Viessmann Vitodens 100 Guide rapide

VIESMANN

Installation and service

instructions

for contractors

Vitodens 100

Type WB1A

18 - 24 kW Compact

Gas fired wall mounted condensing boiler

Natural gas version

For applicability, see the last page

VITODENS 100

5862 757 GB 3/2006 Please keep safe.

Please follow these safety instructions closely to prevent accidents and

material losses.

Safety instructions explained

Danger

This symbol warns against the

risk of injury.

!Please note

This symbol warns against the

risk of material losses and

environmental pollution.

Note

Details identified by the word "Note"

contain additional information.

Target group

These instructions are exclusively

designed for qualified personnel.

&Work on gas equipment must only

be carried out by a CORGI regis-

tered gas engineer.

&Electrical work must be compliant

with Part P of the building regula-

tions

&The system must be commissioned

by a CORGI registered installer.

If you notice a smell of gas

Danger

Escaping gas can cause explo-

sions which may lead to ser-

ious injury.

&Do not smoke. Prevent

naked flames and sparks.

&Never operate light switches

or those of electrical equip-

ment.

&Open windows and doors.

&Close the gas shut-off valve.

&Remove all personnel from

the danger zone.

&Observe the safety regula-

tions of your local gas sup-

plier, found on the gas meter.

&Contact your heating installer

or TRANSCO 0800 111999.

If you smell flue gas

Danger

Flue gas may lead to life-threa-

tening poisoning.

&Heating system shutdown

&Ventilate the area where the

smell of gas if found.

&Close all doors leading to the

living space.

&Do not operate electrical

switches.

Safety instructions

5862 757 GB

Working on the heating system

&Isolate the system from the mains

electric power supply, e.g. by

removing a separate fuse or by

means of a mains electrical isolator,

and check that it is no longer 'live'

using an approved test instrument.

&Isolate the gas supply and safe-

guard against unauthorised recon-

nection.

Repair work

!Please note

Repairing components which

fulfil a safety function can com-

promise the safe operation of

your heating system.

Replace faulty components

only with original Viessmann

spare parts.

Ancillary components, spare and

wearing parts

!Please note

Spare and wearing parts which

have not been tested together

with the heating system can

compromise its function. Instal-

ling non-authorised compo-

nents and non-approved

modifications/conversion can

compromise safety and may

infringe our warranty condi-

tions.

For replacements, use only ori-

ginal spare parts from

Viessmann or those which are

approved by Viessmann.

Safety instructions (cont.)

Safety instructions

5862 757 GB

Installation instructions

Preparing for installation

Product information .................................................................................... 5

Preparing for installation ............................................................................. 5

Installation sequence

Installing the boiler and making all connections ........................................... 30

Flue outlet .................................................................................................. 35

Electrical connections................................................................................. 37

Commissioning and testing ......................................................................... 42

Service instructions

Commissioning, inspection, maintenance............................................... 51

Service Instructions

Routine Servicing Instructions .................................................................... 51

Troubleshooting

Fault finding................................................................................................ 61

Repairs ...................................................................................................... 65

Designs

Connection and wiring diagram .................................................................. 70

Parts lists .................................................................................................. 72

Commissioning/service reports ............................................................... 75

Certificates

Declaration of conformity ............................................................................ 79

Keyword index .......................................................................................... 80

Index

5862 757 GB

Vitodens 100, WB1A

Set up for operation with natural gas.

Preparing for installation

General Information

Appliance description

The Vitodens 100 Compact is a fully

automatic, wall hung, fan assisted

balanced flue condensing boiler for

use with Natural Gas (G20) and is

designed for use with fully pumped

open vented or sealed systems only.

There are two models of the Vitodens

100 in the range which are fully modu-

lating between 8.0 kW (27,300 Btu/h)

and 18.0 kW (61,400 Btu/h)/24.0 kW

(84,300 Btu/h).

Internal frost protection and an elec-

tronic control unit is fitted as standard

equipment. The boiler may be used

with any suitable room thermostat and

/ or time clock in addition to the

optional controls available from

Viessmann.

Asbestos, mercury or CFC´s have not

and will not be used in this product.

Certification details

The Vitodens 100 is certified to com-

ply with the requirements of pr EN 483

and EN 625 for use in GB and IE

(Great Britain and Ireland) using gas

category 2H (G20) with a governed

gas supply at 20 mbar (8 in.wg) inlet

pressure.

The appliance classification is either

C13x, C33x, C63 or C63x depending

upon whether horizontal or vertical

flue termination is used.

Product information

Preparing for installation

5862 757 GB

Installation

Technical Specification

General Specifications and Performance Data

Rated output range

TF/TR50/30 °C kW 8 to 18 8 to 24

TF/TR80/60 °C kW 7.3 to 16.4 7.3 to 21.8

Rated heat input range kW 7.4 to 16.7 7.4 to 22.3

Maximum gas rate m

/h 1.77 2.36

Minimum CH system pressure (static

head) –Cold

bar 0.2 0.2

Maximum CH system pressure (static

head) –Hot

bar 3.0 3.0

Maximum CH flow temperature °C 80 80

Lift weight kg 37 37

Total weight inc. packaging kg 39 39

Electrical supply 230 V, 50Hz 230 V, 50Hz

Internal fuse A 4 4

Maximum power consumption W 55 55

Flue outlet (clearance 7): mm 60 60

Ventilation pipe (outside 7) mm 100 100

Product ID _-0085 BQ 0017

Gas Council Number 41-819-12 41-819-10

Preparing for installation (cont.)

Preparing for installation

5862 757 GB

Overall Appliance Dimensions

AHeating return: 722 mm

BHeating flow: 722 mm

CCondensate drain: Plastic pipe

722 mm

DGas connection: R ½ FBSP

Minimum installation clearances

The following minimum clearances (mm) must be maintained for installing and

servicing the appliance.

Preparing for installation (cont.)

Preparing for installation

5862 757 GB

Installation

AFront (behind removable panel) BFront (for service)

Flue System Specifications

Concentric Horizontal Flue System

Standard horizontal flue kit: The appli-

ance can be supplied complete with a

standard concentric horizontal flue

terminal assembly, suitable for flue

lengths of up to 620 mm from the cen-

tre of the flue outlet, which equates to

wall thicknesses of up to 480 mm for

rear flues and 463 mm for side flues,

including minimum clearances.

Extensions can be used to increase

the straight flue length up to 6 m and

include one 87° elbow.

Preparing for installation (cont.)

Preparing for installation

5862 757 GB

An extra 87° elbow can be used but

this reduces the maximum permissi-

ble length by 1 m . An extra 45° elbow

can be used but this reduces the max-

imum permissible length by 0.5 m .

ACombined length of flue outlet/

ventilation pipe max 6m.

BFlue outlet/ventilation pipe (can

be shortened as necessary)

Concentric Vertical Flue System

The vertical flue kit (optional extra)

with extensions may be used for up

to10 m applications.

An extra 87° elbow can be used but

this reduces the maximum permissi-

ble length by 1 m. An extra 45° elbow

can be used but this reduces the max-

imum permissible length by 0.5 m.

Preparing for installation (cont.)

Preparing for installation

5862 757 GB

Installation

Before commencing the installation

refer to diagram below to determine

which optional extension kits are

required, if any.

ACombined length of flue outlet/

ventilation pipe max. 10 m.

BFlue outlet/ventilation pipe (can

be shortened as necessary)

Preparing for installation (cont.)

Preparing for installation

5862 757 GB

Autres manuels pour Vitodens 100

Table des matières

Autres manuels Viessmann Chaudière

Viessmann

Viessmann VITODENS 200 WB2 Series Manuel utilisateur

Viessmann

Viessmann Vitoladens 300-C Guide rapide

Viessmann

Viessmann Vitodens 200-W System Manuel utilisateur

Viessmann

Viessmann Vitocrossal 300 CA3 2.5 Guide rapide

Viessmann

Viessmann Vitocrossal 200 CM2 400 Mode d'emploi

Viessmann

Viessmann Vitoflex 300-RF Series Guide d'installation et d'utilisation

Viessmann

Viessmann VITOCROSSAL 300 Manuel d'instructions

Viessmann

Viessmann Vitodens 200-W System Mode d'emploi

Viessmann

Viessmann VITOCELL 100-U Manuel utilisateur

Viessmann

Viessmann Vitodens 100-W Manuel utilisateur

Viessmann

Viessmann VITOCROSSAL Series Manuel utilisateur

Viessmann

Viessmann Vitocell 140-E Guide rapide

Viessmann

Viessmann Vitodens 200-W System Mode d'emploi

Viessmann

Viessmann Vitodens 100-W B1HA 26Vitodens 100-W B1HA 35Vitodens 100-W B1KA... Guide rapide

Viessmann

Viessmann Vitodens 100-W WB1C Manuel utilisateur

Viessmann

Viessmann Vitotwin 300-W Mode d'emploi

Viessmann

Viessmann B2HA 80 Manuel utilisateur

Viessmann

Viessmann VITOCROSSAL 200 Manuel utilisateur

Viessmann

Viessmann Vitodens 100-W WB1C Manuel utilisateur

Viessmann

Viessmann Vitodens 200-W WB2B Series Manuel d'instructions

Viessmann

Viessmann B2HA 19 Manuel utilisateur

Viessmann

Viessmann Vitocrossal 300 CT3 SERIES Guide de démarrage rapide

Viessmann

Viessmann Vitorond 100 Manuel utilisateur

Viessmann

Viessmann Vitodens 100-W Manuel utilisateur

Manuels Chaudière populaires d'autres marques

Vaillant

Vaillant uniSTOR VIH SW GB 500 BES Manuel utilisateur

Radijator

Radijator BIO max 23.1 Manuel utilisateur

Brunner

Brunner BSV 20 Manuel utilisateur

Buderus

Buderus Logamax GB062-24 KDE H V2 Manuel utilisateur

Potterton

Potterton 50e Fiche technique

UTICA BOILERS

UTICA BOILERS TriFire Manuel utilisateur

Joannes

Joannes LADY Series Manuel

ECR International

ECR International UB90-125 Manuel d'instructions

Froling

Froling FHG Turbo 3000 Manuel utilisateur

Froling

Froling P4 Pellet 8 - 105 Manuel utilisateur

U.S. Boiler Company

U.S. Boiler Company K2 Manuel utilisateur

Henrad

Henrad C95 FF Manuel utilisateur

NeOvo

NeOvo EcoNox EF 36 Manuel utilisateur

Potterton

Potterton PROMAX SL 12 Manuel utilisateur

Eco Hometec

Eco Hometec EC 25 COMPACT Manuel utilisateur

Baxi

Baxi Prime 1.24 Manuel utilisateur

REXNOVA

REXNOVA ISA 20 BITHERMAL Manuel utilisateur

Radiant

Radiant R2K 55 Manuel