5
General
Safety
Before using your system for the rst me, please read the Health & safety
secon of the user guide.
Ensure that:
Your system and accessories are operated, maintained and repaired by
authorised and trained personnel only.
All operators have read, understood and observe the user manual, in
parcular the safety regulaons.
Servicing
Repairs may only be carried out by Vision Engineering-trained service
personnel. Only original Vision Engineering spare parts may be used.
Symbols used
Warning!
A potenal risk of danger exists. Failure to comply can cause i) a hazard
to personnel; ii) instrument malfuncon and damage. Please consult the
operang instrucons provided with the product.
Importantinformaon
This symbol indicates important informaon. Please carefully follow the
instrucons or guidelines.
Health & safety
Unauthorisedalteraonstotheinstrumentornon-compliantuseshallinvalidate
allrightstoanywarrantyclaims.
Electrical safety
Disconnect your system from the electrical source before undertaking
any maintenance.
Avoid using any form of liquid near the system.
Do not operate your system with wet hands.
Only use with the power supply unit provided, in case of a lost or
damaged power supply, the correct replacement must be obtained from
Vision Engineering.
Illuminaon safety
Do not look directly at the illuminated LED’s. This may cause damage to
the eyesight.
Environmental consideraons
Avoid large temperature uctuaons, direct sunlight and vibraons.
Ensure electrical components are at least 10cm from walls and
combusble materials.
Posion the system on a rm, rigid and level table.
The equipment should be posioned so that access to the electrical input
connector is always available.
Avoid posioning your system where bright reecons may aect the image.
