ViewSonic PJ1173 - XGA LCD Projector Manuel utilisateur

ViewSonic®

PJ1173

LCD Projector

IMPORTANT: Please read this User Guide to obtain important information on

installing and using your product in a safe manner, as well as registering your

product for future service. Warranty information contained in this User Guide will

describe your limited coverage from ViewSonic Corporation, which is also found

on our web site at http://www.viewsonic.com in English, or in specic languages

using the Regional selection box in the upper right corner of our website.

“Antes de operar su equipo lea cuidadosamente las instrucciones en este manual”

- User Guide

- Guide de l’utilisateur

- Bedienungsanleitung

- Guía del usuario

- Guida dell’utente

- Guia do usuário

- Användarhandbok

- Käyttöopas

- Руководство пользователя

- 使用手冊 (繁體)

- 使用手冊 (簡體)

- 사용자 안내서

Model No. : VS12109

PJ1173ViewSonic i

Compliance Information

FCC Statement

This device complies with part 15 of FCC Rules. Operation is subject to the following two

conditions: (1) this device may not cause harmful interference, and (2) this device must accept

any interference received, including interference that may cause undesired operation.

This equipment has been tested and found to comply with the limits for a Class B digital device,

pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection

against harmful interference in a residential installation. This equipment generates, uses, and can

radiate radio frequency energy, and if not installed and used in accordance with the instructions,

may cause harmful interference to radio communications. However, there is no guarantee that

interference will not occur in a particular installation. If this equipment does cause harmful

interference to radio or television reception, which can be determined by turning the equipment

off and on, the user is encouraged to try to correct the interference by one or more of the

following measures:

• Reorient or relocate the receiving antenna.

• Increase the separation between the equipment and receiver.

• Connect the equipment into an outlet on a circuit different from that to which the receiver

is connected.

• Consult the dealer or an experienced radio/TV technician for help.

Warning: You are cautioned that changes or modications not expressly approved by the party

responsible for compliance could void your authority to operate the equipment.

For Canada

• This Class B digital apparatus complies with Canadian ICES-003.

• Cet appareil numérique de la classe B est conforme à la norme NMB-003 du Canada.

CE Conformity for European Countries

The device complies with the requirements of the EEC directive 2004/108/EC

as amended by 92/31/EEC and 93/68/EEC Art.5 with regard to “Electromagnetic

compatibility”, and 2006/95/EC as amended by 93/68/EEC Art.13 with regard to

“Safety.”

Following information is only for EU-member states:

The mark shown to the right is in compliance with the Waste Electrical and Electronic

Equipment Directive 2002/96/EC (WEEE).

The mark indicates the requirement NOT to dispose the equipment as unsorted municipal

waste, but use the return and collection systems according to local law.

PJ1173ViewSonic ii

Important Safety Instructions

1. Read these instructions.

2. Keep these instructions.

3. Heed all warnings.

4. Follow all instructions.

5. Do not use this unit near water.

6. Clean with a soft, dry cloth. If still not clean, see “Cleaning the Display” in this guide for

further instructions.

Do not block any ventilation openings. Install the unit in accordance with the manufacturer’s

instructions.

8. Do not install near any heat sources such as radiators, heat registers, stoves, or other

devices (including ampliers) that produce heat.

9. Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug

has two blades with one wider than the other. A grounding type plug has two blades and a

third grounding prong. The wide blade and the third prong are provided for your safety. If

the provided plug does not t into your outlet, consult an electrician for replacement of the

obsolete outlet.

10. Protect the power cord from being walked on or pinched particularly at plugs. Convenience

receptacles and the point where they exit from the unit. Be sure that the power outlet is

located near the unit so that it is easily accessible.

11. Only use attachments/accessories specied by the manufacturer.

12. Use only with the cart, stand, tripod, bracket, or table specied by the

manufacturer, or sold with the unit. When a cart is used, use caution when

moving the cart/unit combination to avoid injury from tipping over.

13. Unplug this unit when unused for long periods of time.

14. Refer all servicing to qualied service personnel. Servicing is required when the unit has

been damaged in any way, such as: if the power-supply cord or plug is damaged, if liquid is

spilled onto or objects fall into the unit, if the unit is exposed to rain or moisture, or if the

unit does not operate normally or has been dropped.

PJ1173ViewSonic iii

Declaration of RoHS Compliance

This product has been designed and manufactured in compliance with Directive 2002/95/EC of

the European Parliament and the Council on restriction of the use of certain hazardous substances

in electrical and electronic equipment (RoHS Directive) and is deemed to comply with the

maximum concentration values issued by the European Technical Adaptation Committee (TAC)

as shown below:

Substance Proposed Maximum

Concentration Actual Concentration

Lead (Pb) 0.1% < 0.1%

Mercury (Hg) 0.1% < 0.1%

Cadmium (Cd) 0.01% < 0.01%

Hexavalent Chromium (Cr6+) 0.1% < 0.1%

Polybrominated biphenyls (PBB) 0.1% < 0.1%

Polybrominated diphenyl ethers (PBDE) 0.1% < 0.1%

Certain components of products as stated above are exempted under the Annex of the RoHS

Directives as noted below:

Examples of exempted components are:

1. Mercury in compact uorescent lamps not exceeding 5 mg per lamp and in other lamps not

specically mentioned in the Annex of RoHS Directive.

2. Lead in glass of cathode ray tubes, electronic components, uorescent tubes, and electronic

ceramic parts (e.g. piezoelectronic devices).

3. Lead in high temperature type solders (i.e. lead-based alloys containing 85% by weight or

more lead).

4. Lead as an allotting element in steel containing up to 0.35% lead by weight, aluminium

containing up to 0.4% lead by weight and as a cooper alloy containing up to 4% lead by

weight.

PJ1173ViewSonic iv

Macintosh and Power Macintosh are registered trademarks of Apple Computer, Inc.

Microsoft, Windows, Windows NT, and the Windows logo are registered trademarks of Microsoft

Corporation in the United States and other countries.

ViewSonic, the three birds logo, OnView, ViewMatch, and ViewMeter are registered trademarks

of ViewSonic Corporation.

VESA is a registered trademark of the Video Electronics Standards Association. DPMS and DDC

are trademarks of VESA.

PS/2, VGA and XGA are registered trademarks of International Business Machines Corporation.

Disclaimer: ViewSonic Corporation shall not be liable for technical or editorial errors or

omissions contained herein; nor for incidental or consequential damages resulting from furnishing

this material, or the performance or use of this product.

In the interest of continuing product improvement, ViewSonic Corporation reserves the right to

change product specications without notice. Information in this document may change without

notice.

No part of this document may be copied, reproduced, or transmitted by any means, for any

purpose without prior written permission from ViewSonic Corporation.

Product Registration

To meet your future needs, and to receive any additional product information as it becomes

available, please register your product on the Internet at: www.viewsonic.com. The ViewSonic®

Wizard CD-ROM also provides an opportunity for you to print the registration form, which you

may mail or fax to ViewSonic.

For Your Records

Product Name:

Model Number:

Document Number:

Serial Number:

Purchase Date:

PJ1173

ViewSonic LCD Projector

VS12109

PJ1173_UG_ENG Rev. 1A 11-22-07

_____________________________________

The lamp in this product contains mercury.

Please dispose of in accordance with local, state or federal laws.

PJ1173ViewSonic 1

Projector

PJ1173

User's Manual (detailed) – Operating Guide

Thank you for purchasing this projector.

►Before using this product, please read the "User's Manual -

Safety Guide" and related manuals to ensure the proper use of this product.

After reading them, store them in a safe place for future reference.

WARNING

• The information in this manual is subject to change without notice.

• The manufacturer assumes no responsibility for any errors that may appear in

this manual.

• The reproduction, transfer or copy of all or any part of this document is not

permitted without express written consent.

NOTE

Trademark acknowledgment

• Mac is registered trademarks of Apple Computer, Inc.

• VESA and SVGA are trademarks of the Video Electronics Standard Association.

• Windows is a registered trademark of Microsoft Corporation.

• is a trademark of SRS Labs, Inc.

• WOW technology is incorporated under license from SRS Labs, Inc.

• HDMI, the HDMI logo and High-Denition Multimedia Interface are trademarks

or registered trademarks of HDMI Licensing LLC.

All other trademarks are the properties of their respective owners.

Various symbols are used in this manual. The meanings of these symbols are

described below.

About this manual

WARNING

CAUTION

This symbol indicates information that, if ignored, could possibly

result in personal injury or even death due to incorrect handling.

This symbol indicates information that, if ignored, could possibly

result in personal injury or physical damage due to incorrect

handling.

Please refer to the pages written following this symbol.

PJ1173ViewSonic 2

Contents

About this manual. . . . . . . . . . . 1

Contents . . . . . . . . . . . . . . . . . . 2

Projector features. . . . . . . . . . . 4

Preparations . . . . . . . . . . . . . . . 4

Contents of package.............4

Fastening the lens cover. . . . . . . . . . 4

Part names . . . . . . . . . . . . . . . . 5

Projector......................5

Controlpanel...................6

Rearpanel ....................6

Remote control . . . . . . . . . . . . . . . . . 7

Setting up . . . . . . . . . . . . . . . . . 8

Arrangement...................9

Adjusting the projector's elevator . . 10

Using the security bar and slot . . . . 10

Connecting your devices. . . . . . . . . 11

Connecting power supply . . . . . . . . 13

Remote control . . . . . . . . . . . . 14

Laser pointer..................14

Putting batteries . . . . . . . . . . . . . . . 14

About the remote control signal . . . 15

Changing the frequency of remote control signal

. 15

Using as a wired remote control . . . 16

Using as a simple PC mouse & keyboard

Power on/off . . . . . . . . . . . . . . 17

Turning on the power . . . . . . . . . . . 17

Turning off the power . . . . . . . . . . . 17

Operating . . . . . . . . . . . . . . . . 18

Adjusting the volume. . . . . . . . . . . . 18

Temporarily muting the sound. . . . . 18

Selecting an input signal. . . . . . . . . 18

Searching an input signal . . . . . . . . 19

Selecting an aspect ratio. . . . . . . . . 19

Adjusting the zoom and focus. . . . . 20

Adjusting the lens shift . . . . . . . . . . 20

Using the automatic adjustment feature

. . 20

Adjusting the position . . . . . . . . . . . 21

Correcting the keystone distortions

. . 21

Using the magnify feature. . . . . . . . 22

Freezing the screen . . . . . . . . . . . . 22

Temporarily blanking the screen . . . 23

Using the menu function . . . . . . . . 24

EASY MENU. . . . . . . . . . . . . . . 25

Aspect, Auto keystone execute,

(EASY MENU continued ..........26)

keystone , keystone

picture mode,

Brightness, contrAst, color, tint, shArpness,

Whisper, mirror, reset, Filter time,

lAnguAge,goto AdvAnced menu...

PICTURE Menu . . . . . . . . . . . . 27

Brightness, contrAst, gAmmA, color temp,

color, tint, shArpness, Active iris, mymemory

IMAGE Menu . . . . . . . . . . . . . . 28

Aspect, over scAn, v position, h position,

h phAse, h size, Auto Adjust execute

INPUT Menu . . . . . . . . . . . . . . 32

progressive, video nr, 3d-ycs,

color spAce, component, video FormAt,

hdmi, FrAme lock, rgB in, resolution

SETUP Menu . . . . . . . . . . . . . . 36

Auto keystone

execute, keystone

keystone

,Whisper, mirror

AUDIO Menu . . . . . . . . . . . . . . 38

volume, treBle, BAss, srs WoW,

speAker, Audio, hdmi Audio

SCREEN Menu . . . . . . . . . . . . . 39

lAnguAge, menu position, BlAnk,

stArt up, myscreen, myscreen lock,

messAge, source nAme

OPTION Menu . . . . . . . . . . . . . 43

Auto seArch, Auto keystone

Auto on, Auto oFF, lAmp time,

Filter time, myButton, service,

security

NETWORK Menu . . . . . . . . . . . 56

setup, projector nAme,

-shot,

PJ1173ViewSonic 3

Contents

inFormAtion, service

Main functions . . . . . . . . . . . . 61

Conguring and controlling via a web

browser......................61

e-SHOT (Still image Transfer) Display

Equipment connection and

network setting . . . . . . . . . . . 62

Required equipment preparation . . 62

Manual network connection setting. 63

Equipments connection . . . . . . . . . . . 63

Network settings ...............63

“Internet Option” setting .........66

Check connection ..............67

Management with Web browser

software . . . . . . . . . . . . . . . . . 68

Conguring and controlling the

projector via a web browser . . . . . . 69

Logon .....................71

Network Information ..........72

Network Settings .............73

Port Settings . . . . . . . . . . . . . . . . 75

Mail Settings ................76

Alert Settings. . . . . . . . . . . . . . . . 77

Schedule Settings . . . . . . . . . . . . 79

Date/Time Settings . . . . . . . . . . . 81

Security Settings . . . . . . . . . . . . . 83

Projector Control . . . . . . . . . . . . . 85

Projector Status. . . . . . . . . . . . . . 88

Network Restart..............89

Logoff .....................89

E-mail Alerts ..................90

Projector Management using SNMP. 92

Event Scheduling . . . . . . . . . . . . . . 93

e-SHOT (Still Image Transfer) Display

. 96

Command Control via the Network. 98

Maintenance . . . . . . . . . . . . . 103

Lamp.......................103

Air lter .....................105

Internal clock battery...........107

Othercare...................108

Troubleshooting . . . . . . . . . . 109

Related messages . . . . . . . . . . . . 109

Regarding the indicator lamps . . . 110

Phenomena that may be easy

to be mistaken for machine defects

. 112

Warranty and after-service. . 115

Specications ............115

PJ1173ViewSonic 4

Projector features / Preparations

• Keep the original packing materials for future reshipment. Be sure

to use the original packing materials when moving the projector. Use special

caution for the lens.

NOTE

Projector features

This projector is used to project various picture signals onto a screen. This

projector requires only a minimal amount of space for installation and can produce

a large projected image from even a short distance.

Preparations

Contents of package

Please see the “Contents of package” in the “Quick Start Guide (concise)” which

is a book. Your projector should come with the items shown there. Contact

immediately ViewSonic if anything is missing.

Fastening the lens cover

To avoid losing the lens cover, please fasten the lens cover to the projector using

the included strap.

1. Fix the strap to the strap hole of the lens

cover.

2. Put one side of the strap into the groove on

the rivet.

3. Push the rivet into the rivet hole.

Strap hole

Rivet hole

Bottom

PJ1173ViewSonic 5

Part names

Projector

(1) Speakers (x 4)

(2) Focus ring

(3) Zoom ring

(4) Lamp cover

The lamp unit is inside.

(5) Lens shift cover

(6) Horizontal lens shift dial

(7) Vertical lens shift dial

(8) Front cover

(9) Lens

(10) Lens cover

(11) Remote sensors (x 3)

(12) Elevator feet (x 2)

(13) Elevator knobs (x 2)

(14) Filter cover

The air lter and intake vent are

inside.

(15) Exhaust vents

(16) Intake vents

(17) Rivet hole

(18) Handle

(19) Battery cover

(20) Control panel

(21) Rear panel

►HOT! : Do not touch around the lamp cover and the exhaust

vents during use or just after use, since it is too hot.

►Do not look into the lens or vents while the lamp is on, since the strong light is

not good for your eyes.

►Do not grab the front cover to hold the projector up, since the projector may

drop down.

►Do not handle the elevator knobs without holding the projector, since the

projector may drop down.

WARNING

►Maintain normal ventilation to prevent the projector from

heating up. Do not cover, block or plug up the vents. Do not place anything that

can stick or be sucked to the vents, around the intake vents. Clean the air lter

periodically.

CAUTION

(2) (3)

(1)

(8)

(15)

(12)

(10) (9) (11) (12) (13)

(14)

(11)

(1)

(20)

(4)

HOT!

(7)

(6)

(5)

(12)

(13)

(17)

(19)

(16)

(20)

(11)

(1)

(21)

(18)

Autres manuels pour PJ1173 - XGA LCD Projector

Ce manuel convient aux modèles suivants

Table des matières

Autres manuels ViewSonic Projecteur

ViewSonic

ViewSonic LS7 Series Manuel utilisateur

ViewSonic

ViewSonic PJL9371 Mode d’emploi

ViewSonic

ViewSonic PJ3589 Manuel utilisateur

ViewSonic

ViewSonic PJD6210 Manuel utilisateur

ViewSonic

ViewSonic PJ678 Manuel utilisateur

ViewSonic

ViewSonic PJD7383i Manuel utilisateur

ViewSonic

ViewSonic PJD6553w Manuel utilisateur

ViewSonic

ViewSonic VS10872 Guide de démarrage rapide

ViewSonic

ViewSonic PX706HD Manuel utilisateur

ViewSonic

ViewSonic PJD6221 - 2700 Lumens XGA DLP Projector Manuel utilisateur

ViewSonic

ViewSonic PJD5123p Manuel utilisateur

ViewSonic

ViewSonic PJD8653ws Manuel utilisateur

ViewSonic

ViewSonic PJ650 Manuel utilisateur

ViewSonic

ViewSonic PJD6381 - 2500 Lumens XGA DLP Ultra Short-Throw... Manuel utilisateur

ViewSonic

ViewSonic PJL7211 Manuel utilisateur

ViewSonic

ViewSonic PJ402D Manuel utilisateur

ViewSonic

ViewSonic PJD6210-WH Manuel utilisateur

ViewSonic

ViewSonic PJD5152 Manuel utilisateur

ViewSonic

ViewSonic ViewDock PJ258D Manuel utilisateur

ViewSonic

ViewSonic PRO8450W VS13646 Manuel utilisateur

ViewSonic

ViewSonic PJ406D Manuel utilisateur

ViewSonic

ViewSonic PFJ62 Manuel utilisateur

ViewSonic

ViewSonic PJD6531w Manuel utilisateur

ViewSonic

ViewSonic PJ750-2 Manuel utilisateur

Manuels Projecteur populaires d'autres marques

iEmmet

iEmmet MP-312 Manuel utilisateur

Epson

Epson VS400 Manuel utilisateur

Sony

Sony VPL-HS10 Marketing Specifications & Features Manuel utilisateur

Sony

Sony VPL-HW65ES Manuel de service

Toshiba

Toshiba TLP-791U Manuel utilisateur

Philips

Philips LC1341 Guide de référence

Panasonic

Panasonic PTL735NTU - LCD PROJECTOR-NETWORK IB Manuel utilisateur

NEC

NEC NP600S EDU Manuel utilisateur

BenQ

BenQ SH753P Manuel utilisateur

Eiki

Eiki EK-623U series Manuel utilisateur

Epson

Epson PowerLite Pro Cinema 6020UB Manuel utilisateur

Epson

Epson PowerLite Home Cinema 705HD Manuel utilisateur

Christie

Christie LHD700 Manuel utilisateur

Navitar

Navitar FX Manuel utilisateur

InFocus

InFocus LitePro 560 Manuel utilisateur

Sony

Sony SRX-R815P Manuel utilisateur

Vivitar

Vivitar DP1500 X Manuel utilisateur

Acer

Acer C20 Series Manuel utilisateur