1. For charging the E-bike, simply take the E-bike and bring near to the power
supply that is available. Connect the charging plug to the charging base and
then plug in the power plug of the charger to charger.
2.The battery can either be charged while on the bike or the battery can be
removed and charged at a place of your convenience.
3 .The RED light indicates it is in charging and GREEN light indicates the
battery is fully charged. (Please unplug from the wall) Normally the charging
time is 4-6 hours, depending on the battery capacity.
4. Warning: Charging time over 10 hours is prohibited please kept it away
from high temperature environment and stores it in a environmental
temperature.
6 . Installation Instruction
1. Take out the E-bike from the carton and cut the wrapping rope with a tool.
2. Handlebar installation:
2.1 Insert the seat tube vertically and align it with the frame head tube. The
depth must exceed the minimum insertion depth marked on the seat tube.
2.2 Align the standpipe so that the handlebar and the frame are at 90
degrees, and then use an M6 hexagon wrench to tighten the mounting screws
on the standpipe.
2.3 Adjust the correct position of the handlebar, and then use tools to lock the
handlebar cover
2.1 2.2 2.3
3. Headlight installation
