ViewSonic ViewPanel VE150 Manuel utilisateur

VE150 ViewPanel®

User’s Guide

VLCDS21458-1

with Plug and Play

15.1" Viewable Diagonal

ViewSonicVE150

For Your Records

The serial number of this product is on the back of theViewPanel.Write the

serial number of this unit in the space below and keep this booklet as a

permanent record of your purchase to aid in identification in the event of theft

or loss. Model Name: ViewSonicVE150

ModelNumber: VLCDS21458-1

Serial Number: __________________

Purchase Date: ___________________

Power Cord Safety Guidelines

Caution : Use a power cable that is properly grounded. Always use the AC cords listed

below for each area : USA...........................UL

Canada......................CSA

Germany....................VDE

Switzerland................SEV

Britain .........................BASEC/BS

Japan.........................ElectricAppliance Control Act

In other areas, use AC cord which meets local safety standards.

needs.

Electronic Warranty Registration

Macintosh and Power Macintosh are registered trademarks of Apple Computer, Inc.

Microsoft, Windows, Windows NT, and the Windows Logo are registered trademarks of Microsoft

Corporation in the United States and other countries.

ViewSonic, ViewMeter, and ViewMatch are registered trademarks of ViewSonic Corporation.

VESA is a registered trademark of theVideo Electronics StandardsAssociation (VESA). DPMS is a

trademark ofVESA.

ENERGY STAR is a registered trademark of the U.S. Environmental ProtectionAgency (EPA).

Disclaimer: ViewSonic Corporation shall not be liable for technical or editorial errors or omissions

contained herein; nor for incidental or consequential damages resulting from furnishing this

material, or the performance or use of this product.

In the interest of continuing product improvement,ViewSonic Corporation reserves the right to

change product specifications without notice. Information in this document may change without

notice.

No part of this document may be copied, reproduced, or transmitted by any means, for any purpose

without prior written permission from ViewSonic Corporation.

As an ENERGY STAR®partner,ViewSonic Corporation has determined that this product meets the

ENERGY STAR®guidelines for energy efficiency.

ViewSonicVE150

Important Safety Instructions

1Readtheseinstructionsthoroughly.

2Followall warningand instructionsmarkedonthis product.

3Unplug the productfrom the wall outletbefore cleaning.See the

Cleaning theViewPanel

onpage12.

4Do not use the product near water.Never spill liquid of any kind on the product.

5Do not place the product on an unstable cart, stand, or table.Doing so may cause the

product to fall, which can seriously damage it.

6Slotsand openings inthe cabinet areprovidedforventilation.Toensure reliable

operation, never block these ventilation slots by placing the product on a bed, sofa, rug,

or similar surface.This product should never be placed near or over a radiator or heat

7Makesure the powersource complies withthe powerrecommendationprinted on the

back of the product.If you are not sure of the type of power provided by the wall socket,

consultyourdealer or local powercompany.

8Do not place any object on the power cord.Do not place this product where people could

walk on the power cord.

9If you use an extension cord with this product, make sure thetotal ampere rating of the

product(s)plugged into the extensioncorddoes not exceedthe ampere ratingof the

extensioncord.

10 Never push objects of any kind through the ventilation slots at the back of the product.To

do so could risk fire or electric shock.

11 Do not attempt to service this product yourself.Opening or removing covers may expose

you to dangerous voltage that could cause fire or electric shock.Refer all servicing

needsto authorizedservice personnel.

12 Unplugthis product fromthe wall outlet andcontact authorizedservicepersonnel under

thefollowingconditions:

a) When the power cord or plug is damaged or frayed.

b) Ifa liquid hasbeen spilledinto or on the product, including rain.

c) If the productdoes not operate normally when operatinginstructions are followed.

Only adjust those controls that are covered by the operating instructions, since

improperadjustment of othercontrols mayresultin damage andwill often require

extensiveworkbya qualified technician torestore the productto normal operation.

d) Ifthe product has been dropped or thecabinet has beendamaged.

e) Ifthe product exhibitsa distinct change in performance,indicatinga need for

service.

ViewSonicVE150

FCC Information

This equipment has been tested and found to comply with the limits for a Class B digital

device, pursuant to part 15 of the FCC Rules.These limits are designed to provide

reasonableprotection against harmful interferencein aresidential installation.This

equipmentgenerates,uses,andcan radiate radiofrequency energy, and ifnot installed and

usedin accordance with the instructions,maycause harmfulinterferenceto radio

communications.However, there isno guarantee that interferencewill not occur in a

particular installation.If this equipmentdoes cause unacceptableinterferenceto radio or

televisionreception, which canbe determinedbyturningthe equipment offand on, theuser

is encouraged to try to correct the interference by one or more of the following measures:

●Reorient orrelocate the receiving antenna.

●Increasethe separation between the equipment andreceiver.

●Connectthe equipmentinto anoutlet ona circuitdifferentfrom that to which the

receiverisconnected.

●Consultyourdealeror an experiencedradio/TV technician for help.

FCC Warning:

To assure continued FCC compliance,the user must use the provided

grounded power supply cord and the shielded video interface cable with

bonded ferrite cores.Also,any unauthorized changes or modifications to this

ViewPanel would void the user’s authority to operate this device.

Department of Industry Canada (IC) Compliance Notice

This digital apparatus does not exceed the Class B limits for radio noise emissions from

digitalapparatussetout in theRadio InterferenceRegulations of the CanadianDepartment

ofCommunications.

DOC avis de conformation

Cetappareil est bienconformeà la directivecommunautaireNo 82/499/CEE.

CE Certification

Thisdevicecomplies with the requirementsof the EECdirective89/336/EEC

withregard to "Electromagnetic compatibility."

4GettingStarted

ViewSonicVE150

CONTENTS

Power Cord Safety Guidelines . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1

Important Safety Instructions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2

FCC Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3

Getting Started

Package Contents . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5

Precautions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5

Quick Installation* . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6

Operation

Adjusting the Screen Image . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7

On-Screen Controls . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8

Other Information

Specifications. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10

Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11

Cleaning the ViewPanel. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12

Limited Warranty . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13

Customer Support . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . back cover

*To meet your future needs, and to receive any additional product information as it becomes available,

please register your monitor's warranty on the Internet at: http://www.viewsonic.com.

ViewSonicVE150

GettingStarted

Congratulations on your purchase of an ViewSonic VE150 color ViewPanel®!

Save the original box and all packing material for your future shipping needs.

The word "Windows®" in this user guide refers to the following Microsoft®

operating systems: Windows '95, Windows '98, Windows NT®(4.0).

Package Contents

Your ViewSonic®VE150 package includes the following:

•ViewSonic VE150 ViewPanel

• Video cable (15 pin mini D-sub connector)

• DC adapter

• Power cord

• User’s guide

• INF and ICM installation files on CD-ROM

IMPORTANT: The supplied INF file assures compatibility with Windows

operating systems, and the ICM (Image Color Matching) file ensures accurate

on-screen colors. ViewSonic recommends that you install both files: insert the

CD-ROM into your system, wait for it to auto-install, select “Monitor

Drivers,” and follow the on-screen instructions.

• Sit at least 18" from the ViewPanel.

• DO NOT APPLY PRESSURE TO THE SCREEN. The LCD screen is

very delicate.

• DO NOT TOUCH THE SCREEN DIRECTLY WITH YOUR

FINGERS. You may damage the screen, and oil from your skin is

difficult to remove.

• Avoid exposing the ViewPanel to direct sunlight or other heat source.

The ViewPanel should be facing away from direct sunlight to reduce

glare.

• Choose a well ventilated area to position your ViewPanel to allow

adequate dissipation of heat. Do not place anything on top of the

ViewPanel.

• Ensure the area around the ViewPanel is clean and moisture-free.

• If smoke, abnormal noise, or strange odor is present, immediately

switch the ViewPanel off and call your dealer. It is dangerous to

continue using the ViewPanel.

• Never remove the rear cover. The display unit contains high-voltage

parts. You may suffer electric shock if you touch these parts.

• Always handle your ViewPanel with care when moving it.

Precautions

Getting Started

6GettingStarted

ViewSonicVE150

Quick Installation

1 Connectvideocable

Make sureboththeViewPanel®and

computerarepoweredOFF.Connect the

video cable to the computer, then to

theViewPanel.

Macintosh

users:

Connect a

Macintosh adapter (part No.VMAC-1)

to the video cable, then to the

ViewPanel.To order an adapter,

contactViewSonic (see the back cover

ofthisguide).You will need to provide

yourViewPanel's serial number.

2 Connect power adpater and cables

Connect the DC Adapter to the

ViewPanel, then to the power cord.

Connect the power cord to a properly

groundedACoutlet.

3 Power-oncomputer andViewPanel

PowerON the computer, then power

ON theViewPanel.

NOTE: At this pointWindows®

98 users

will receive a message askingthem to

install theVE150’s INF file.Insert the

enclosed CD-ROM diskette and follow

the on-screen instructions.

4 IMPORTANT:Initial screen image

adjustments

A. If there is no screen image and you

see theOutside Range Limits

message, check to make sure your

system is set toone of the factory

preset timing modes (see page 10.)

• If you also have a CRT monitor,

connect ittoyourcomputer and

setthe signal timing.

•

Windows

95 & 98 users:

If you

4A. (continued)

do not have a CRT monitor,you

may reboot your system in "Safe

Mode" to display a supported

timing.See yourWindows

documentation for instructions.

B. For the best image quality, set the

timing (resolution and refresh rate)

of your graphics card to:

1024x768@60Hz.

C. If you see vertical bars after

powering on theViewPanel:

(1) From theWindows 95 or 98

STARTmenu,selectSHUTDOWN

(but donot click "Yes").

(2) Use theVE150 controls to

adjust the CLOCK control until

thevertical bars vanish.(See

page8)

(3) Adjust CLOCK PHASE until the

horizontal bars ("line noise")

are minimized.(See page 9)

(4) Repeat steps (2) and (3) to

optimizethesharpnessofthe

screenimage.

(5) Select"No" toclosetheWindows

SHUTDOWNscreen.

NOTE:If you see theCheck Signal

Cable message, check to see that

the video cable and power cable are

both securely attached.

Installation is complete!

EnjoyyournewcolorVE150ViewPanel!

Write the serial number (see back ofthe

ViewPanel) in

"ForyourRecords"

onpage

1 of this users guide and register the

warrantyof yourViewPanel on theInternet

at: http//:www.viewsonic.com

DC Adapter Video cable

Power

cord

ViewSonicVE150

Operation

Adjusting the Screen Image

With your ViewPanel powered ON, follow the numbered steps in sequence as

shown below.

Power light:

Green =On

Amber =Power

Saving

Mode

Press [<] or [>] to

adjust the control

you selected.

Press [<] or [>] to

highlight the control

you want to adjust.

To save your

adjustments and

exit all OSD screens,

press the MENU

button.

Press the ENTER button

to display the adjustment

screen for the control you

want to adjust.

➌

➎

➋

➍

➊

Press the

MENU button

to display the

Main Menu.

To save your

adjustments and

return to the Main

Menu, press the

ENTER button.

Power

ON/

OFF

button

or:

See the next page for information about each on-screen control.

IMPORTANT: The supplied INF file assures compatibility with Windows

operating systems, and the ICM (Image Color Matching) file ensures accurate

on-screen colors. ViewSonic®recommends that you install both files: insert

the CD-ROM into your system, wait for it to auto-install, select “Monitor

Drivers,” and follow the on-screen instructions.

ViewSonic VE150

Operation

Contrast adjusts the contrast

between the background (black

level) and the foreground (white

level) of the screen image.

[>] Increases contrast

[<] Decreases contrast

Brightness adjusts the

background black level of the

screen image.

[>] Increases brightness

[<] Decreases brightness

Shortcut

: Before you display the

Main Menu, press [>] or [<] to

display the Brightness

adjustment screen.

H Position (Horizontal Position)

moves

the screen image to the

left or right.

[>] Moves the screen image right

[<] Moves the screen image left

V Position (Vertical Position)

moves the screen image up or

down.

[>] Moves the screen image up

[<] Moves the screen image down

Clock adjusts the horizontal

size (width) of the screen image,

and mimimizes the vertical bars

that can be present during initial

installation.

[>] Increases

the width of the

screen image

[<] Decreases the width of the

screen image

"Contrast" Adjustment

Screen

(example)

MAIN MENU with

"Contrast" highlighted.

To display the Contrast

adjustment screen, press

the ENTER button. (See

below.)

On-Screen Controls

ViewSonicVE150

Operation

Clock Phase minimizes narrow

horizontal lines ("horizontal

noise") and sharpens displayed

characters of text.

[>] or [<] to adjust

OSD Time allows you to select

the length of time the Main

Menu or adjustment screen

OSD (On Screen Display) is

displayed on screen.

[>] Increases

the OSD display

time.

[<] Decreases the OSD display

time.

ViewMatch®Color provides

two preset color temperature

options and a user-defined

option.

[>] or [<] to highlight an option.

9300K is slightly bluish white,

ideal for use under fluorescent

lights.

6500K (factory default) is warm-

white, good for displaying a video

image.

User allows you to adjust the

intensities of R (red), G (green),

and B (blue) individually.

[>] or [<] to adjust each color

OSD Position allows you to

select where the Main Menu or

adjustment screen OSD (On

Screen Display) will display.

H Position (Horizontal Position)

[>] moves the OSD to the right

[<] moves the OSD to the left

V Position (Vertical Position)

[>] moves the OSD up

[<] moves the OSD down

Language allows you to

choose from one of five

languages for the Main Menu

and adjustment screens:

English, German, French,

Spanish, and Italian.

[>] or [<] to select a language.

Mode Recall recalls the

factory default settings for most

controls.

With "YES" selected, the press

ENTER button to the recall

factory default setting for all

controls (except User Color).

If you change your mind and

would not like to recall factory

default settings, highlight "NO"

and press the ENTER button.

ViewMeter®displays the signal

timing (resolution and refresh

rate) coming from the video card

in your computer.

For example,1024x768 / 60Hz

means 1024x768 resolution at a

refresh rate (vertical frequency)

of 60 Hertz.

NOTE: If the signal timing

coming from your video card is

not one of the factory presets, it

will not be recalled the next time

you power-on the ViewPanel.

Tip: For the best results, adjust

Clock andClock Phase

together:

1From theWindows®95 or 98

STARTmenu,selectSHUTDOWN

(but donot click "Yes").

2AdjustClock until the vertical

barsvanish.

3AdjustClock Phase until the

horizontal lines ("line noise") are

minimized.

4Repeat steps 2 and 3 to

optimize the sharpness of the

screen image.

5Select "No" to close theWindows

SHUTDOWN screen.

Autres manuels pour ViewPanel VE150

Ce manuel convient aux modèles suivants

Table des matières

Autres manuels ViewSonic Moniteur

ViewSonic

ViewSonic VA2201-a Manuel utilisateur

ViewSonic

ViewSonic VX710 - 17" LCD Monitor Manuel utilisateur

ViewSonic

ViewSonic VX1622-4K Manuel utilisateur

ViewSonic

ViewSonic NextVision VPW505 Manuel utilisateur

ViewSonic

ViewSonic VX922 - 19" LCD Monitor Guide de démarrage rapide

ViewSonic

ViewSonic CDE6520 Manuel utilisateur

ViewSonic

ViewSonic E40 Manuel utilisateur

ViewSonic

ViewSonic VA2202-h Manuel utilisateur

ViewSonic

ViewSonic VA2962-hd Manuel utilisateur

ViewSonic

ViewSonic G75FB Manuel utilisateur

ViewSonic

ViewSonic CDE6501LED Manuel utilisateur

ViewSonic

ViewSonic G70fm Manuel utilisateur

ViewSonic

ViewSonic SWB8451 Manuel utilisateur

ViewSonic

ViewSonic Q72B - Optiquest - 17" LCD Monitor Manuel utilisateur

ViewSonic

ViewSonic VA2246m-LED Manuel utilisateur

ViewSonic

ViewSonic LCD Display VS11349 Manuel utilisateur

ViewSonic

ViewSonic VE175-2 Manuel utilisateur

ViewSonic

ViewSonic VG2433-LED Manuel utilisateur

ViewSonic

ViewSonic VS16340A Manuel utilisateur

ViewSonic

ViewSonic VG2428wm Manuel utilisateur

ViewSonic

ViewSonic VG800B - 18" LCD Monitor Manuel utilisateur

ViewSonic

ViewSonic VA2226W - 22" LCD Monitor Manuel utilisateur

ViewSonic

ViewSonic VG2027WM - 20" LCD Monitor Manuel utilisateur

ViewSonic

ViewSonic VG275 Manuel utilisateur

Manuels Moniteur populaires d'autres marques

Linear Acoustic

Linear Acoustic LQ-1000 Manuel utilisateur

AOC

AOC I2579V Manuel utilisateur

Gateway

Gateway FPD1520 Manuel utilisateur

Furuno

Furuno Mu 120c Manuel utilisateur

Asus

Asus VB171D - 17" LCD Monitor Manuel utilisateur

Dell

Dell S2230MX Instructions d'utilisation

Philips

Philips 107C64 Manuel utilisateur

Dell

Dell S2409WFP Manuel utilisateur

EverFocus

EverFocus EN-7517E Manuel utilisateur

Panasonic

Panasonic TH152UX1 - 152" PLASMA TV Manuel utilisateur

Dell

Dell Precision 7680 Mode d’emploi

LG 50PM1M - - 50" Plasma Panel Manuel utilisateur

Bosch

Bosch DDU 9 Manuel utilisateur

Acer

Acer A231HL Manuel utilisateur

Philips

Philips 86BDL4152T Manuel utilisateur

NEC

NEC AccuSync LCD5V Manuel utilisateur

Emay

Emay SleepO2 Manuel utilisateur

IBM

IBM 6360 Instructions d'installation