Vinotemp 700 Manuel utilisateur

Disassemble/Assemble instructions

FOR YOUR PERSONAL WINECELLAR

BEFORE PROCEEDING, PLEASE READ ALL INSTRUCTIONS FIRST!

The tools required for disassembly and reassembly of your custom Winecellar are as follows:

A) 7/16 Wrench

B) Phillips Head Screwdriver

C) Metric 4mm Hex Wrench

D) 1/4” Nut Driver

You will need a clean level area. It will be necessary for 2 or 3 people to help in disassembly to

complete the following instructions:

1. Remove shipping carton and packing material with exception to pallet. Open door

and remove the plastic bag containing four or six casters depending on the size of

unit.

2. Place the cardboard on ground behind winecellar.

3. With the 7/16” wrench, remove the two baits at the top of cooling unit. Carefully

slide the unit out and place it on the ground out of the way in an upright position,

being careful not to damage the insulated bottom.

4. If you have a model 700, remove the middle bar by removing center screw in

back brace, then remove screws on top and bottom of middle bar.

5. Carefully remove the screws that are on the cabinet side of the hinge making sure

someone is holding the door while screws are being removed. Place the door on

cardboard to the side of winecellar.

6. With the Phillips Head Screwdriver or 1/4” Nut Driver carefully remove the

screws holding the bottle racks, be sure to save the screws which are located in

the top back of rack. Remove entire rack. (Standard cellar trellis racks)

Note:Models with horizontal support bar (single door 440 and single door 400),

the bar must be removed prior to removing rack.

Removal of E-Line (Black Metal) Racks:

-Remove the cellar trellis row sticks from the top of rack.

-Remove the rack spacers on each side, one by one, starting from the

bottom and proceeding to the top.

-Remove the four black metal grids one by one.

-Remove spacers from bottom of unit.

Page 1 of 2 DISASSEMBLY/ASSEMBLY INSTRUCTIONS FOR

YOUR PERSONAL WINECELLAR

7. Carefully tilt

the unit back and place’on cardboard packing or padding so as to

not damage the cabinet.

8. With the 4mm Hex Wrench, careftilly remove bolts on side of cabinet and

place side on cardboard.

9. Having someone holding the top and bottom ends, remove bolts on other side.

Place the side on cardboard.

10. Remove the bolts at top of unit. Place top on cardboard.

Now your winecellar is ready to be carefully moved into its final destination.

ASSEMBLY INSTRUCTIONS

1. Install the casters all the way in on the bottom piece first.

2. To assemble our unit follow the disassembly instructions in reverse.

3. If doors appear not to be aligned, level the cellar as best possible by screwing the

casters back out slowly checking alignment with each adjustment.

4. The unit can be moved to your desired location, being sure to allow 5 to 6 inches

of clearance from the back of winecellar to the wall.

5. Your unit is now ready. to plug into a dedicated 110/115 volt outlet for your

winecellar. We recommend that you do not plug your winecellar into an outlet

used for other electronic items in addition to the winecellar.

Page 2 of 2

Ce manuel convient aux modèles suivants

1

Table des matières

Autres manuels Vinotemp Refroidisseur de vin

Vinotemp

Vinotemp 2500SSR Manuel utilisateur

Vinotemp

Vinotemp VT-18TEDS Manuel utilisateur

Vinotemp

Vinotemp VT-12TSP - 2Z Manuel utilisateur

Vinotemp

Vinotemp VT-188 Manuel utilisateur

Vinotemp

Vinotemp VT-6TEDS Manuel utilisateur

Vinotemp

Vinotemp VT-52SN Manuel utilisateur

Vinotemp

Vinotemp VT-24TS-2Z Manuel utilisateur

Vinotemp

Vinotemp VT-45 Manuel utilisateur

Vinotemp

Vinotemp WM-3520HZD Instructions d'utilisation

Vinotemp

Vinotemp 2500SSR Manuel utilisateur

Vinotemp

Vinotemp VT-6TEDS Manuel utilisateur

Vinotemp

Vinotemp WINE-MATE VINO1500HZD Manuel utilisateur

Vinotemp

Vinotemp WINE-MATE WM-4520SSH Manuel utilisateur

Vinotemp

Vinotemp VT-45 Manuel utilisateur

Vinotemp

Vinotemp VT-140TSBW Manuel utilisateur

Vinotemp

Vinotemp VT-18TEDS Manuel utilisateur

Vinotemp

Vinotemp VT-18TEDS Manuel utilisateur

Vinotemp

Vinotemp VC7S Manuel utilisateur

Vinotemp

Vinotemp IL Romanzo IL-OW006-2Z Manuel utilisateur

Vinotemp

Vinotemp TC32G Manuel utilisateur

Vinotemp

Vinotemp VT-12TEDS Manuel utilisateur

Vinotemp

Vinotemp 1500CD Manuel utilisateur

Vinotemp

Vinotemp VT-28-TEDS Manuel utilisateur

Vinotemp

Vinotemp VT- 36 Manuel utilisateur

Manuels Refroidisseur de vin populaires d'autres marques

U-Line

U-Line Echelon Wine Captain 2075WC Manuel du propriétaire

Haier

Haier WS50GA Manuel utilisateur

Cavist

Cavist 62 Manuel utilisateur

Kenmore

Kenmore 461.99130 Manuel utilisateur

Miele

Miele KWT 6422 iG Manuel utilisateur

Danby

Danby DWC113BLSDB Manuel utilisateur

Caple

Caple Wi6128 Manuel utilisateur

Avanti

Avanti WC1001 Manuel utilisateur

Frigidaire

Frigidaire FFWC38F6LS Manuel utilisateur

Titan

Titan TT-W2454SZ Manuel d'installation

Klarstein

Klarstein Botella 166 Uno Manuel utilisateur

Costway

Costway FP10130WL Manuel utilisateur

Lemair

Lemair LWC59 Manuel utilisateur

Haier

Haier JC-125GEA Manuel utilisateur

Caple

Caple WCi46B Manuel utilisateur

Climadiff

Climadiff CLI24 Guide rapide

Viking

Viking VCWB301LSS Manuel utilisateur

Caple

Caple WC6511 Manuel utilisateur