VIVIBright DU8090Z Manuel utilisateur

DU8090Z

User's ManualUser's Manual

DU8090Z DLP Projector - User Manual

Table of Contents

Copyright ............................................................................................................................................................ 2

Copyright...................................................................................................................................................... 2

Disclaimer .................................................................................................................................................... 2

About the Manual ......................................................................................................................................... 2

Important Safety Guidelines ............................................................................................................................... 3

Safety Notification ........................................................................................................................................ 3

Installation and Use Notices......................................................................................................................... 5

Disposal of Old Electric and Electronic Equipment ...................................................................................... 5

Important Recycling Instructions .................................................................................................................. 5

Introduction......................................................................................................................................................... 6

Packing Checklist......................................................................................................................................... 6

Projector Overview....................................................................................................................................... 7

IO Panel ....................................................................................................................................................... 9

Control Panel ............................................................................................................................................. 10

Remote Control .......................................................................................................................................... 11

Installing or Removing the Optional Lens .................................................................................................. 12

Lens Shift Range........................................................................................................................................ 15

Making Connections ......................................................................................................................................... 17

Connecting to Personal Computer ............................................................................................................. 17

Connecting to the Video Device................................................................................................................. 17

Connecting to the Control Equipment ........................................................................................................ 18

Connecting to the Screen Trigger .............................................................................................................. 19

Connecting to external HDBaseT Transmitter............................................................................................ 20

Using the projector............................................................................................................................................ 21

Select the Input Voltage of AC Power ........................................................................................................ 21

Connecting to AC Power Supply ................................................................................................................ 21

Turning on the Projector............................................................................................................................. 21

Turning off the Projector............................................................................................................................. 22

Using On-Screen Display ................................................................................................................................. 23

Using the OSD Menu ................................................................................................................................. 23

Menu Tree .................................................................................................................................................. 24

OSD Operation – INPUT............................................................................................................................ 27

OSD MENU – PICTURE ............................................................................................................................ 30

OSG MENU – ALIGNMENT....................................................................................................................... 31

OSD MENU – CONTROL .......................................................................................................................... 34

OSD MENU – SERVICE ............................................................................................................................ 37

Product Specification ........................................................................................................................................ 38

Supported Signal Input Timing.......................................................................................................................... 39

Product Dimensions.......................................................................................................................................... 41

LED Indication .................................................................................................................................................. 42

About the VIVITEK Support .............................................................................................................................. 43

DU8090Z DLP Projector - User Manual

The User's Manual (including all pictures, illustrations and software) is protected by the international copyright right

law. All rights are reserved. No duplication of the manual or any content included in the manual is allowed without the

written consent of the manufacturer.

Disclaimer

The information in the manual is subject to change without notice. The manufacturer does not provide any statement

or warranty of the contents in the manual and clearly give up the implied warranties of merchantability and of fitness

for a particular purpose. The manufacturer reserves the rights to modify the publication and change the contents of

the materials at any time without notice to any person.

About the Manual

The manual describes how to install and use the DLP projector and is applicable to the end-user. Relevant

information (such as illustrations and descriptions) is put on the same page as possible as we can. The format, easy

for printing, is convenient for reading and paper-saving which is beneficial to environmental protection. It is

suggested printing the page you need.

DU8090Z DLP Projector - User Manual

Important Safety Guidelines

Thank you for purchasing the high quality product!

Read the Manual carefully to obtain the best performance. The Manual provides instructions to use the menu and

implement operation.

Safety Notification

To turn off main power, ensure to unplug from power outlet.

To prevent electric shock, do not open the cabinet. There are high-voltage components inside.

Refer service to qualified service personnel.

The symbol warns the user about electric shock caused by voltage not insulated. Therefore, it is dangerous

to make any kind of contact with any parts of inside units.

This symbol alerts the user that important information which should be read carefully to avoid problems

concerning the operation and maintenance.

WARNING!

To prevent the projector from electrical discharge or electric shock, do not expose the projector to rain or

moist environment. Do not use the plug with an extension cord or an outlet unless all the prongs can be

fully inserted.

WARNING TO CALIFORNIA RESIDENTS:

Handling the cables supplied with this equipment might expose user to a little lead, a chemical known to the Stage of

California, resulting in risks of barrenness. Please remember to wash hands after handling.

NOTIFICATION (CANADA)

This class A digital equipment complies with Canadian ICES-003.

CE NOTIFICATION

This is a class A product, which complies with rules for CE marking. This product may cause radio interference that

the user may be supposed to take adequate measures.

FCC NOTIFICATION

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This

device may not cause harmful interference; (2) this device must accept any interference received, including

interference that may cause undesired operation. This equipment has been tested and found to comply with part 15

of the FCC Rules. These requirements are designed to provide reasonable protection against harmful interference

when the equipment operates in a commercial environment. This equipment might generate radio frequency energy.

If user does not install or use in accordance with the instructions in manual, the radio frequency energy may interfere

radio reception. If the above scenario occurs, the user may be responsible to correcting the interference

WARNING!

Changes or modifications without approval from Vivitek could void the user’s authorization to

operate the product.

LIGHT MODULE

A light module containing multiple laser diodes acts as the light source in the product.

DU8090Z DLP Projector - User Manual

These laser diodes are sealed in the light module. It is recommended to ask dealer for maintenance or repair

services of the light module.

End user is not allowed to replace the light module.

Contact distributor who provides the qualified service for light module replacement and further information.

LASER SAFETY NOTIFICATION AND CAUTION

Do not stare at the lens while in use

CLASS 3R LASER PRODUCT

This Laser Product is designated as Class 3R during all procedures of operation.

LASER LIGHT - AVOID DIRECT EYE EXPOSURE.

Do not point laser or allow reflected laser light toward other people or reflective objects.

Direct or scattered light can be hazardous to eyes and skin.

There is a potential hazard of eye exposure to laser radiation if the included instructions are not followed.

Caution – use of controls, adjustments or performance of procedures other than those specified herein may result

in hazardous radiation exposure.

Laser Parameters:

Wavelength : Maximum laser energy

450nm - 460nm (Blue) : 0.376mJ

Mode of operation : Total internal power

Pulsed, due to frame rate : >100W

Pulse width : Apparent source size

0.74ms : >10mm, at lens stop

Pulse repetition rate : Divergence

24Hz : >100 mili Radian

Product Label

Manufacturer’s ID Label, Explanatory Label and Certification Statement Label

Hazard Warning Symbol and Aperture Label

DU8090Z DLP Projector - User Manual

Installation and Use Notices

1. Read and keep this manual properly.

2. Pay attention to all the noted warnings, and follow all the guidelines and descriptions in this manual.

3. Do not use the projector near water.

4. Do not install the equipment near the thermal sources, such as heaters, radiators, furnace, amplifiers, and any

other equipment that may generate heat.

5. Be careful while holding the equipment or moving the trolley with projector to prevent the equipment from

turning over.

6. Notice whether there is any parts with flaws after receiving the projector.

7. Please notice that the projector will not power on until the lens is fitted. The protection covering the lens should

be taken to install the lens.

8. Do not let any vent be obstructed.

9. Do not destroy the safety protection function of polarized or grounding plug of power cord. A polarized plug has

one wide and one narrow blade. The plug has two blades and one grounding blade. The wide blade or

grounding blade is provided for the safety concerns. If the plug provided does not match the outlet, please

contact the electrician to change outlet.

10. The +12V trigger only outputs 12V DC trigger signal. Do not connect other power input or output. Otherwise,

the equipment may malfunction.

11. Adjust the slide switch with suitable volt input, and then plug in the projector; the red LED indicator would flash

and then stabilize, getting into standby mode. User should only use the connectors or accessories provided by

the manufacturer.

12. When user turns on the projector, the red LED indicator would flash until stabilize. Do not look at the lens

directly while the projector is running.

13. Unplug the power cord of the equipment if there is a thunderstorm or the equipment is not going to be used for

a long time.

14. The packaging materials can be kept properly for transportation use afterwards.

15. If any breakdown occurs, please contact dealer or manufacture for qualified repair service.

Disposal of Old Electric and Electronic Equipment

The symbol on your product or the package represents that the product should not be treated as the normal

household waste when discarded but should be carried to the recycling location of the waste electric and electronic

equipment. The consequence on the environment and human health due to the incorrect disposal of the product can

be prevented if it can be ensured that the product is properly discarded. Material recycling is helpful to the protection

of natural resources. The symbol is only valid in European Union. If you want to discard electrical and electronic

equipment, contact the governmental authorities or your dealer for the correct method of disposal.

Important Recycling Instructions

The lamp of the product contains mercury. The product may contain other electronic wastes and may pose risk if not

discarded properly. Abide by the local, state/provincial or federal laws of recycling or discarding. For more

information, please visit the website and contact Electronic Industries Alliance (EIA) on WWW.EIAE.ORG.

Please visit WWW.LAMPRECYCLE.ORG for the specific disposal information of lamps.

DU8090Z DLP Projector - User Manual

Introduction

The User's Manual describes the installation, setup and operation of the DU8090Z projector and provides assistance

to the installation personnel and the end-user to fully develop the performance of the projector. VIVITEK has made

every effort to ensure that the information in the Manual is correct at the time of printing. The contents may be

frequently updated due to the continuously product improvement and customer feedback.

You can find the latest version of the Manual and the manual of other Vivitek products on www.vivitekcorp.com.

Packing Checklist

The following items are included in the packaging box of the DU8090Z series projector. If any loss or damage to any

item, contact your dealer or the VIVITEK customer service department.



  ACPowerCordPowerCord    VGASignalCable





IRRemoteControl    CableoftheWired   Anti‐thiefScrewfor

RemoteControl   LensInstallation

(M4)



User’sManualDisc    RoHSCard(China)   Qualification

Certificate(China)

DU8090Z DLP Projector - User Manual

Projector Overview

Front-right View

1. Front IR Receiver

The Receiver for IR signals from remote control.

2. LED Indicator

Display current projector status such as power, light source status

and warning.

3. Air Intake

The fan pulls the cool air to the projector for system cooling.

4. Lens Release Button

Press the Lens Change button before removing the lens.

5. Lens hood

Remove the cover before installing the lens.

6. Height Adjuster

Adjust level of projector

7. Intake Vent

The fans pull air to cool the radiator of the projector.

8. Rear IR Receiver

The Receiver for IR signals from remote control.

Rear-right View

9. I/O Connector Panel

Connect to various input, control or output terminals to the

projector.

10. Kensington Lock

Attach the projector to a permanent object with the Kensington

slot and a security cable.

11. Slide Switch

12. AC Power Switch

Turn on/off the AC power of the projector.

13. AC Inlet

Connect the supplied power cable to this inlet.

14. Control Panel

Press the button to operate the OSD menu or adjust the lens

Settings see OSD controls.

1 2

3 4

10 11

Important:

Grill openings on the projector allow for good air circulation, which keeps the projector lamp cool. Do not obstruct

any of the grill openings

DU8090Z DLP Projector - User Manual

Bottom View

15. Anti-thief Screw hole

The anti-thief screw can be fastened to prevent

Lens removing by unauthorized person.

16. Mounting Holes of Support Kit

These two screws holes can be used to fix

support kits of ultra-short throw lens.

Note: The screws are for Lens support kits only;

overloading may damage the projector or cause

injury.

17. Recess for projector handling.

These four recesses can be used for handling

the projector.

18. Ceiling Mounting Hole

Total, 6 holes for M4 screw, maximum depth

14mm.

19. Security Slot

The slot can be used for Short-term protection

15 16

Note:

When installing, ensure that you use only UL Listed ceiling mounts, Contact your dealer for information on

mounting the projector on a ceiling.

With ceiling installation, use approved mounting hardware & M4 screws; maximum depth of screw: 18 mm.

DU8090Z DLP Projector - User Manual

IO Panel

TRIGGER(12V +/-1.5V)

When connected to the screen thtough a 3.5mm cable,

the screen deploys automatically on start up of the

projector. The screen reacts when the projector is

powered off.

RS-232

The 9-pin D-sub interface is used to connect to the PC

control system and projector maintenance.

Component (V, H, B/Pb, G/Y, R/Pr)

Connect RGBHV or Component signal from computer or

component video enabled device

VGA

Provide the standard 15-pin VGA connection and can

connect to RGB, HD Component or personal computer.

MONITOR OUT

Connect to a monitor to display the projected content.

WIRED REMOTE

Connect the supplied remote controller to the projector

HDBaseT/LAN

Connect an Ethernet cable (Cat5/Cat6, not supplied) from

a computer, network device, or HDBaseT transmitter.

HDMI I

Connect the HDMI cable from a computer or video device

DVI-D

Connect to DVI-D cable from a DVI-D output of the

device.

SDI IN/OUT

Connect to SDI source.

HDMI II

Connect the HDMI cable from a computer or video device

3D SYNC IN / Out

Connect to the 3D IR synchronization signal transmitter.

Note for Wired Remote

Please make sure whether the port for insertion is correct before the terminal of the wired remote control is

inserted. The remote control may be damaged if inserted to the wrong port such as trigger. Do not use this jack for

anything other than intended use.

Note for Trigger

When the projector is turned on, a control signal (DC 12V) outputs from this terminal, Screen controllers are

supplied and supported by screen manufacturers.

Do not use this jack for anything other than intended use.

Table des matières

Autres manuels VIVIBright Projecteur

VIVIBright

VIVIBright PLED-V200 Manuel utilisateur

VIVIBright

VIVIBright PLF1080ST Manuel utilisateur

VIVIBright

VIVIBright PLWU8100F Manuel du propriétaire

VIVIBright

VIVIBright PLX8100F Manuel utilisateur

VIVIBright

VIVIBright PLED-S200 Manuel utilisateur

VIVIBright

VIVIBright PLW8100F Manuel utilisateur

VIVIBright

VIVIBright PLF1080F Manuel utilisateur

VIVIBright

VIVIBright PLX8000HD Manuel utilisateur

VIVIBright

VIVIBright PLWU8100F Manuel utilisateur

Manuels Projecteur populaires d'autres marques

iEmmet

iEmmet MP-312 Manuel utilisateur

Epson

Epson VS400 Manuel utilisateur

Sony

Sony VPL-HS10 Marketing Specifications & Features Manuel utilisateur

Sony

Sony VPL-HW65ES Manuel de service

Toshiba

Toshiba TLP-791U Manuel utilisateur

Philips

Philips LC1341 Guide de référence

Panasonic

Panasonic PTL735NTU - LCD PROJECTOR-NETWORK IB Manuel utilisateur

NEC

NEC NP600S EDU Manuel utilisateur

BenQ

BenQ SH753P Manuel utilisateur

Eiki

Eiki EK-623U series Manuel utilisateur

Epson

Epson PowerLite Pro Cinema 6020UB Manuel utilisateur

Epson

Epson PowerLite Home Cinema 705HD Manuel utilisateur

Christie

Christie LHD700 Manuel utilisateur

Navitar

Navitar FX Manuel utilisateur

InFocus

InFocus LitePro 560 Manuel utilisateur

Sony

Sony SRX-R815P Manuel utilisateur

Vivitar

Vivitar DP1500 X Manuel utilisateur

Acer

Acer C20 Series Manuel utilisateur