient.

2. Assemble bracket assembly on the bottom of the projector with two flat screws

Align the hole on the bracket with two guide pin on the bottom of the projector, use screw driver to fix two flat screws

as below figure.

Ultra Short Throw Lens – Installation Guide

3. Turn over the projector to the front as below figure.

4. Align the "↑" symbol on the lens label with the "* " symbol on the top cover of the projector (align to the center of the

lens hole), and pull in the lens. Make sure the lens is pushed into the holder and turn it clockwise to the "Lock"

position.

Note:

Before installing the lens on the projector, recommend to place the projector on a table and the front of the

projector is aligned with the edge of the table. This can help you installing the projection lens more convenient.

5. Adjust the projecting position of Lens:

a. Plunge in the power cable

b. Turn on the AC switch then turn the projector on by power button.

CAUTION:

Make sure the projective film on the Lens is removed before turning on the projector; the protective film may be melt

during projection then resulting in damage or deformation.

Ultra Short Throw Lens – Installation Guide

c. Enter OSD menu then select Lens type option on ALIGNMENT page, press Enter or ►button to choose UST Lens

option. The projector can move the lens to initial workable position for Ultra Short Throw lens automatically after

performing Center Lens function as following step.

d. Perform Center Lens function to calibrate projection lens by the control button or OSD menu, the calibration can get

more precise lens adjustment and move the lens to workable position automatically for the projection.

Note:

Setting Lens type option to UST Lens will change the default lens position after performing Center Lens function,

please select UST Lens in this option if using ultra short throw lens. Otherwise, please select non-UST lens.

Improper setting may limit the lens shift range and move the lens to incorrect default position after performing

Center Lens function.

6. .Fine tune the projected image position

The initial position can get best projection performance, some of Vivitek projectors may offers wider adjustable shift

range for flexibility in installation, the adjustable shift range are ±5% in horizontal shift, +7% for moving up, -3% for

moving down. Please tune the lens shift to desired position by Lens Shift buttons on the control panel or remote

control, and check the projection performance.

Note:

Make sure to loosen the screws at the joints of support kits before fine tuning the lens position or performing

Center Lens function, improper operation may cause to malfunctioned Lens shift or damage the projection lens.

7. Attach the metal arm to the bracket on the projection lens

Use two screws to attach the metals arm to the bracket on the projection lens as below figure, the screws shall be kept

loose till you finish all of necessary lens shift adjustment.

Ultra Short Throw Lens – Installation Guide

8. Tighten the screws to fix the projection lens

Hold the lens and lift it a little in the opposite direction of gravity and use wrench to tighten each screw according to the

sequence as below illustration.

Table Installation

Ceiling Installation

Note:

The projection lens is fixed firmly after you tighten the screws; make sure to loosen all of the screws on the

support kits before operating Lens Shift or Lens Center function.

Some of Vivitek projectors may offer wider adjustable shift range for flexibility in installation, the initial position by

Center Lens can get best projected performance please check the performance of the projected image if adjusting

the lens position.

Ultra Short Throw Lens – Installation Guide

9. Adjust the focus and focus plane.

The lens is equipped with powered adjustment for the focus and focus plane, you can adjust the focus effect by

ZOOM or FOCUS button on the remote control or control panel.

Focus Adjustment : Adjust focus effect by FOCUS +/- buttons

ZOOM +/- buttons: Adjust the focus plan by ZOOM+/- buttons

a. Press FOCUS+ or FOCUS- button and check the focus effect on central area of the screen till the image becomes

clear and the focus effect is acceptable.

b. Check top and bottom area of the projected image if the image is clear. If not, press ZOOM+ or ZOOM – button to

adjust the focus plane to get the clear image on top or bottom area.

c. Repeat a and b till full image becomes clear.

Note.

For best projection effect, recommend to use flat screen and place the projector in parallel with the projector. The

image may be distorted if the projection screen is not flat or not in parallel with the rear of projector,

Check if the support kit is installed properly if the projection image is not clear after adjusting the focus and focus

plane.

10. Lock the Lens control

If your projector is with Lens Lock function on OSD, recommend to lock the Lens Control for avoiding disoperation or

unauthorized lens adjustment after you finish the installation and adjustment.

Note:

After the projection lens is fixed by support kit, improper lens shift operation may cause to imprecise lens shift

adjustment or damage. Before adjusting the lens position, please make sure all of hex socket cap screws at the

joints are loosen, the arm or bracket can be moved.

In case of disoperation on lens control function happens, please detach the hex socket cap screw then perform

Center Lens function to calibrate the lens parameter for precise lens adjustment.

Ultra Short Throw Lens – Installation Guide

Projection Distance and Size

Project Distance and Image Size

SD : The diagonal length of the projected image

SW : Projected image width

SH : Projected image height

D1 : The distance from the screen to the rear cover of the projector

D2 : The distance from the screen to the front cover of the projector

D3 : The distance from the screen to the front edge of Ultra Short Lens.

H1 : The height from the bottom of the projector to the bottom edge of the projected image.

H2 : The height from the bottom of the projector to the center of the projected image.

H2 : The height from the bottom of the projector to the top edge of the projected image.

SD SW SH D3 D2 D1 H3 H2 H1

inch m inch m inch m inch m inch m inch m inch m inch m inch

100 2.17 85.26 1.36 53.36 0.85 33.42 0.56 22.12 -0.02 -0.95 2.08 81.97 1.40 55.25 0.73 28.61

110 2.38 93.80 1.49 58.71 0.92 36.40 0.64 25.10 0.05 2.03 2.28 89.63 1.53 60.24 0.79 30.92

120 2.60 102.32 1.63 64.04 1.00 39.38 0.71 28.08 0.13 5.01 2.47 97.25 1.66 65.21 0.84 33.22

130 2.81 110.82 1.76 69.37 1.08 42.36 0.79 31.06 0.20 7.99 2.66 104.90 1.78 70.19 0.90 35.53

140 3.03 119.33 1.90 74.69 1.15 45.34 0.86 34.04 0.28 10.97 2.86 112.53 1.91 75.17 0.96 37.83

150 3.25 127.83 2.03 80.02 1.23 48.32 0.94 37.02 0.35 13.95 3.05 120.15 2.04 80.14 1.02 40.13

160 3.46 136.36 2.17 85.36 1.30 51.30 1.02 40.00 0.43 16.93 3.25 127.81 2.16 85.13 1.08 42.45

170 3.68 144.89 2.30 90.70 1.38 54.28 1.09 42.98 0.51 19.90 3.44 135.45 2.29 90.11 1.14 44.75

180 3.90 153.42 2.44 96.04 1.45 57.25 1.17 45.96 0.58 22.88 3.63 143.10 2.42 95.10 1.20 47.06

190 4.11 161.95 2.58 101.39 1.53 60.23 1.24 48.93 0.66 25.86 3.83 150.76 2.54 100.09 1.25 49.37

200 4.33 170.47 2.71 106.73 1.61 63.21 1.32 51.91 0.73 28.84 4.02 158.40 2.67 105.07 1.31 51.67

210 4.55 179.03 2.85 112.09 1.68 66.19 1.39 54.89 0.81 31.82 4.22 166.08 2.80 110.07 1.37 53.99

220 4.76 187.57 2.98 117.44 1.76 69.17 1.47 57.87 0.88 34.80 4.41 173.74 2.92 115.06 1.43 56.30

230 4.98 196.11 3.12 122.80 1.83 72.15 1.55 60.85 0.96 37.78 4.61 181.40 3.05 120.05 1.49 58.61

240 5.20 204.65 3.26 128.15 1.91 75.13 1.62 63.83 1.04 40.76 4.80 189.07 3.18 125.04 1.55 60.92

Ultra Short Throw Lens – Installation Guide

SD SW SH D3 D2 D1 H3 H2 H1

inch m inch m inch m inch m inch m inch m inch m inch m inch

250 5.41 213.18 3.39 133.50 1.98 78.11 1.70 66.81 1.11 43.74 5.00 196.72 3.30 130.02 1.61 63.22

260 5.63 221.74 3.53 138.86 2.06 81.09 1.77 69.79 1.19 46.72 5.19 204.40 3.43 135.02 1.66 65.54

270 5.85 230.29 3.66 144.22 2.14 84.07 1.85 72.77 1.26 49.70 5.39 212.07 3.56 140.02 1.72 67.85

280 6.07 238.83 3.80 149.58 2.21 87.05 1.92 75.75 1.34 52.68 5.58 219.74 3.68 145.01 1.78 70.16

290 6.28 247.38 3.94 154.93 2.29 90.03 2.00 78.73 1.41 55.66 5.78 227.40 3.81 150.00 1.84 72.47

300 6.50 255.91 4.07 160.28 2.36 93.01 2.08 81.71 1.49 58.64 5.97 235.06 3.94 154.99 1.90 74.78

310 6.72 264.47 4.21 165.65 2.44 95.99 2.15 84.69 1.57 61.62 6.17 242.74 4.06 159.99 1.96 77.09

320 6.93 273.02 4.34 171.01 2.51 98.97 2.23 87.67 1.64 64.60 6.36 250.41 4.19 164.99 2.02 79.41

330 7.15 281.57 4.48 176.36 2.59 101.94 2.30 90.65 1.72 67.57 6.56 258.08 4.32 169.98 2.08 81.72

340 7.37 290.12 4.62 181.72 2.67 104.92 2.38 93.62 1.79 70.55 6.75 265.75 4.44 174.98 2.13 84.03

350 7.59 298.64 4.75 187.07 2.74 107.90 2.45 96.60 1.87 73.53 6.94 273.40 4.57 179.96 2.19 86.33

Projection Lens Specifications

F Value 2.0

Focus Length(f) 5.64mm

Throw Ratio 0:377:1, WUXGA, at 100” screen

Image Size

(Minimum/ Maximum Image Diagonal)l

100” – 350”

Focus Adjustment Powered focus and focus plane adjustment

Dimensions 309(W) x 419(D) x 168(H)mm

Net Weight Approx. 2.7Kg

Projection Lens Dimensions

(Unit: mm)

Autres manuels pour DU8090Z

Table des matières

Autres manuels Vivitek Projecteur

Vivitek

Vivitek DU8395Z Manuel utilisateur

Vivitek

Vivitek Qumi Q3 Plus Manuel utilisateur

Vivitek

Vivitek D-635MX Manuel utilisateur

Vivitek

Vivitek D950HD Manuel utilisateur

Vivitek

Vivitek DU8090Z Manuel utilisateur

Vivitek

Vivitek DH758UST series Manuel utilisateur

Vivitek

Vivitek DH286-ST Series Manuel utilisateur

Vivitek

Vivitek D5I80HD Manuel utilisateur

Vivitek

Vivitek DU4381Z-ST Manuel utilisateur

Vivitek

Vivitek Qumi Q2-L Series Manuel utilisateur

Vivitek

Vivitek D755WT SERIES Manuel utilisateur

Vivitek

Vivitek D326 Manuel utilisateur

Vivitek

Vivitek DU9800Z Manuel utilisateur

Vivitek

Vivitek D860 Series Manuel utilisateur

Vivitek

Vivitek D8300ST Manuel utilisateur

Vivitek

Vivitek D9 Series Manuel utilisateur

Vivitek

Vivitek D5380U Series Manuel utilisateur

Vivitek

Vivitek D8 Series Manuel utilisateur

Vivitek

Vivitek HK2299 Manuel utilisateur

Vivitek

Vivitek DU9057Z Manuel utilisateur

Vivitek

Vivitek D75 Series Manuel utilisateur

Vivitek

Vivitek DX977 Series Manuel utilisateur

Vivitek

Vivitek D965 Series Manuel utilisateur

Vivitek

Vivitek D5280U Manuel utilisateur

Manuels Projecteur populaires d'autres marques

iEmmet

iEmmet MP-312 Manuel utilisateur

Epson

Epson VS400 Manuel utilisateur

Sony

Sony VPL-HS10 Marketing Specifications & Features Manuel utilisateur

Sony

Sony VPL-HW65ES Manuel de service

Toshiba

Toshiba TLP-791U Manuel utilisateur

Philips

Philips LC1341 Guide de référence

Panasonic

Panasonic PTL735NTU - LCD PROJECTOR-NETWORK IB Manuel utilisateur

NEC

NEC NP600S EDU Manuel utilisateur

BenQ

BenQ SH753P Manuel utilisateur

Eiki

Eiki EK-623U series Manuel utilisateur

Epson

Epson PowerLite Pro Cinema 6020UB Manuel utilisateur

Epson

Epson PowerLite Home Cinema 705HD Manuel utilisateur

Christie

Christie LHD700 Manuel utilisateur

Navitar

Navitar FX Manuel utilisateur

InFocus

InFocus LitePro 560 Manuel utilisateur

Sony

Sony SRX-R815P Manuel utilisateur

Vivitar

Vivitar DP1500 X Manuel utilisateur

Acer

Acer C20 Series Manuel utilisateur