Vista TCS Manuel utilisateur

AQUICK START

1. Locate and mount TCS controller within 100’ of your WiFi network access point.

2. Plug TCS controller into 120V service outlet (no fixtures connected).

3. Connect low voltage fixtures to three TCS output zones up to 150W total.

4. Connect any LED RGBW Smart Lamps to Smart Zone terminals.

5. Locate circuit protector inside TCS wiring compartment. Ensure it is

switched ON (pulled towards you).

6. Locate TCS Function Selector switch - push to “ALL ON”

7. Ensure all field fixtures are on, then push switch to “APP” position.

8. Download VISTA CLOUD app to your device and follow on screen instructions.

B TCS AND TRANSFORMER CONNECTION DETAIL

1. Confirm TCS is connected to 120V source, the source is energized, and its

output circuit breaker is on.

2. Ensure TCS front panel green input power LED is on.

4. With low voltage fixtures disconnected, test TCS output by switching

“Function Control” rocker switch to ON. All three TCS green output LED’s

should be on and connected lamps should be on.

5. TCS front panel WiFi LED should be solid green indicating proper

connection to your local WiFi network. Unit will not function without a

strong network connection.

6. Lamps pulsating slowly? Your TCS may be overloaded. In the app, check

above the Zone group for an OVERLOAD indicator in RED. On the TCS

front panel, an amber input power LED will also appear. If either indicator

disappears after setting each Zone to HI or below, reduce load by

removing lamps or reducing their individual wattage.

7. Return switch to APP position for WiFi connected control and operation.

INSTALLATION INSTRUCTIONS

TCS

1625 Surveyor Avenue • Simi Valley, CA 93063 • (805) 527-0987 • (800) 766-Vista (8478) • FAX: (888) 670-Vista (8478) • [email protected] • www.Vistapro.com

Lighting Control System

CCREATING AN ACCOUNT

1. Using your smartphone or pad device, search and

download the free VISTA CLOUD app.

2. First time users must register - follow the steps to

3. After establishing a username and password, sign in.

DADDING A TCS CONTROLLER TO YOUR ACCOUNT

In the VISTA CLOUD app screen, tap add controller. Add controller and

help link also found in the menu at the top right of the screen. In order to

add an TCS to your account, find it’s unique QR code label (on it’s packaging

and inside the product wiring compartment) and scan using your device as

directed. If unable to scan, it’s 10 character ID may be typed directly from the

QR label into the app.

ETCS NETWORKING

1. With power on, front panel input power LED will illuminate. Ensure

provided “ON/OFF/APP” rocker switch is in the “app” position.

2. For new installations “WiFi” LED indicator (front panel center) will blink red

slowly. Continue with the following:

Method one (auto):

1. Tap “add controller” within the app and follow the on-screen instructions.

Method two (in rare cases, manual connection below may be required):

1. Find button marked “WiFi connect switch”. Using pen or similar blunt

object, press in and hold for a full 5 seconds. Watch “WiFi status” LED

change from rapid blinking to solid red.

2. Using your device, navigate to your WiFi network screen in settings. A

device screen pull down (refresh) may be required to bring product

network to the list. Find and connect to the network labeled “LCS”.

3. A network portal screen will appear with three choices – ‘configuration’,

‘information’ or ‘exit portal’. If this screen does not appear, type “WiFi.

Urremote.Com” in your device browser address line while connected to

LCS.

4. Tap ‘configuration’, then tap your local WiFi network name from the list

(should be near the top and have the strongest signal).

5. Enter your SSID and WiFi password (make sure all upper and lower-case

letters and symbols are correct), then tap save.

6. Within 10 seconds, your TCS will reboot, causing the “WiFi” LED to turn

off, then become solid green. Your TCS is now connected to WiFi!

WiFi

Router

100’ max.

ZONE 1 ZONE 3ZONE 2

TCS

SMART ZONE

FNETWORKING NOTES

• To ensure a strong network signal, install a WiFi extender/booster if required.

• Connect only to 2.4GHz WiFi network. Controller will not work with 5Ghz network.

• In the event of power loss, re-connection to designated WiFi is automatic

once power is restored, indicated by a red “WiFi status” LED, which will

turn solid green when connected.

• If WiFi signal only is lost, controller will continue with programed settings

indefinitely.

• Networking steps will need to be repeated if your WiFi password or SSID

has changed.

• For set-up and operating convenience, any controller may be scanned and

added to a new account/device.

• Only one account may add/control a given controller.

• To remove any controller from your account, simply tap the settings icon

below any zone and select remove controller.

• After successful activation, the three zones of your new TCS should appear

by pulling down (refreshing) or scrolling your app screen. An unlimited

number of controllers may be added to your account screen.

GTCS IOS/ANDROID VISTA CLOUD APP FUNCTIONS

1. Download the VISTA CLOUD app and create your personal account.

2. Once a controller is added to your account and networked, allow the

group of three Zones to load. Each group represents one 3 Zone TCS

controller with unique serial number.

3. Once a controller is added to your account and networked, you will see a

list of Zones in groups of three. Each group represents one TCS controller.

4. If properly connected to Wi-Fi, signal strength bars will appear to the right

of each controller name: Green = good signal, Yellow = fair signal,

Red = poor signal

5. In most cases, action will be need to be

taken to improve signal when Red bars

are present. Any Red cloud indicates no

Wi-Fi connection.

6. Below the photo of any Zone, an on/off

switch and settings icon is available which

includes Zone location photo, Controller

and Zone naming options, brightness

level controls and controller geo-location.

7. Tap ‘All On’ at the bottom of the app

screen. All Zones and connected fixtures

will ramp to previously saved brightness

levels (default is MAX BRIGHTNESS).

8. Choose a Zone photo and tap it. A

scheduling screen will appear. Each Zone

on, off and brightness levels may be

programmed on a ‘time-of-day’ dial for

each or all nights of the week.

TCS IOS/ANDROID VISTA CLOUD APP FUNCTIONS Cont.

• From scheduling screen, tap Add a Schedule.

• Tap and Drag ON lamp icon to desired ON time. Time set is displayed on

left. ON brightness level may be set within this box.

• Tap and drag OFF icon to desired OFF time. Time set is displayed on right.

• Tap “+” between ON/OFF displays. Drag DIM lamp icon to desired DIM

time. DIM level may be set within this box. Tap Save and run your schedule.

• Tap “x” in ON or DIM box to delete that schedule.

9. Back on main screen, tap Settings icon under any Zone.

• Zone Name - Change the name of each Zone as desired.

• Controller Name - Change the name of each of TCS on the property.

• Photo - Tap to add your own Zone photo.

• Brightness Levels - step control is provided, allowing fine adjustment of

LOW, MED, HI brightness selections. Once set to the desired brightness,

all levels may be saved, allowing ultimate control of Zone scheduling.

H TROUBLESHOOTING

1. Follow all steps in sections Aand Bbefore proceeding.

2. For device control, ensure 3-position rocker switch is in the APP position.

3. Once the APP is loaded, if scanned controller(s) (Zone Groups) do not

appear, refresh your device screen by slowly sweeping down from the top.

4. If WiFi LED is not solid green, hold WiFi connect switch for 5 seconds until

it turns solid RED, then repeat networking steps. Network connection status

is also displayed on the app main Zone screen. If a red cloud with diagonal

line appears below any Zone, refresh screen and /or repeat networking

steps. Still not connected? Perform “forget network” or switch in and out of

“airplane mode” on your device to bring “LCS” to the access point list.

5. Test your local WiFi networking signal strength by connecting your device

to WiFi (disable cellular network), then successfully loading any web page

while standing near the antenna of your TCS. Install WiFi booster/extender

if required.

6. Try the app and/or networking with a different smartphone/tablet. If you

are having issues with Android, try an iOS device, and visa-versa. Isolate

issues by changing the connecting device.

7. Make sure your VISTA CLOUD app and device operating system software

is the latest version from the App Store/Google Play Store. When in

doubt, you can always delete and reinstall the app on your device.

Go to SETTINGS, App Stores and always enable “Updates” under the

AUTOMATIC DOWNLOADS section.

8. Using the circuit protector switch inside the TCS wiring compartment, try

switching it off, waiting a few moments, then switching it back on again.

9. Power your smartphone/tablet completely off and back on again (reboot).

10. Try Remove Controller after selecting the settings icon ‘gear’ under any

Zone photo within a controller group screen. Re-scan QR code to add,

then refresh device screen for each controller.

1625 Surveyor Avenue • Simi Valley, CA 93063 • (805) 527-0987 • (800) 766-Vista (8478) • FAX: (888) 670-Vista (8478) • [email protected] • www.Vistapro.com

INSTALLATION INSTRUCTIONS

TCS

Lighting Control System

Vista Cloud Scheduling Screen

LT2065 2/20

Autres manuels Vista Système de contrôle