VistaQuest VQ 350 Manuel utilisateur

User’s Manual

Contents

1.0 Introduction ----------------------------------------------------------------------------------------------

1.1 Overview ---------------------------------------------------------------------------------------------------

1.2 Warnings and Precautions -------------------------------------------------------------------------

1.3 Package Contents --------------------------------------------------------------------------------------

1.4 System Requirements---------------------------------------------------------------------------------

1.5 Camera Features ---------------------------------------------------------------------------------------

2.0 Installing the Batteries --------------------------------------------------------------------------------

3.0 Capturing Images --------------------------------------------------------------------------------------

3.1 Power-On the Camera---------------------------------------------------------------------------------

3.2 Capture an Image --------------------------------------------------------------------------------------

3.3 Camera Status Icons-----------------------------------------------------------------------------------

3.4 Power-Off the Camera---------------------------------------------------------------------------------

3.5 Flash Charging-------------------------------------------------------------------------------------------

3.6 Self-Time ---------------------------------------------------------------------------------------------------

3.7 AVI Capture -----------------------------------------------------------------------------------------------

3.8 Continuous Capture -----------------------------------------------------------------------------------

3.9 Deleting Images -----------------------------------------------------------------------------------------

3.10

ImageResolution-----------------------------------------------------------------------------------------

Contents

3.11

High/Low Image Compression --------------------------------------------------------------------

3.12

Lighting Frequency------------------------------------------------------------------------------------

3.13

Using the Flash: Automatic or On/Fill --------------------------------------------------------

3.14

Techniques for Capturing the Best Images --------------------------------------------------

4.0 Installing Camera Drive and Software ----------------------------------------------------------

4.1 Uninstalling Software and Camera Driver ----------------------------------------------------

5.0 Download Images to your Computer -----------------------------------------------------------

5.1 Transfer Images to your PC ------------------------------------------------------------------------

5.2 Transferring your Images to PhotoImpression 5 ------------------------------------------

5.3 ArcSoft PhotoImpression 5 -------------------------------------------------------------------------

5.4 ArcSoft VideoImpression 2 -------------------------------------------------------------------------

5.5 Checking the Connection of Your Camera ---------------------------------------------------

6.0 PC/Web Camera Video Function -----------------------------------------------------------------

6.1 Using the Camera in Video Mode ----------------------------------------------------------------

6.2 Using the Camera with PC Cam -------------------------------------------------------------

6.3 Using the Camera with NetMeeting -------------------------------------------------------------

6.4 Using the VistaQuest digital camera with Movie Maker on Windows XP --------

7.0 Specifications --------------------------------------------------------------------------------------------

020606

WARNING



When the battery icon is blinking,

download the pictures to your computer, immediately, and

change the batteries; otherwise,

your images will be lost.



-1-

1.0 Introduction

1.1 Overview

Thank you for purchasing a VistaQuest digital camera. It can capture digital images, short

video-clips (continuous shooting mode), and it can also serve as a PC/Web camera. The camera is

equipped with 8 MB of memory to store your images and movie clips. You may download your

images and movie clips to your computer using the USB cable and included software.

1.2 Warnings and Precautions

1.2.1 FCC STATEMENT

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two

conditions:

1. This device may not cause harmful interference, and

2. This device must accept any interference received, including interference that may

cause undesired operation.

Note: This equipment has been tested and found to comply with the limits for Class B digital

devices, pursuant to Part 15 of the FCC rules. These limits are designed to provide reasonable

protection againstharmfulinterference ina residentialinstallation.Thisequipmentgenerates,uses

and can radiate radio frequency energy and, if not installed and used in accordance with the

instructions, may cause harmful interference to radio communications. However, there is no

guarantee that interference will not occur in a particular installation. If this equipment doescause

harmful interference to radio or television reception, which can be determined by turning the

equipment off and on, the user is encouraged to try to correct the interference byone or more of the

following measures:

-2-

1. Reorient or relocate the receiving antenna

2. Increase the separation between the equipment and receiver

3. Connect the equipmentinto anoutletonacircuitdifferentfromthattowhichthereceiver

is connected

4. Consult the dealer or an experienced radio/TV technician for help

Use of shielded cable is required to comply with ClassB limits in Subpart B of Part 15 of the FCC

rules. Do not make any changes or modifications tothe equipment unless otherwise specified in

the manual. If such changes or modifications should be made, you could be required to stop

operation of the equipment.

1.2.2 GENERAL WARNINGS

Do not use batteries other than those specified for use with the camera. The use of unsuitable

batteries may result in the batteries splitting or leaking and causing a fire, injury, or soiling of the

battery compartment.

When placing batteries in the camera, checkthepolarityofthebatteries(-and+)toensureproper

orientation. Incorrect polaritymayresult in the batteriessplitting or leaking and causing afire, injury,

or soiling of the battery compartment.

Remove the batteries if the camera will not be used for an extended period of time.The batteries

mayleak and cause a fire, injury or soiling of the battery compartment. If the batteries leakclean

and wipe the batterycompartment carefullyand install newbatteries.Washyourhandscarefullyif

you touch the batteryfluid. Pleasenotethat whenyou remove the batteries yourimages will belost

from the camera memory.

WARNING: Handling the USB cable on thisproduct mayexposeyou tolead,a chemicalknown to

the State of California to cause birth defects or other reproductive harm. Wash your hands after

handling.

-3-

1.2.3 TRADEMARK INFORMATION

Microsoft® and Windows® are U.S. registered trademarks of Microsoft Corporation.

Pentium® is a registered trademark of Intel Corporation. Other names and products may be

trademarks or registered trademarks of their respective owner.

1.3 Package Contents

The package typically includes:

1. Camera

2. USB Cable

3. CD ROM with Driver and Application Software

4. User Manual

5. Three (3) AAA batteries

6. Hand Strap

Note: Included components may vary, as specified by local retailers and locations.

Consult with your retailer for specifics.

1.4 System Requirements

You must use a computer to download the images from your camera. The computer used

must meet the following minimum requirements:

1. Windows SE 98 /ME/2000/XP

2. Direct X 8.0 or higher

3. 128 MB RAM

4. 60 MB hard disk space available

5. Available USB Port

6. CD-ROM Drive

-4-

1.5 Camera Features

1. Shutter Button

2. Flash

3. Viewfinder

4. Lens

5. USB Port

6. Strap Eyelet

7. Indicator Lamp

8. LCD

9. MODE

10. ON/OFF

11. Battery Compartment Cover

12. Tripod Socket

-5-

2.0 Installing the Batteries

Step 1: Open the battery door by lifting the tab on the door.

Step 2: Insert three AAA batteries with the polarity as shown.

Step 3: Close the battery cover.

Warning: Do not open the battery door when the camera is powered ON. This will cause

all images in memory to be lost immediately. If you open the batterydoor when the camera

is OFF (when changing the batteries) you must close the door within thirty(30) seconds or

your images will be erased from memory.

Notes:

1. Always download your images to your computer soon after you have captured them.

Never assume your images will be retained for more than three or four days. If the

batteries are depleted, your images will be lost.

2. If you must change the batteries, makes sure the camera is OFF and then change the

batteries in less than thirty (30) seconds.

3. If you will not use the camera for a long time (several days, or more) remove the

batteries. The batteries will discharge slowly if left in the camera. This may cause

complete battery discharge as well as loss of images. The batteries may corrode if left in

the camera for extended periods of time.

4. Dispose of batteries properly in accordance with local laws and regulations. Do not place

them in fire.

5. The VQ 350 has an automatic power-saving feature. The camera will turn off

automatically if it has not been used after approximately thirty (30) seconds.

6. When the camera is connected to a computer using a USB cable, it is not necessary to

use batteries because the camera uses the power provided by the computer through

the USB interface.

-6-

3.0 Capturing Images

Using your new camera is fun and easy.

There are two basic steps to capturing

your first image.

Step 1: Turn on the camera by holding down

the Power Button for two seconds.

Step 2: Press the Shutter Button to capture an image.

It is really that easy!The following sections will tell you about more features availableon your camera.

3.1 Power-On the Camera

To power-on the camera hold down the Power ON/OFF button for two seconds as shown

above. The camera will beep once, indicating that it is ready. The Status LCD display will turn as

Illustrated in the picture at the right.

In this example the camera is ready to capture an image in High

Resolution Mode. (Function icons are explained in Section 3.3.)

Note that the camera will automatically power-off after 30 seconds of inactivity

to save battery power. To turn the camera on again, press the Power button.

Autres manuels pour VQ 350

Table des matières

Autres manuels VistaQuest Appareil photo numérique

VistaQuest

VistaQuest VQ-7228 Manuel utilisateur

VistaQuest

VistaQuest VQ-7024 Manuel utilisateur

VistaQuest

VistaQuest VQ 5020 Manuel utilisateur

VistaQuest

VistaQuest VQ 350 Manuel utilisateur

VistaQuest

VistaQuest VQ1000 Manuel utilisateur

VistaQuest

VistaQuest VQ 5020 Manuel utilisateur

VistaQuest

VistaQuest VQ-2000 Manuel utilisateur

VistaQuest

VistaQuest VQ 5010 Manuel utilisateur

VistaQuest

VistaQuest VQ-3005 Manuel utilisateur

VistaQuest

VistaQuest VQ-7015 Manuel utilisateur

VistaQuest

VistaQuest VQ-5015 Manuel utilisateur

VistaQuest

VistaQuest VQ300B/P Manuel utilisateur

VistaQuest

VistaQuest VQ-3110 Manuel utilisateur

VistaQuest

VistaQuest VQ-3007 Manuel utilisateur

VistaQuest

VistaQuest VQ310 Manuel utilisateur

VistaQuest

VistaQuest VQ1100 Manuel utilisateur

VistaQuest

VistaQuest VQ1100 Manuel utilisateur

VistaQuest

VistaQuest VQ1000 Manuel utilisateur

VistaQuest

VistaQuest VQ1030Ts Manuel utilisateur

VistaQuest

VistaQuest VQ6100 Manuel utilisateur

VistaQuest

VistaQuest VQ-7228 Manuel utilisateur

VistaQuest

VistaQuest VQ-5015 Manuel utilisateur

VistaQuest

VistaQuest VQ-3110 Manuel utilisateur

VistaQuest

VistaQuest VQ-2000 Manuel utilisateur

Manuels Appareil photo numérique populaires d'autres marques

Mercury

Mercury 350K Manuel utilisateur

Pentax

Pentax Optio LS 465 Manuel utilisateur

Sanyo

Sanyo VPC-S1085 Manuel utilisateur

GE SMART A1255 Manuel utilisateur

Point Grey

Point Grey Gazelle Manuel utilisateur

Nikon

Nikon COOLPIX A Manuel utilisateur

Pentax

Pentax P-5 Manuel utilisateur

BlazeVideo

BlazeVideo A280 Manuel utilisateur

Sony

Sony MCA-20 Manuel utilisateur

Sony

Sony Alpha DSLR-A290 Manuel utilisateur

ATIK Cameras

ATIK Cameras One Manuel utilisateur

CohuHD Costar

CohuHD Costar 3930 Series Manuel utilisateur

Leica

Leica M10-R Manuel utilisateur

FujiFilm

FujiFilm FinePix A700 Manuel utilisateur

Lorex

Lorex LNZ81P25 Series Manuel utilisateur

GE J1470S Manuel utilisateur

Sony

Sony A6700 Guide de l'utilisateur

Canon

Canon EOS ELAN7 Manuel utilisateur