vivaldigroup.it 9
3) Bluetooth Pairing
Make sure the device is on by checking the status LED. Select the Bluetooth source in the APP or press the “MODE” button in
the remote control until the status LED turns blue. Now select from your source device (e.g. Smartphone,
tablet, laptop, etc. ) vivaldi_keyround_xxxx and perform pairing, when prompted to pin enter “2022”. Once
that the pairing is successful, you will be able to use the functionality.
Notes:
• Bluetooth functionality can only be used from 1 device at a time.
• If a pin is required for the queue enter “2022”.
• If the queue fails the rst time, restart the device and follow the instructions again. If the problem persists, press the reset
button and reset the device.
• If you are unable to connect to the previously used device, remove “Keyround” from the device list
and make the queue again.
• Bluetooth functionality does not exceed 10mt of unobstructed distance
4) RCA Connecting
1. Connect to the speaker using a dual RCA left/right cable.
2. Use the mode button on the remote or Vivaldi APP to choose RCA mode.
(PLAYER or Bluetooth Input has the priority when 3 audio inputs are connected simultaneously.)
3. The RCA mode will be activated when the indicator light shows cyan.
5) Create Stereo Pair
1. Connect the passive speaker to the 2 way connector output.
2. Slide the mono-stereo switch to the stereo position
6) Switch 3 Audio Sources
• PLAYER Mode
After connecting with the network, use Vivaldi App to play audio and the speaker will automatically work in PLAYER mode.
Or press “MODE” button of the remote for several times until the LED light turns green to switch audio source to “PLAYER”.
The Webradio, Airplay, Spotify and other function will be active automatically in this mode.
• Bluetooth Mode
Press the “MODE” button of the remote several times until the LED light turns blue or use Vivaldi App to switch
the audio source to “Bluetooth”.
• RCA Mode
Connect the speaker with an audio device like a phone or a computer by RCA cable, and press the “MODE” button on
the remote several times until the LED light turns cyan, or use Vivaldi App to switch the audio source to
“AUX in” to switch to RCA mode.
english
