Vip-Vision ACCON-2C41 Manuel utilisateur

VIP Vision Access Controller

User’s Manual

Four-door One-way Compact Access Controller - ACCON - 2C41

Two-door Two-way Professional Access Controller - ACCON - 2P22

Four-door One-way Professional Access Controller - ACCON - 2P41

Four-door Two-way Professional Access Controller - ACCON - 2P42

Eight-door One-way Professional Access Controller - ACCON - 2P81

VIP Professional Access Controller User’s Manual - v3.00 Issued Dec.2018

Important Safeguards and Warnings.......................................................................................................................3

1 Pre-Installation....................................................................................................................................................4

1.1 Installation Requirements &Notes...........................................................................................................4

1.2 Factory Default Settings..............................................................................................................................4

1.3 Components..................................................................................................................................................5

2 Dimensions........................................................................................................................................................ 10

3 Access Controller Installation......................................................................................................................... 12

3.1 System Diagram....................................................................................................................................... 12

3.2 Wiring Diagrams....................................................................................................................................... 13

3.3 Installation Step by Step..........................................................................................................................18

3.3.1 Setting up door lock jumpers (2P42 and 2P81 ONLY)........................................................ 18

3.3.2 Connecting door locks...............................................................................................................18

3.3.4 Connecting card readers, fingerprint readers and keypads................................................21

3.3.5 Connecting external alarm inputs (if necessary)...................................................................21

3.3.6 Connecting external alarm outputs (if necessary)................................................................ 22

3.3.7 Connecting power cable (2P series) / DC power adaptor (2C).......................................... 22

3.3.8 Connecting network cable........................................................................................................ 23

3.3.9 Connecting a backup battery (2P series only).........................................................................23

4 Smart PSS PC Console...................................................................................................................................24

4.1 Cybersecurity Recommendations.......................................................................................................... 24

4.2 Smart PSS Installation Step by Step.....................................................................................................25

4.2.1 Install the Smart PSS software................................................................................................ 25

4.2.2 Set password for the Smart PSS.............................................................................................26

4.2.3 Configure the PC network card (Ethernet card)....................................................................27

4.2.4 Add the access controller to Smart PSS................................................................................29

4.2.5 Synchronize time with PC.........................................................................................................31

4.2.6 Add users.................................................................................................................................... 33

4.2.7 Add fingerprints.......................................................................................................................... 35

4.2.8 Add door groups.........................................................................................................................36

4.2.9 Set time schedules.................................................................................................................... 38

4.2.10 Set holiday schedules............................................................................................................... 40

4.2.11 Assign user access levels........................................................................................................ 43

4.2.12 Configure doors..........................................................................................................................44

4.2.13 Log Records and Log Files...................................................................................................... 46

4.3 Advanced Functions.................................................................................................................................47

4.3.1 First card unlock........................................................................................................................47

4.3.2 Multi-card unlock.......................................................................................................................49

4.3.3 Anti-passback............................................................................................................................ 53

4.3.4 Inter-door lock............................................................................................................................54

4.3.5 Remote Verification................................................................................................................. 55

4.4 Events.........................................................................................................................................................59

5 Troubleshooting.................................................................................................................................................61

6 FAQs...................................................................................................................................................................63

7 After Installation................................................................................................................................................ 67

8Limited Warranty.............................................................................................................................................. 68

Table of Contents

VIP Professional Access Controller User’s Manual - v3.00 Issued Dec.2018

Important Safeguards and Warnings

Please read the following safeguards and warnings carefully before using the product in order to

avoid damages losses and body injuries.

Note:

Do not install the device at position exposed to sunlight or in high temperature. Temperature

rise in device may cause fire.

Do not expose the device to lampblack, steam or dust. Otherwise it may cause fire or

electric shock.

The device must be installed on solid and flat surface in order to guarantee safety under

load and earthquake. Otherwise, it may cause device to fall off or turnover.

Do not drop or splash liquids onto the device, and do not place container with full liquid on

the device to prevent liquid spilling from entering the device.

Do not block air vent of the device or ventilation around the device. Otherwise, temperature

in device will rise and may cause fire.

Use the device only within rated input and output range.

Install, assemble and disassemble by qualified personnel only.

Transport, use and store the product under appropriate temperature and humidity.

Warning:

Please use battery properly to avoid fire, explosion and other dangers.

Please replace used battery with battery of the same type.

Do not use power line other than the one specified. Please use it properly within rated range.

Otherwise, it may cause fire or electric shock.

Always connect a ground (earth) wire to the access controller’s chassis. Connecting the unit

without a protective ground, or interruption of the grounding can cause harm to the unit or to

the equipment connected to it. (2P series only)

Notice Information

All the designs, software and instructions here are subject to change without prior written

notice.

We would not be responsible for any damages and losses caused by improper operations

or installation. Do not allow non-authorized or unqualified personnel with any kind of

intervention to the product.

All trademarks and registered trademarks are the properties of their respective owners.

Please visit our website www.rhinoco.com.au for more information.

VIP Professional Access Controller User’s Manual - v3.00 Issued Dec.2018

1 Pre-Installation

1.1 Installation Requirements & Notes

You must install the Smart PSS on a PC to add users, set up access rights and other functions

of the access controller.

You must change the IP address of the PC network card in order to control the access controller.

Refer to the Smart PSS User’s Manual for details.

1.2 Factory Default Settings

You must enter the correct IP/Domain Name, User Name and Password to add the access

controller to the PC platform.

The default settings are as follow:

IP/Domain Name: 192.168.0.2

User Name: admin

Password: 123456

*** If a dialogue box pops up asking for

maintenance password, enter

s4musvvcai

VIP Professional Access Controller User’s Manual - v3.00 Issued Dec.2018

1.3 Components

Access Controller

Supports up to 100,000 NFC cards & stores up to 150,000

events

Supports high security NFC IC cards (13.56MHz)

Supports NFC card readers, keypads, fingerprint readers

and combinations

Supports Wiegand or RS-485 interface to NFC card readers,

keypads and fingerprint readers*(up to 4 doors)

Intelligent functions: First card unlock, Multi-card unlock,

Anti-pass back, Inter door lock, Remote verification

Supports up to 128 normal, period and holiday schedules

Door unlock push button inputs

Door open/close status sensing inputs

External alarm input(s)

External alarm output(s)

Internal alarms: Door time out alarm, intrusion alarm, duress

alarm and tamper alarm

Emergency features: All doors lock/unlock by two clicks

RTC (Real Time Clock) battery backup

RFID Card Readers & Keypads

Fingerprint + RFID Card Reader

Model: ACRDR-2SFC

Supports RS-485 protocol

RFID IC card (Mifare)

Supports cards and fingerprints

Blue backlight

Buzzer and Dual Colour LED indicator

Vandal-Proof Keypad + RFID Card Reader

Model: ACRDR-2MKC

Supports RS485 and Wiegand34 protocol

RFID IC card (Mifare)

Metal buttons with blue backlight

LED indicator

VIP Professional Access Controller User’s Manual - v3.00 Issued Dec.2018

Touch Keypad + RFID Card Reader

Model: ACRDR-2LKC

Supports RS485 and Wiegand34 protocol

RFID IC card (Mifare)

Sensitive touch keypad with blue backlight

Buzzer and Dual Colour LED indicator

Waterproof RFID Card Reader

Model: ACRDR-2PC

Supports RS485 and Wiegand34 protocol

RFID IC card (Mifare)

Buzzer and Dual Colour LED indicator

Waterproof IP67 rating

Slim Waterproof RFID Card Reader

Model: ACRDR-2SC

Supports RS485 and Wiegand34 protocol

RFID IC card (Mifare)

Buzzer and Dual Colour LED indicator

Waterproof IP65 rating

Slim Waterproof RFID Card Reader + Keypad

Model: ACRDR-2SKC

Supports RS485 and Wiegand34 protocol

RFID IC card (Mifare)

Buzzer and Dual Colour LED indicator

Waterproof IP65 rating

VIP Professional Access Controller User’s Manual - v3.00 Issued Dec.2018

Enrollment Readers

RFID Card Enrollment Reader

Model: ACENR-2C

Plug and Play, no driver is need

USB powered

Buzzer and LED indicator

Frequency: 13.56MHz

Fingerprint Enrollment Reader

Model: ACENR-2F

Plug and Play, no driver is need

USB powered

Resolution: 500 dpi

Door Release Buttons

Heavy Duty Door Release Button

Model: ACDSW100

Sandblasted Aluminium finish

3 output contacts (N.O, N.C, COM)

3A at 36VDC max. current rating

Mechanical design life (typical): 500,000 cycles

Dimensions: 86 x 50 x 28.9mm

Slim, Aluminium & Stainless Steel Door Release Button

Model: ACDSW101

Aluminium, stainless steel button

2 output contacts (N.O, COM)

3A at 36VDC max. current rating

Mechanical design life (typical): 500,000 cycles

Dimensions: 86 x 28 x 20mm

VIP Professional Access Controller User’s Manual - v3.00 Issued Dec.2018

Aluminium Door Release Button with LEDs and Timer

Model: ACDSW101

3 output contacts (N.O, N.C, COM)

Red/Green active status LEDs

2A at 30VAC/DC contact rating

Adjustable timer output 1~40s

Dimensions: 120 x 76 x 18mm

RFID Cards

RFID IC Card

Model: ACKEY103

High Frequency 13.56MHz RFID

Slim

Dimensions: 85.6 x 54 x 0.8mm

Electric Door Strikes

Mortise Electric Door Strike

Model: ACLOC100

Face Plate: Steel

Keeper Depth 9.6 mm

Lock Configuration: Fail-secure

Door Sensor: No

Lock Sensor: No

Power Input: 12VDC at 400mA

Dimensions: 160 x 31 x 31.4 mm

Surface Mount Electric Door Strike

Model: ACLOC101

Face Plate: Steel

Keeper Depth 9.6 mm

Lock Configuration: Fail-secure

Door Sensor: No

Lock Sensor: No

Power Input: 12VDC at 400mA

Dimensions: 108 x 50 x 31.4 mm

VIP Professional Access Controller User’s Manual - v3.00 Issued Dec.2018

Monitored Mortise Electric Door Strike

Model: ACLOC102

Face Plate: Stainless Steel

Keeper Depth: 12.7 mm

Lock Configuration: Convertible: Fail-safe / Fail-secure

Door Sensor: Yes

Lock Sensor: Yes

Power Input: 12VDC at 260mA

Dimensions: 165 x 31 x 40.2 mm

Monitored Multi-Voltage Mortise Electric Door Strike

Model: ACLOC103

Face Plate: Stainless Steel

Keeper Depth: 10.8 mm

Lock Configuration: Convertible: Fail-safe / Fail-secure

Door Sensor: Yes

Lock Sensor: Yes

Power Input: 12VDC at 260mA

Dimensions: 175 x 29 x 26 mm

Power Input: 12/24VDC at 280/140mA

12/24VAC at 170/85mA

Chrome Mortise Electric Door Strike

Model: ACLOC104

Face Plate: Chrome-plated steel

Keeper Depth 9.6 mm

Lock Configuration: Fail-secure

Door Sensor: No

Lock Sensor: No

Power Input: 12VDC at 400mA

Dimensions: 144.5 x 36.4 x 25 mm

Ce manuel convient aux modèles suivants

Table des matières

Autres manuels Vip-Vision Contrôleurs d'accès IP

Vip-Vision

Vip-Vision ACCON Series Manuel utilisateur

Manuels Contrôleurs d'accès IP populaires d'autres marques

ZKTeco

ZKTeco SpeedFace-V5L Manuel utilisateur

Jantar

Jantar REX A-1-9 Manuel utilisateur

2N Access Unit Feuille d'instructions

Kedacom

Kedacom KSCA120 Series Manuel utilisateur

H3C

H3C WX2880X Manuel utilisateur

G4S

G4S S870-EX Mode d’emploi

PRASTEL

PRASTEL M2000PE Manuel utilisateur

Allegion

Allegion interflex IF-281 Cylinder Manuel utilisateur

TECOM

TECOM TS1067E Manuel utilisateur

Fermax

Fermax Memokey 100C Guide de l'utilisateur

Fermax

Fermax CITYLINE MEMOKEY Mode d’emploi

Software House

Software House iSTAR Pro 2U RM Mode d’emploi

AKCP

AKCP SP+ Manuel utilisateur

Bpt

Bpt HNA/102 Manuel utilisateur

Civintec

Civintec CV9601T-T-1F Manuel utilisateur

BioMax

BioMax N-X90W Manuel utilisateur

ZKTeco

ZKTeco OP-200 Manuel utilisateur

FingerTec

FingerTec s-Kadex Manuel utilisateur