ViewSonic ViewPanel VG151 Manuel utilisateur

User Guide

Guide de l’utilisateur

Bedienungsanleitung

Guía del usuario

Guida dell’utente

Guia do usuário

Användarhandbok

Käyttöopas

Руководство пользователя

Podręcznik użytkownika

With Plug & Play



Full 15.0" Diagonal Viewable Screen

VG151 ViewPanel®

ViewSonic VG151 1

Contents

Product Registration..............................................................2

For Your Records ..................................................................2

Getting Started

Package Contents .................................................................3

Precautions ...........................................................................3

Quick Installation ...................................................................4

Using the ViewPanel

Setting the Timing Mode .......................................................5

OSD and Power Button Lock Modes.....................................5

Adjusting the Screen Image ..................................................6

Other Information

Specifications ......................................................................13

Troubleshooting...................................................................14

Customer Support ...............................................................15

Cleaning the ViewPanel ......................................................16

Limited Warranty .................................................................17

Appendix

Safety Guidelines ................................................................18

Compliance Information ......................................................19

CE Conformity ..................................................................... 19

2 ViewSonic VG151

Macintosh and Power Macintosh are registered trademarks of Apple Computer, Inc.

Microsoft, Windows, Windows NT, and the Windows logo are registered trademarks of Microsoft

Corporation in the United States and other countries.

ViewSonic, the three birds logo, OnView, ViewMatch, and ViewMeter are registered trademarks of

ViewSonic Corporation.

VESA is a registered trademark of the Video Electronics Standards Association. DPMS and DDC

are trademarks of VESA.

ENERGY STAR®is a registered trademark of the U.S. Environmental Protection Agency (EPA).

As an ENERGY STAR®partner, ViewSonic Corporation has determined that this product meets the

ENERGY STAR®guidelines for energy efficiency.

Disclaimer: ViewSonic Corporation shall not be liable for technical or editorial errors or omissions

contained herein; nor for incidental or consequential damages resulting from furnishing this

material, or the performance or use this product.

In the interest of continuing product improvement, ViewSonic Corporation reserves the right to

change product specifications without notice. Information in this document may change without

notice.

No part of this document may be copied, reproduced, or transmitted by any means, for any purpose

without prior written permission from ViewSonic Corporation.

Product Registration

To meet your future needs, and to receive any additional product information as it becomes

available, please register your product on the Internet at: www.viewsonic.com. The ViewSonic

Wizard CD-ROM also provides an opportunity for you to print the registration form, which you may

mail or fax to ViewSonic.

Product disposal at end of product life

ViewSonic is concerned about the preservation of our environment. Please dispose of this product

properly at the end of its useful life. Your local waste disposal company may provide information

about proper disposal.

For Your Records

Product Name:

Model Number:

Document Number:

Serial Number:

Purchase Date:

ViewSonic VG151

VLCDS21587-2

VG151-2_UG_146 (REV.1B)

______________

ViewSonic VG151 3

Getting Started

Congratulations on your purchase of a VG151 color ViewPanel®.

Important! Save the original box and all packing material for future shipping

needs.

NOTE: The word “Windows” in this user guide refers to the following Microsoft

operating systems: Windows ‘95, Windows NT, Windows ‘98, Windows 2000

and Windows ME (Millennium).

Package Contents

Yo u r VG151 package includes:

•VG151 ViewPanel with video cables

• Quick Start Guide

• U.S. power cord

• Schuko power cord

• Standard VGA video cable

• DVI video cable (to be used with computers with DVI video cards)

• AC/DC Adapter

• ViewSonic Wizard CD-ROM (including user guide PDF file and INF/ICM

display optimization files)

IMPORTANT: The supplied INF file assures compatibility with Windows

operating systems, and the ICM file (Integrated Color Management) assures

accurate on-screen colors.

Precautions

• For best viewing conditions sit at least 18"

from the ViewPanel.

• AVOID TOUCHING THE SCREEN WITH

YOUR FINGERS. Oils from the skin are

difficult to remove.

• NEVER REMOVE THE REAR COVER. The

ViewPanel contains high-voltage parts. You

may suffer serious injury if you touch these

parts.

• Avoid exposing the ViewPanel to direct

sunlight or another heat source. The

ViewPanel should be facing away from direct

sunlight to reduce glare.

• Always handle your ViewPanel with care

when moving it.

• Place your ViewPanel in a well ventilated

area. Do not place anything on the ViewPanel

that prevents adequate dissipation of heat.

• Ensure the area around the ViewPanel is clean

and free of moisture.

• Do not place heavy objects on the ViewPanel,

video cable, or power cord.

• If smoke, abnormal noise, or strange odor is

present, immediately switch the ViewPanel

off and call your dealer or ViewSonic. It is

dangerous to continue using the ViewPanel.

4 ViewSonic VG151

Quick Installation

1 Connect video cable

Make sure both the ViewPanel®and

computer are powered OFF.

• Remove the lower back cover and lift up the

upper back cover.

• Connect the video cable to the computer then

to the ViewPanel. Both analog and digital

ports are available on the back of the

ViewPanel for your convenience.

Macintosh users: Models older than G3

require a Macintosh adapter. Attach the

adapter to the computer and plug the video

cable into the adapter.

To order a ViewSonic®Macintosh adapter,

contact ViewSonic Customer Support.

2 Connect power cord and AC/DC

adapter

Connect the power cord and AC/DC adapter

from the ViewPanel to a properly grounded

AC outlet.

3 Power-ON ViewPanel and computer

Power-ON the ViewPanel, then power-ON

the computer. This sequence (ViewPanel

before computer) is very important.

NOTE: Windows 95, 98 or 2000 users may

receive a message asking them to install the

VG151 INF file.

4 Install display optimization files (INF

and ICM files)

(1) Insert the ViewSonic Wizard CD-ROM

into your computer’s CD-ROM drive.

4 Install display optimization files

(cont.)

NOTE: If your computer does not have a

CD-ROM drive, contact Customer Support.

(2) Wait for the CD-ROM to auto-start.

NOTE: If the CD-ROM does not auto-start:

double-click on the CD-ROM icon in the

Windows Explorer, then double-click on

install.exe.

(3) Follow the on-screen instructions.

5 Windows users: Set the timing mode

(resolution and refresh rate)

Example: 1024 X 768 @ 60 Hz.

For instructions on changing the resolution

and refresh rate, see the user guide for your

computer's graphics card.

Installation is complete. Enjoy your new

VG151 ViewPanel.

To be best prepared for any future customer

service needs: print this user guide and write

the serial number in "For Your Records" on

page 2. (See back of ViewPanel.)

To register your product go online to

www.viewsonic.com.

The ViewSonic Wizard CD-ROM also

provides an opportunity for you to print the

registration form which you may mail or fax to

ViewSonic.

Remove two

back covers

AC outlet

(wall socket)

DC Adapter

Power cord

Video cable

to computer

ViewSonic VG151 5

Using the ViewPanel

Setting the Timing Mode

Setting the timing mode is important for maximizing the quality of the screen image

and minimizing eye strain. The timing mode consists of the resolution (example

1024 x 768) and refresh rate (or vertical frequency--example 60 Hz). After setting

the timing mode, use the OnView® controls (pages 6 – 10) to adjust the screen image.

The recommended timing mode for this ViewPanel is: VESA®

1024 x 768 @ 60 Hz

To set the Timing Mode:

1Set the resolution: Right-click on the Windows®desktop > Properties >

Settings > Desktop Area or Screen Area for Windows 98 and newer > set the

resolution.

2Set the refresh rate: See your graphic card's user guide for instructions.

WARNING: Do not set the graphics card in your computer to exceed the maximum

refresh rate of 75Hz; doing so may result in permanent damage to your ViewPanel.

OSD and Power Button Lock Modes

OSD Lock This mode locks all current control settings and prevents access to the

control menus until this mode is unlocked.

• To lock all OSD menus, press and hold both the [1] button and the



(up-arrow)

button for 10 seconds. While in this mode, when any button is pushed, OSD

Locked will display for A few seconds.

• To unlock the OSD menus, press and hold both the [1] button and the



(up-

arrow) button for 10 seconds.

Power Button Lock This mode locks the power of the ViewPanel in the ON

position.

• To lock the power of the ViewPanel ON, press and hold both the [1] button and

the



(down-arrow) button for 10 seconds. While in this mode, when the power

button is pushed, Power Button Locked will display for a few seconds.

• NOTE: After a power failure, whether or not the Power Button Lock mode was

active, your ViewPanel’s power will automatically turn on when power is

restored.

• To unlock this mode, press and hold both the [1] button and the



(down arrow)

again for 10 seconds.

6 ViewSonic VG151

Adjusting the Screen Image

Beginning with the Main Menu shown below, you will use the buttons on the

front control panel to display and adjust the OnView®controls which display on

the screen. The OnView controls are explained in the five steps at the top of the

next page and are further explained on pages 8-12.

Main Menu

with OnView controls.

The status line at the bottom

of the menu shows what to

do next: Button [1] Exits the

menu. Button [2] Selects the

highlighted control.

Button [1] displays the Main

Menu; also saves changes

and exits the Main Menu.

Button [2] displays the

control screen for a

selected control. Also used

to toggle between a pair of

controls on some screens.

Scroll Up/Down

menu options.

Power Light Power ON/OFF

Front

Control

Panel

ViewSonic VG151 7

Do the following to adjust the screen image:

1To display the Main Menu, press button [1].

2To highlight a control you want to adjust, press





to scroll up or down the

Main Menu.

3To select the highlighted control, press button [2]. A control screen appears like

the one shown below for the selected control.

4To adjust the selected control, press the up



or down



buttons on the Front

Control Panel of the monitor.

5To save the adjustments and exit the menu, press button [1] twice.

The following tips may help you optimize your display:

• Adjust your computer's graphic card so that it outputs a video signal 1024 x 768

@ 60Hz to the VG151. (Look for instructions on "changing the refresh rate" in

your graphic card's user guide.)

• If necessary, make small adjustments using H POSITION and V POSITION until

the screen image is completely visible. (The black border around the edge of the

screen should barely touch the illuminated "active area" of the ViewPanel®.)

• Adjust FINE TUNE so that the screen image looks focused, crisp, and sharp.

NOTE: Auto Image Adjust and Manual Image adjust are inactive for digital mode.

NOTE: All OnView menus and adjustment screens disappear automatically after

about 15 seconds. This time period is adjustable through the Setup menu and the

OSD timeout control described on page 11.

8 ViewSonic VG151

Main Menu Controls

The menu items shown below can be adjusted by using the up



and down



buttons.

Control Explanation

AUTO IMAGE ADJUST automatically sizes, centers, auto-

contrasts and fine tunes the video signal to eliminate waviness

and distortion.

Press the [2] button to obtain a sharper image.

NOTE: Auto Image Adjust works with most video cards. If this

function does not work on your ViewPanel®, then lower the

video refresh rate to 60 Hz and set the resolution to its preset

value.

CONTRAST/BRIGHTNESS Contrast adjusts the difference

between the image background (black level) and the foreground

(white level). Brightness adjusts background black level of the

screen image. Press button [2] to toggle between Contrast and

Brightness.

INPUT ANALOG switches between two ports: one for a digital

input signal and one for an analog signal.

Shortcut: From the Windows desktop, press button [2] to bypass

the Main Menu and switch ports.

On-screen display will show Input Analog or Input Digital,

depending upon the currently selected input source.

ViewSonic VG151 9

COLOR ADJUST provides several color options: preset color

temperatures and RGB which allows you to adjust red (R), green

(G), and blue (B) individually.

9300K – for a cooler, more blue image.

6500K – for a warmer, more red image.

User Color – Individual adjustments for red, green, and blue.

1To select color (R, G or B) press button [2].

2To adjust selected color, press





When you are finished making all color adjustments, press

button [1] twice.

INFORMATION displays the timing mode (video signal input)

coming from the graphics card in your computer, the LCD

model number, the serial number, and the ViewSonic website

URL. See your graphic card’s user guide for instructions on

changing the resolution and refresh rate (vertical frequency).

NOTE: VESA 1280 x 1024 @ 60Hz (recommended) means that

the resolution is 1280 x 1024 and the refresh rate is 60 Hertz.

Control Explanation

Autres manuels pour ViewPanel VG151

Ce manuel convient aux modèles suivants

Table des matières

Autres manuels ViewSonic Moniteur

ViewSonic

ViewSonic VA730M Manuel utilisateur

ViewSonic

ViewSonic XG2703-GS Manuel utilisateur

ViewSonic

ViewSonic VG2030m-1 Manuel utilisateur

ViewSonic

ViewSonic VG810 Manuel utilisateur

ViewSonic

ViewSonic VX2250wm-LED Manuel utilisateur

ViewSonic

ViewSonic N4200W - NextVision - 42" LCD Flat Panel... Manuel utilisateur

ViewSonic

ViewSonic VG921m-2W Manuel utilisateur

ViewSonic

ViewSonic G800 - 20" CRT Display Manuel utilisateur

ViewSonic

ViewSonic VA2756-4K-MHD Manuel utilisateur

ViewSonic

ViewSonic VX3276-2K-MHD-7 Manuel utilisateur

ViewSonic

ViewSonic Optiquest Q9b Manuel utilisateur

ViewSonic

ViewSonic VX2781-4K-PRO Manuel utilisateur

ViewSonic

ViewSonic N1900w Manuel utilisateur

ViewSonic

ViewSonic VX2770Smh-LED Manuel utilisateur

ViewSonic

ViewSonic SD-T225 Manuel utilisateur

ViewSonic

ViewSonic PT775 - 17" CRT Display Manuel utilisateur

ViewSonic

ViewSonic VX2640W - 26" LCD Monitor Manuel utilisateur

ViewSonic

ViewSonic N1300 Manuel utilisateur

ViewSonic

ViewSonic ViewPanel VG150 Manuel utilisateur

ViewSonic

ViewSonic VA2409-mh Manuel utilisateur

ViewSonic

ViewSonic CD4220 - 42" LCD Flat Panel Display Manuel utilisateur

ViewSonic

ViewSonic PerfectSound 29GA Manuel utilisateur

ViewSonic

ViewSonic VA903b-3 VS11372 Manuel utilisateur

ViewSonic

ViewSonic VG511s Manuel utilisateur

Manuels Moniteur populaires d'autres marques

Linear Acoustic

Linear Acoustic LQ-1000 Manuel utilisateur

AOC

AOC I2579V Manuel utilisateur

Gateway

Gateway FPD1520 Manuel utilisateur

Furuno

Furuno Mu 120c Manuel utilisateur

Asus

Asus VB171D - 17" LCD Monitor Manuel utilisateur

Dell

Dell S2230MX Instructions d'utilisation

Philips

Philips 107C64 Manuel utilisateur

Dell

Dell S2409WFP Manuel utilisateur

EverFocus

EverFocus EN-7517E Manuel utilisateur

Panasonic

Panasonic TH152UX1 - 152" PLASMA TV Manuel utilisateur

Dell

Dell Precision 7680 Mode d’emploi

LG 50PM1M - - 50" Plasma Panel Manuel utilisateur

Bosch

Bosch DDU 9 Manuel utilisateur

Acer

Acer A231HL Manuel utilisateur

Philips

Philips 86BDL4152T Manuel utilisateur

NEC

NEC AccuSync LCD5V Manuel utilisateur

Emay

Emay SleepO2 Manuel utilisateur

IBM

IBM 6360 Instructions d'installation