ViewSonic myViewBoard VBS100-A Manuel utilisateur
VBS100-A / VBS100-L
myViewBoard Box
User Guide
Model No. VS17677
IMPORTANT: Please read this User Guide to obtain important information on installing
and using your product in a safe manner, as well as registering your product for future
service. Warranty information contained in this User Guide will describe your limited
coverage from ViewSonic Corporation, which is also found on our web site at http://
www.viewsonic.com in English, or in specic languages using the Regional selection
box in the upper right corner of our website. “Antes de operar su equipo lea cu
idadosamente las instrucciones en este manual”
Thank you for choosing ViewSonic
As a world leading provider of visual solutions, ViewSonic is dedicated to
exceeding the world’s expectations for technological evolution, innovation,
and simplicity. At ViewSonic, we believe that our products have the
potential to make a positive impact in the world, and we are confident that
the ViewSonic product you have chosen will serve you well.
Once again, thank you for choosing ViewSonic !
i
Compliance Information
FCC Statement
This device complies with part 15 of FCC Rules. Operation is subject to the following
two conditions: (1) this device may not cause harmful interference, and (2) this
device must accept any interference received, including interference that may cause
undesired operation.
This equipment has been tested and found to comply with the limits for a Class
B digital device, pursuant to part 15 of the FCC Rules. These limits are designed
to provide reasonable protection against harmful interference in a residential
installation. This equipment generates, uses, and can radiate radio frequency
energy, and if not installed and used in accordance with the instructions, may cause
harmful interference to radio communications. However, there is no guarantee that
interference will not occur in a particular installation. If this equipment does cause
harmful interference to radio or television reception, which can be determined
by turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the
receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
You are cautioned that changes or modifications not expressly approved by the party
responsible for compliance could void your authority to operate the equipment.
Warning: Use only power supplies listed in the user instructions.
AVERTISSEMENT: Utilisez uniquement les sources d'alimentation mentionnées
dans les instructions d'utilisation.
You are cautioned that changes or modifications not expressly approved by the
responsible for compliance could void your authority to operate the equipment.
For Canada
• This Class B digital apparatus complies with Canadian ICES-3(B)/ NMB-3(B).
• Cet appareil numérique de la classe B est conforme à la norme ICES-3(B)/ NMB-
3(B). Canada.
CE Conformity for European Countries
The device complies with the EMC Directive 2014/30/EU and Low Voltage
Directive 2014/35/EU.
Following information is only for EU-member states:
The mark is in compliance with the Waste Electrical and Electronic
Equipment Directive 2012/19/EU (WEEE).
ii
The mark indicates the requirement NOT to dispose the equipment including any
spent or discarded batteries or accumulators as unsorted municipal waste, but use
the return and collection systems available.
If the batteries, accumulators and button cells included with this equipment,
display the chemical symbol Hg, Cd, or Pb, then it means that the battery
has a heavy metal content of more than 0.0005% Mercury or more than,
0.002% Cadmium, or more than 0.004% Lead.
Declaration of RoHS2 Compliance
This product has been designed and manufactured in compliance with Directive
2011/65/EU of the European Parliament and the Council on restriction of the use
of certain hazardous substances in electrical and electronic equipment (RoHS2
Directive), and is deemed to comply with the maximum concentration values issued
by the European Technical Adaptation Committee (TAC) as shown below:
Substance
Proposed Maximum
Concentration
Actual Concentration
Lead (Pb) 0.1% < 0.1%
Mercury (Hg) 0.1% < 0.1%
Cadmium (Cd) 0.01% < 0.01%
Hexavalent Chromium (Cr6+) 0.1% < 0.1%
Polybrominated biphenyls (PBB) 0.1% < 0.1%
Polybrominated diphenyl ethers
(PBDE) 0.1% < 0.1%
Certain components of products as stated above are exempted under the Annex III
of the RoHS2 Directives as noted below:
Examples of exempted components are:
1. Mercury in cold cathode fluorescent lamps and external electrode fluorescent
lamps (CCFL and EEFL) for special purposes not exceeding (per lamp):
(1) Short length (≦500 mm): maximum 3.5 mg per lamp.
(2) Medium length (＞500 mm and ≦1,500 mm): maximum 5 mg per lamp.
(3) Long length (＞1,500 mm): maximum 13 mg per lamp.
2. Lead in glass of cathode ray tubes.
3. Lead in glass of fluorescent tubes not exceeding 0.2% by weight.
4. Lead as an alloying element in aluminium containing up to 0.4% lead by weight.
5. Copper alloy containing up to 4% lead by weight.
6. Lead in high melting temperature type solders (i.e. lead-based alloys containing
85% by weight or more lead).
7. Electrical and electronic components containing lead in a glass or ceramic other
than dielectric ceramic in capacitors, e.g. piezoelectronic devices, or in a glass or
ceramic matrix compound.
iii
Contents
Compliance Information ..........................................................i
FCC Statement.................................................................................... i
CE Conformity for European Countries............................................... i
Declaration of RoHS2 Compliance......................................................ii
Copyright Information.............................................................1
For Your Records............................................................................... 1
1. PRODUCT OVERVIEW ........................................................2
Package contents............................................................................... 2
Front view........................................................................................... 3
Rear View........................................................................................... 4
2. Getting Started.....................................................................5
Connecting the AC power .................................................................. 5
Connecting to local area network (LAN)............................................. 6
Connecting a mouse and keyboard.................................................... 7
3. Performing additional connections ...................................8
Connecting to USB type-C devices.................................................... 8
Connecting to RS232 ......................................................................... 8
Installing the Hardware..................................................................... 11
4. Operating the myViewBoard Box.....................................13
myViewBoard Box screens .............................................................. 13
myViewBoard for Windows Tasks.................................................... 16
myViewBoard Companion App Tasks.............................................. 20
5. Troubleshooting ................................................................22
6. Specifications ....................................................................24
Other Information ..................................................................26
Customer Support ............................................................................ 26
Limited Warranty .............................................................................. 27
1
Copyright Information
Copyright © ViewSonic Corporation, 2019. All rights reserved.
ViewSonic and the three birds logo are registered trademarks of ViewSonic
Corporation.
Disclaimer:ViewSonic Corporation shall not be liable for technical or editorial errors
or omissions contained herein; nor for incidental or consequential damages resulting
from furnishing this material, or the performance or use of this product.
In the interest of continuing product improvement, ViewSonic Corporation reserves
the right to change product specifications without notice. Information in this
document may change without notice.
No part of this document may be copied, reproduced, or transmitted by any means,
for any purpose without prior written permission from ViewSonic Corporation.
For Your Records
Product Name:
Model Number:
Document Number:
Serial Number:
Purchase Date:
VBS100-A / VBS100-L
myViewBoard Box
VS17677
VBS100_UG_ENG Rev. 1A 04-22-19
_______________________________________
_______________________________________
Product disposal at end of product life
ViewSonic respects the environment and is committed to working and living green.
Thank you for being part of Smarter, Greener Computing.
Please visit ViewSonic website to learn more.
USA & Canada: http://www.viewsonic.com/company/green/recycle-program/
Europe: http://www.viewsoniceurope.com/eu/support/call-desk/
Taiwan: http://recycle.epa.gov.tw/recycle/index2.aspx
2
1. PRODUCT OVERVIEW
Package contents
Please take a moment to check if all the necessary items are included in the
package. If anything is missing or damaged, please contact your dealer immediately.
VBS100-A / VBS100-L
US EUROPE UK AUS
Power adapter x 1(Ac plug type * 4(UK/AU/US/EU)
US EUROPE UK AUS
US EUROPE UK AUS
HDMI cable x 1
US EUROPE UK AUS
Quick start guide (QSG)
Model No.: VS17677 / VBS100_QSG_1a_20190604
Copyright © 2019 ViewSonic Corporation. All rights reserved.
Computer
A/V device
RJ45 Cable
Projector
Monitor
VBS100
myViewBoard Box
Quick Start Guide
1
2
Contents
/ŶƐƚĂůůĂƟŽŶ
3'ĞƫŶŐ^ƚĂƌƚĞĚ
myViewBoard for windows
myViewBoard Companion for Android
HDMI Cable
Computer
iOS/ Android
Monitor Monitor
Monitor
RESET 5V USB HDMI IN
HDMI OUTRS232 USB
DP OUT
11
2
55FCA2F3
3
Front view
RESET 5V USB HDMI IN
HDMI OUTRS232 USB
DP OUT
1
2
3 4
1 2 3
5
6
7
No. Components Description
1 Reset button Performs a hardware-reset of the device
2 Power LED Indicates system power status:
-Blue: power on
-None: power off
3 DC Jack 5V System power input connector.
4 GB-LAN (RJ-45) Gigabit Ethernet + 802.3at class4 Gigabit
Power over Ethernet `
GB-LAN status
- Yellow (Flashing) Activity on the link.
- Yellow (Off) No activity on the link.
-Green (ON) Activity link with 100M
speed.
-Orange (ON) Activity link with 1000M
speed.
-Green/Orange (Off) Activity link with
10M speed.
5 USB 2.0 (Type-A) ports Universal Serial Bus 2.0 500mA
*Note1/Note2
6 USB 3.0 (Type-A) ports Universal Serial Bus 3.0 900mA
*Note1/Note2
7 HDMI IN V1.4b(Type A) port High-definition multimedia interface
signal input: connects to a PC with HDMI
output, set-top box, or other video devices
(HD 720P)
*Note3
Note1: Only support FAT32 format.
Note2: USB camera or UVC device does not support hot-plug mode.
Note3: Running USB type-C and HDMI connections at the same time is NOT supported.
Only one display output can be active.
4
Rear View
RESET 5V USB HDMI IN
HDMI OUTRS232 USB
DP OUT
1
2
3 4
1 2 3
5
6
7
No. Components Description
1 RS232 port* RS232 serial port cable: connects the
display (IFP or Projector) to an external
computer. Certain functions can be con-
trolled remotely by the PC, including pow-
er on/off, volume adjustment and more.
*Note1
2 USB3.0 (Type C) ports USB3.0 SuperSpeed support and
DisplayPort 1.2(1080@60Hz) output.
*Note2
3 HDMI OUT V2.0(Type A) port Connects the other end of the HDMI ca-
ble to the HDMI port of a display device,
for example Display or Projector …etc.
Note1: Set the baud rate of controlled devices to 9600 bps.
Note2: Running USB type-C and HDMI connections at the same time is NOT supported.
Only one display output can be active.
5
2. Getting Started
Connecting the AC power
To connect your myViewBoard Box to a power source, perform the following:
1. Connect one end of the power cord to the AC adapter and the other end to a
power outlet.
2. Connect the AC adapter to the DC-in jack of your myViewBoard Box.
The myViewBoard Box supports the PoE feature. If connected to a Power Device
(PD) or a Power Sourcing Equipment (PSE), the myViewBoard Box is able to power
itself via the ethernet slot.
1. Connect a Power Device (PD) or a Power Sourcing Equipment (PSE) to a power
outlet.
2. Connect an ethernet cable connected to the Power Device (PD) to the Power
over Ethernet (PoE) slot of your myViewBoard Box.
If both power sources are available, the myViewBoard Box uses the AC adapter as
the main power source.
LAN
LAN
PoE
Ce manuel convient aux modèles suivants
1
Table des matières
Autres manuels ViewSonic Présentateur numérique
Manuels Présentateur numérique populaires d'autres marques
Samsung
Samsung SDP-850 Manuel utilisateur
Dukane
Dukane DV-P303A Manuel utilisateur
RemotePoint
RemotePoint Presenter Global Manuel utilisateur
Kensington
Kensington Wireless Presenter with Laser Pointer Mode d'emploi
NEC
NEC DS1-MP10RX2 Manuel d'utilisation
Logitech
Logitech R800 - Professional Presenter Presentation Remote... Manuel utilisateur