Vivitar V3625 Manuel utilisateur

Vivicam 3625 User

Manual

English

030211

FCC STATEMENT

This device complies with Part 15 of the FCC Rules. Operation is subject to the

following two conditions:

(1) this device may not cause harmful interference, and

(2) this device must accept any interference received, including interference that

may cause undesired operation

Note: This equipment has been tested and found to comply with the limits for

Class B digital devices, pursuant to Part 15 of the FCC rules. These limits are

designed to provide reasonable protection against harmful interference in a

residential installation. This equipment generates, uses and can radiate radio

frequency energy and, if not installed and used in accordance with the

instructions, may cause harmful interference to radio communications. However,

there is no guarantee that interference will not occur in a particular installation.

If this equipment does cause harmful interference to radio or television

reception, which can be determined by turning the equipment off and on, the

user is encouraged to try to correct the interference by one or more of the

following measures:

Reorient or relocate the receiving antenna.

Increase the separation between the equipment and receiver.

Connect the equipment into an outlet on a circuit different from that to which

the receiver is connected.

Consult the dealer or an experienced radio/TV technician for help.

Use of shielded cable is required to comply with Class B limits in Subpart B of

Part 15 of the FCC rules.

Do not make any changes or modifications to the equipment unless otherwise

specified in the manual. If such changes or modifications should be made,

you could be required to stop operation of the equipment.

TRADEMARK INFORMATION

Microsoft®and Windows®are U.S. registered trademarks of Microsoft

Corporation.

Pentium®is a registered trademark of Intel Corporation.

Macintosh is a trademark of Apple Computer, Inc.

SDTM is a trademark.

PhotoSuite, PhotoVista and the MGI logo are trademarks or registered trade-

marks of MGI Software Corp.

Adobe, the Adobe logo, and Acrobat are trademarks of Adobe Systems

Incorporated.

Other names and products may be trademarks or registered trademarks of

their respective owners.

READ THIS FIRST

Please start by reading the important messages below first.

1. The bundled driver, software, design, specifications and user’s manual that

packaged with the camera are subject to change without notice.

2. The accessories that come with the camera may vary between regions.

3. For driver update, you can contact the dealer who you purchased the camera

from for help.

4. We are not liable whatsoever for any compensation arising from errors in de-

scriptions in this user’s manual.

WARNINGS

Do not use the camera if it is emitting smoke, becomes unusually hot to be

touched, emitting any unusual odor or noise, or if it is in any other abnormal

states. Operating the camera in any of these situations may cause a fire or an

electrical shock. Stop using the camera immediately, turn the camera off, and

then disconnect the power source (batteries or AC power adapter). (If you are

using the AC power adapter, unplug the adapter from the AC power outlet

after you have disconnected the camera.) After checking that smoke is no longer

being emitted, contact your dealer or your local authorized service facility and

request repairs. Never attempt to repair the camera yourself as this is dangerous.

Do not use the camera if any foreign objects have entered the camera. Turn the

camera off, and then disconnect the power source (batteries or AC power

adapter). (If you are using the AC power adapter, unplug the adapter from the

AC power outlet after you have disconnected the camera.) Then contact your

dealer or your local authorized service facility. Do not continue to use the cam-

era as this may cause a fire or an electrical shock.

If the camera has been dropped or if the camera case has been damaged, turn

the camera off, and then disconnect the power source (batteries or AC power

adapter). (If you are using the AC power adapter, unplug the adapter from the

AC power outlet after you have disconnected the camera.) Then contact your

dealer or your local authorized service facility. Do not continue to use the cam-

era as this may cause a fire or an electrical shock.

Do not place the camera in any unstable locations such as on a wobbly table or

sloping surface where the camera may fall or tip over and cause injury.

Do not expose the camera to moisture and make sure that there is no water

getting into the camera. Take particular care when using the camera under

extreme weather conditions such as rain or snow, or when operating the cam-

era at the beach on near water. Water in the camera may cause a fire or an

electrical shock.

Do not attempt to modify the camera. This may cause a fire or an electrical

shock.

Do not remove the camera casing. This may cause an electrical shock. Internal

inspection, maintenance and repairs should only be carried out by your dealer

or local authorized service facility.

Do not touch the power plug during a thunderstorm if you are using the AC

power adapter. This may cause an electrical shock.

CAUTIONS

Do not place the camera in damp or dusty locations. This may cause a fire or an

electrical shock.

Do not place the camera in a location affected by oil fumes or steam, such as

near a cooking stove or humidifier. This may cause a fire or an electrical shock.

Exposure to high temperatures may adversely affect the camera case and in-

ternal components and may cause a fire.

Do not cover or wrap the camera or the AC power adapter with a cloth or quilt.

This may cause heat to build up and distort the case and cause a fire. Always

use the camera and its accessories in well-ventilated locations

Handle the camera carefully and do not bump the camera into any hard object.

Handling the camera roughly may cause a malfunction.

Do not move the camera while it is switched on. (If you are using the AC power

adapter, unplug the adapter from the AC power outlet after you have switched

off the camera.) Ensure that any connector cords or cables to other devices are

disconnected before moving the camera. Failure to do so may damage the

cords or cables and cause a fire or an electrical shock.

When leaving the camera unused for long periods, such as during a vacation,

always unplug the camera from the power source (batteries or AC power

adapter) for safety. (if you are using the AC power adapter, unplug the adapter

from the AC power outlet after you have disconnected the camera.) Failure to

do so could result in a fire.

Do not use batteries other than those specified for use with the camera. The

use of unsuitable batteries may result in the batteries splitting or leaking and

causing a fire, injury, or soiling of the battery compartment.

When fitting batteries into the camera, check the polarity markings on the bat-

tery (- and +) to ensure that you insert the battery correctly. Incorrect battery

polarity may result in the batteries splitting or leaking and causing a fire, injury,

or soiling of the battery compartment.

Remove the batteries if the camera will not be used for an extended period of

time. The batteries may leak and cause a fire, injury or soiling of the battery

compartment. If the batteries leak, clean and wipe the battery compartment

carefully and install new batteries. Wash your hands carefully if you touch the

battery fluid.

CONTENTS

INTRODUCTION................ 7

Overview ................................. 7

Package contents ................... 7

Common (Optional) Accessories

................................................ 7

GETTING TO KNOW

THE CAMERA ................... 8

Front view................................ 8

Rear view ................................ 9

Mode dial ................................ 10

LED indicators......................... 10

Status LCD .............................. 11

LCD monitor information ......... 12

GETTING STARTED ......... 13

Installing the batteries............. 13

Using the AC power adapter .. 13

Loading a SD memory card.... 14

Attaching the strap.................. 14

Choosing the language........... 15

Setting the date and time........ 15

Setting the image resolution

and quality .............................. 16

RECORD MODE................ 17

Taking pictures........................ 17

Using the viewfinder...................... 17

Using the LCD monitor.................. 18

Using the normal mode .......... 18

Using the digital zoom ............ 19

Using the self-timer ................. 20

Using the macro mode ........... 21

Using the flash ........................ 21

Taking pictures manually ........ 23

PLAYBACK MODE............ 24

Viewing images....................... 24

Zoom Playback ....................... 25

Displaying thumbnail images.. 26

Slideshow display ................... 26

Deleting images ...................... 27

MOVIE MODE.................... 28

Recording video clips ............. 28

Viewing video clips ................. 29

TRANSFERRING RECORDED

IMAGES TO YOUR

COMPUTER....................... 30

Step 1: Installing the USB driver

on Windows computers .......... 31

Installing the USB driver

on Macintosh computers ........ 31

Step 2: Connecting the camera

to your computer..................... 31

Step 3: Downloading images/video

clips......................................... 32

For computers running Windows .. 32

For computers running Mac OS.... 32

INSTALLING

MGI PHOTOSUITE ............ 33

INSTALLING

MGI PHOTOVISTA ............ 34

INSTALLING

ACROBAT READER ......... 35

USING THE USER’S

MANUAL............................ 36

MENU OPTIONS ............... 37

Record menu .......................... 37

LCD BRIGHTNESS ........................ 37

QUICK VIEW ................................. 37

DIGITAL ZOOM ............................. 37

WHITE BALANCE.......................... 37

EV COMPENSATION ..................... 38

SHARPNESS ................................. 38

EXIT ............................................... 38

Playback menu ....................... 39

LCD BRIGHTNESS ........................ 39

SLIDE SHOW................................. 39

COPY TO CARD............................ 39

DELETE ALL.................................. 39

DPOF ............................................. 40

EXIT ............................................... 40

Movie menu............................. 41

LCD BRIGHTNESS ........................ 41

EXIT ............................................... 41

Setup menu............................. 42

DATE/TIME .................................... 42

LANGUAGE................................... 42

SOUND.......................................... 42

FORMAT MEDIA ............................ 42

VIDEO MODE ................................ 43

AUTO POWER OFF ....................... 43

RESET TO DEFAULT ..................... 44

CONNECTING THE CAMERA

TO OTHER DEVICES........ 45

CAMERA SPECIFICATIONS

........................................... 46

INTRODUCTION

Overview

Your new digital camera delivers high quality, 1600x1200 resolution images using

a 2.1 Mega pixel CCD imager. Using either the optical viewfinder or the 1.6" TFT

color image LCD monitor, you can compose images and then examine them in

detail. An auto-flash sensor automatically detects the shooting (lighting) condi-

tions and determines whether the flash should be used. This feature helps ensure

that your images turn out right.

8MB internal (built-in) memory lets you capture and store images without the need

for an additional memory card. However, you may wish to expand the memory

capacity (up to 128MB capacity) by using an external memory card.

In addition to still images, you can record short videos using the movie function.

Images you have taken can be downloaded to your computer using the USB cable

(USB driver required for Win98 and Mac OS 8.6) You can enhance and retouch

your images on your computer by using the provided editing software, or image

editing software you may already own. You may share your images with your friends

via e-mail, in a report, or on a website.

DPOF functionality allows you to print your images on a DPOF compatible printer

by simply inserting the memory card.

Package contents

Carefully unpack your package and make sure that you have the following items.

Common Product Components:

 Digital camera  USB cable

 Video cable  Software CD-ROM

 User’s manual  Camera strap

Common (Optional) Accessories:

SD memory card

(up to 128MB capacity)

Camera pouch

AC power adapter

2 x AA alkaline batteries

GETTING TO KNOW THE CAMERA

Front view

1. Status LCD

2. Shutter button

3. Viewfinder window

4. Lens cover

5. Focus switch

6. Flash button

7. Quality/Resolution button

8. Flash

9. Lens

10. Strap eyelet

11. DC IN jack

12. USB connector

13. Self-timer lamp

2 4

Rear view

1. LED indicator

2. Viewfinder

3. LCD monitor

4. LCD button

5. Menu button

6. Power button

7. Mode dial

8. Battery/SD card cover

9. VIDEO OUT jack

10.Tripod socket

1. Arrow button (up)

2. Arrow button (left)

Self-timer button

3. OKOK button

Digital zoom button

4. Arrow button (right)

5. Arrow button (down)

Delete button

Ce manuel convient aux modèles suivants

Table des matières

Autres manuels Vivitar Appareil photo numérique

Vivitar

Vivitar Vivicam 40 Manuel utilisateur

Vivitar

Vivitar ViviCam 3730 Manuel utilisateur

Vivitar

Vivitar Vivicam 55 Instructions de montage

Vivitar

Vivitar VIVICAM X026 Manuel utilisateur

Vivitar

Vivitar ViviCam 8018v2 Manuel utilisateur

Vivitar

Vivitar Vivicam 25 Manuel utilisateur

Vivitar

Vivitar Vivicam 2200 Manuel utilisateur

Vivitar

Vivitar Vivicam 40 Manuel utilisateur

Vivitar

Vivitar VIVICAM 8690 Manuel utilisateur

Vivitar

Vivitar ViviCam T028 Manuel utilisateur

Vivitar

Vivitar Vivicam 3060 Manuel utilisateur

Vivitar

Vivitar ViviCam 3765 Manuel utilisateur

Vivitar

Vivitar Vivicam 2795 Manuel utilisateur

Vivitar

Vivitar ViviCam S029 Manuel utilisateur

Vivitar

Vivitar Freelance VS17G Manuel utilisateur

Vivitar

Vivitar ViviCam X024 Manuel utilisateur

Vivitar

Vivitar Vivicam 4100 Manuel utilisateur

Vivitar

Vivitar Vivicam 60 Manuel utilisateur

Vivitar

Vivitar Vivicam 3725 Manuel utilisateur

Vivitar

Vivitar VIVICAM 5118V2 Manuel utilisateur

Vivitar

Vivitar Vivicam 3746 Manuel utilisateur

Vivitar

Vivitar ViviCam X024v2 Manuel utilisateur

Vivitar

Vivitar MagnaCam 1025x1 Digital Camera/Binocular Guide de configuration

Vivitar

Vivitar Vivicam 3632 Manuel utilisateur

Manuels Appareil photo numérique populaires d'autres marques

Mercury

Mercury 350K Manuel utilisateur

Pentax

Pentax Optio LS 465 Manuel utilisateur

Sanyo

Sanyo VPC-S1085 Manuel utilisateur

GE SMART A1255 Manuel utilisateur

Point Grey

Point Grey Gazelle Manuel utilisateur

Nikon

Nikon COOLPIX A Manuel utilisateur

Pentax

Pentax P-5 Manuel utilisateur

BlazeVideo

BlazeVideo A280 Manuel utilisateur

Sony

Sony MCA-20 Manuel utilisateur

Sony

Sony Alpha DSLR-A290 Manuel utilisateur

ATIK Cameras

ATIK Cameras One Manuel utilisateur

CohuHD Costar

CohuHD Costar 3930 Series Manuel utilisateur

Leica

Leica M10-R Manuel utilisateur

FujiFilm

FujiFilm FinePix A700 Manuel utilisateur

Lorex

Lorex LNZ81P25 Series Manuel utilisateur

GE J1470S Manuel utilisateur

Sony

Sony A6700 Guide de l'utilisateur

Canon

Canon EOS ELAN7 Manuel utilisateur