Viking Pure 1000 Manuel utilisateur

1 | P a g e

Viking Pure, LLC

501 Pullman Rd., Edgewater, Fl. 32132, USA

User Manual

Sailing Toward aGreener Tomorrow

Viking Pure 1000

™

A Revolutionary system used to produce both a cleaner and a sanitizer

from just salt, water, and electricity. It is not only a greener solution

to cleaning… it is 100% NON-TOXIC.

Model Numbers:

PN: VPC1000 (115/230 VAC)

Viking Pure 1000 (Control Only)

PN: VPT2501 (115/230 VAC)

Twin 25 Gallon Pump System

PN: VPT5001 (115/230 VAC)

Twin 50 Gallon Pump System

2 | P a g e

Viking Pure, LLC

501 Pullman Rd., Edgewater, Fl. 32132, USA

3 | P a g e

Viking Pure, LLC

501 Pullman Rd., Edgewater, Fl. 32132, USA

Contents

Warnings...... . .. . . .. . . . . .. . . . .. . . .. . . .4

ControlOnly

ControlDiagrams

VPC1000(FrontView).............5

VPC1000(BottomView)...........6

VPC1000(CellDiagram)...........7

SettingUpYourControl

Pre-installationWaterTest.........8

Diagram.........................9

Instructions.......................10

StartingControl...................11

DisplayScreenFunctions

StandardFunctionButtons.......... 12

TitleScreen........................13

MenuScreen......................14

RunScreen(TurningOn)............15

RunScreen(TurningOff)............16

Set-upScreen(MaxTankLevels)....17

Set-upScreen(MinTankLevels).....18

TankScreen(SystemOn)...........19

TankScreen(SystemOff)...........20

TankScreen(HOClPump).........21

TankScreen(NaOHPump)..... . . . .22

TimeScreen. . . . . . . ...............23

StandbyScreen...... . . . . .. . . .. . . ..24

InformationScreen. . . .. . . . . .. . . .. . .25

DistributorInfoScreen..............26

Re-orderInfoScreen. ..............27

25GallonTank Unit

Pump,Twin25Gallon...........28

PumpUnitFootprint..... ..29

50GallonTank Unit

Pump,Twin50Gallon...........30

PumpUnitFootprint..... ..31

UserInformation

AddingSalt...............32

Warranty.................33

UserReferenceGuide.....34

OtherProducts........... 35

4 | P a g e

Viking Pure, LLC

501 Pullman Rd., Edgewater, Fl. 32132, USA

Warnings

The following warnings include general safety information for this equipment with detailed descriptions.

WARNING

ELECTRIC SHOCK HAZARD

Improper grounding, setup, or usage of the system can cause electric shock.

•

Turn off and disconnect power cord before servicing equipment.

•

Use only grounded electrical outlets.

•

Use only 3-wire extension cords.

PRESSURIZED EQUIPMENT HAZARD

Components in this system are pressurized and have the potential to rupture if not properly used.

•

Follow Maintenance Procedures as stated in this manual, when you stop using and before

cleaning, checking, or servicing equipment

•

Tighten all fluid connections before operating the equipment.

•

Follow fluid regulator instructions stating maximum PSI allowance.

EQUIPMENT MISUSE HAZARD

Misuse can cause death or serious injury.

•

Misuse of equipment will damage unit, void warranty (if new), or cause serious injury, even death.

•

Check equipment daily. Repair or replace worn or damaged parts immediately.

•

Do not alter or modify equipment.

•

For use only by trained staff.

•

Use equipment only for its intended purpose. Call your Viking Pure 1000 distributor for information.

•

Route hoses and cables away from traffic areas, sharp edges, moving parts, and hot surfaces.

•

Do not use hoses to pull equipment.

•

Only use Viking accessories for this unit. Any other accessories may damage unit & void warranty

Only Use Viking Pure® Salt

Use of any other types of salt will damage unit’s membranes, chemically change the solutions, and

may even cause physical harm.

WARNING

If you have any questions or

comments regarding the warning

information above please contact us

at:

[email protected]

1-(386)-428-9800

5 | P a g e

Viking Pure, LLC

501 Pullman Rd., Edgewater, Fl. 32132, USA

Control Diagrams

VPC1000

Viking Pure 1000 Control

(Front View)

Key

1. Power Switch

2. Salt Tube Cap/Salt Input

3. Control Door Latches

4. Salt Tube Level Window- Used

to determine when you need to add

another salt cartridge.

5. Salt Tube Drain Valve –Used to

drain salt tube when adding a new

salt cartridge. (See adding salt)

6. Sodium Hydroxide Outlet- This

is where the Sodium Hydroxide

(NaOH) solution exits the cell into

a tank (only with tank units) or a

container.

7. Hypochlorous Acid Outlet- This

is where the Hypochlorous Acid

(HOCl) solution exits the cell into

a tank (only with tank units) or a

container.

8. External Tanks Connector (For

use only on tank units)

9. Power Input

10. Display Screen- This is a display

that utilizes both touch technology

and use of the function buttons.

(See pages 9-27)

6 | P a g e

Viking Pure, LLC

501 Pullman Rd., Edgewater, Fl. 32132, USA

Control Diagrams

VPC1000

Viking Pure 1000 Control

(Bottom View)

Key

11. Control Door Latches

12. Salt Tube Drain Valve –Used to

drain salt tube when adding a new

salt cartridge. (See adding salt)

13. Sodium Hydroxide Outlet- This

is where the Sodium Hydroxide

(NaOH) solution exits the cell into

a tank (only with tank units) or a

container.

14. Hypochlorous Acid Outlet- This

is where the Hypochlorous Acid

(HOCl) solution exits the cell into

a tank (only with tank units) or a

container.

15. External Tanks Connector (For

use only on tank units)

16. Power Input

17. Display Screen- This is a display

that utilizes both touch technology

and use of the function buttons.

(See pages 9-27)

18. Filtered Water Inlet

7 | P a g e

Viking Pure, LLC

501 Pullman Rd., Edgewater, Fl. 32132, USA

Cell Diagrams

VP1000

Viking Pure 1000 Cell Diagram

Key

19. Sodium Hydroxide Flow

Control- This should be adjusted

only under the direction of a

Viking Pure representative

20. Blue Tubes- Denotes all tubing

used to transport Sodium

Hydroxide

21. Hypochlorous Acid Flow

Control- This should be adjusted

only under the direction of a

Viking Pure representative

22. Red Tubes- Denotes all tubing

used to transport Hypochlorous

Acid

23. Salt Brine Inlet(s)- This is where

the salt brine from the salt tube

enters the cell

24. Yellow Tubes- Denotes all tubing

used to transport salt brine from

the salt tube to the Electrolyzer

Cell

25. Filtered Water Inlet(s)- This is

where the filtered water will enter

the Electrolyzer Cell

26. Power Harness

8 | P a g e

Viking Pure, LLC

501 Pullman Rd., Edgewater, Fl. 32132, USA

Setting Up Your Control

Pre-Installation Hard Water Test

1. Before installing your system you should do a quick Hard Water Test.

2. This test can be done by bringing a sample of your water (fresh out of the tap) to a local

water testing facility or you may purchase a water testing kit from Viking Pure.

3. The different levels you will be testing for are as follows:

a. Degrees Hardness: This test should result in NO MORE than 5 dH.

b. Parts per Million: This test should result in NO MORE than 100 PPM.

c. Grains per Gallon: This test should result in NO MORE than 5 gpg.

d. Milligrams per Liter: This test should result in NO MORE than 90 Mg/L

4. The test must be performed to determine if a water softener is needed to run the system

properly.

5. If a water softener is needed, shown by failed testing, one must be installed or warranty

will be void (See page 38 for all warranty information). This is due to the fact that hard

water will damage the membranes in the cell and drastically affect the lifespan of the

unit.

9 | P a g e

Viking Pure, LLC

501 Pullman Rd., Edgewater, Fl. 32132, USA

Setting up your Control: Diagram

Water

Source

Water

Filter

(Included)

Power Inlet

(Either 115V

or 220V)

(See adding

salt for more

information)

10 | P a g e

Viking Pure, LLC

501 Pullman Rd., Edgewater, Fl. 32132, USA

Setting Up your Control

Instructions

1. *Properly secure control to a vertical surface using 2 mounting locations.

2. Attach tubing (Included) to the proper fitting on base of control. (Make sure you

connect the right tubing from the HOCl and NaOH outlets, on bottom of control,

to the correct tanks).

3. Install water filter (Included) on water supply and run tubing (Included) to the

“Filtered Water Inlet” located at the base of the control. .

4. Connect power cord(s) (Included) to the control, lower left side, and to an outlet

corresponding to the correct voltage of the unit.

*Mounting hardware not included.

Ce manuel convient aux modèles suivants

Table des matières

Autres manuels Viking Pure Système d'eau

Viking Pure

Viking Pure Mini Pure VPM Manuel utilisateur

Manuels Système d'eau populaires d'autres marques

Spirotech

Spirotech SPIROVENT SUPERIOR S250 Manuel utilisateur

Culligan

Culligan Aqua-Cleer Aqua-Cleer Advanced Drinking Water... Manuel utilisateur

A.O. Smith

A.O. Smith Dura-Max AJH - 1000A - P Manuel utilisateur

Microline

Microline T.F.C.-4 Manuel

Eureka Forbes

Eureka Forbes Aquaguard Select Manuel utilisateur

Cetetherm

Cetetherm AquaEfficiency Manuel utilisateur

CB Tech

CB Tech CB-VOC Manuel utilisateur

Vaillant

Vaillant auroFLOW plus VPM 15 D Manuel utilisateur

resideo

resideo Braukmann HS10S Manuel utilisateur

Gude

Gude INOX 100/24 Manuel utilisateur

Mono

Mono Eco 1-60 Manuel

SpectraPure

SpectraPure Drinking Water Kit Manuel utilisateur

HydroCare

HydroCare Dual Action Manuel utilisateur

NEXT pool

NEXT pool STERILOR Cu/Ag Schéma de câblage

Alpha

Alpha SolarSmart 150 Guide de l'utilisateur

TA FRISTAR3 Manuel utilisateur

GÜDE

GÜDE HWA 800 K Manuel utilisateur

Rainfresh

Rainfresh UCS2 Manuel utilisateur