Viso Systems LightSpion Manuel utilisateur
LightSpion
Patent pending
User guide
Last edited: 2013-03-27
© 2007 Viso Systems ApS, Denmark
All rights reserved. No part of this manual may be reproduced, in any form or by any means,
without permission in writing from Viso Systems ApS, Denmark.
Information subject to change without notice. Viso Systems ApS and all affiliated companies
disclaim liability for any injury, damage, direct or indirect loss, consequential or economic loss
or any other loss occasioned by the use of, inability to use or reliance on the information
contained in this manual.
Dimensions
3 LightSpion user guide
Contents
Introduction........................................................................ 6
About the LightSpion......................................................6
Package contents........................................................... 6
About this document.......................................................7
Installation ......................................................................... 8
Software installation.......................................................8
Connecting power ..........................................................9
Connecting USB........................................................... 10
Making measurements..................................................... 11
Alignment of light source.............................................. 11
Quality selection........................................................... 12
Full automatic............................................................... 13
Manual power control................................................... 15
Manual integration time setup....................................... 16
Free running spectrometer........................................... 17
Measurement data........................................................... 18
Power details................................................................ 21
CRI details.................................................................... 23
Attaching pictures......................................................... 25
Saving measurement ................................................... 26
Exporting to IES/LDT.................................................... 27
Exporting to PNG ......................................................... 28
4 LightSpion user guide
Exporting to CSV.......................................................... 29
Emailing measurement................................................. 30
Advanced setup............................................................... 31
Custom calibration........................................................ 31
Accuracy.......................................................................... 34
Photo spectrometer accuracy....................................... 34
Optical sensor accuracy............................................... 35
Circular field accuracy.................................................. 37
Lumen accuracy........................................................... 39
Specifications................................................................... 41
5 LightSpion user guide
Safety Information
Warning! This product is not for household use.
Read this manual before installing and operating the
controller, follow the safety precautions listed below, and
observe all warnings in this manual.
Preventing electric shocks
Always ground (earth) the power supply.
Use only a source of AC power that complies
with local building and electrical codes, and that
has both overload and ground-fault protection.
If the controller or power supply are in any way damaged,
defective, wet, or show signs of overheating, disconnect the
power supply from AC power and contact Viso Service for
assistance.
Do not install or use the device outdoors. Do not spray with
or immerse in water or any other liquid.
Do not remove any covers or attempt to repair the controller
or power supply. Refer any service to Viso.
Disposing of this product
Viso products are supplied in compliance with Directive
2002/96/EC of the European Parliament and of the Council of
the European Union on WEEE (Waste Electrical and
Electronic Equipment), as amended by Directive 2003/108/EC,
where applicable.
Help preserve the environment! Ensure that this product is
recycled at the end of its life. Your supplier can give details of
local arrangements for the disposal of Viso products.
6 LightSpion user guide
Introduction
About the LightSpion
The LightSpion is a revolutionary new portable lighting
measurement device making it possible for the first time to
measure all aspects of a light source within a few seconds.
Package contents
The LightSpion package contains the following items.
LightSpion portable measurement system
Light Inspector software CD-ROM
Viso calibration certification document
E27 goniometer base light holder
Light source alignment tool
E14, B22, GU10 from E27 socket converters
2 m IEC power cord
2 m USB cable
7 LightSpion user guide
About this document
This guide describes how to install and use the LightSpion
controller, and how to make measurement of different light
sources.
8 LightSpion user guide
Installation
Software installation
Before you can start using the LightSpion, the “Viso Light
Inspector”software must be installed. Supported on all
windows platforms.
Use the following link to download the latest version:
http://www.lightdataserver.com/software/Viso%20Systems/Viso
%20Light%20Inspector.msi
Please make sure the LightSpion is not connected to the
computer during software installation.
Run the msi file and follow the
installation instruction.
USB drivers are automatically
installed.
Your measurements are not
lost, when installing newer versions or uninstalling. All
measurements always remain in your document folder.
9 LightSpion user guide
Connecting power
The LightSpion comes with a standard IEC power in
connector and with standard euro power cable, but any
power cable can be used as the LightSpion support any
outlet voltage from 90-260VAC.
The power in connector supplies
power to the goniometer motor
and to the power analyser and
subsequent to the light source to
be measured, meaning that
power supplied will be identical to
power supplied to the light source
to be measured.
AC power supply cable plug
Warning: Risk of electric shock! Plug
installation shall be performed by a qualified
electrician.
A grounding-type (earthed) power plug that fits the local
power outlet must be used which you can acquire an IEC
power cable with a suitable grounding-type plug from most
consumer electronics stores.
When installing the plug connect pins as follows:
yellow and green wire to ground (earth)
blue wire to neutral
brown wire to live
10 LightSpion user guide
Connecting USB
The LightSpion is connected to the computer using a USB
connector type B. A 2m USB cable type A to B is included
with the LightSpion but any USB cable supporting USB2.0
can be used.
The USB supplies
communication and power to the
LightSpion’s main board
processor, power analyser and
photo spectrometer, meaning
that the photo spectrometer can
be used only with USB
connected.
After connecting USB start the “Viso Light Inspector”
software and connection to the LightSpion will automatically
be established. A successful
connection is shown with a green
“Connected” icon in the upper
right corner of the “Viso Light
Inspector” software.
USB can be connected and disconnected without the need
of restarting the “Viso Light Inspector” software, as
connection always is established automatically as soon as
the USB connector is plugged in and vice versa.
Autres manuels pour LightSpion
1
Table des matières
Autres manuels Viso Systems Instrument de mesure
Viso Systems
Viso Systems LightSpion LIGSP001 Manuel utilisateur
Viso Systems
Viso Systems LabSpion Manuel utilisateur
Viso Systems
Viso Systems BaseSpion Manuel utilisateur
Viso Systems
Viso Systems LabSpion Manuel utilisateur
Viso Systems
Viso Systems LabSpion Manuel utilisateur
Viso Systems
Viso Systems VISO SYSTEMS Labarazzi Manuel utilisateur
Viso Systems
Viso Systems LabFlicker Manuel utilisateur
Manuels Instrument de mesure populaires d'autres marques
Endress+Hauser
Endress+Hauser Proline Promag 50 Caractéristiques techniques
Siemens
Siemens SITRANS F Coriolis FCT030 Manuel de la liste des pièces
KLINGER
KLINGER CMF V Series Manuel utilisateur
EXFO
EXFO FTB-2 Manuel d'exploitation et d'entretien
Keysight
Keysight M8290A Manuel utilisateur
ADTEK
ADTEK MW-5 Manuel utilisateur