VideoLabs USB Laptop Camera Manuel utilisateur
USB Laptop
Camera
Installation
And
Quick Start
Guide
VideoLabs, Inc.
5960 Golden Hills Drive
Golden Valley, MN 55416-1040
Toll Free U.S.: 800-467-7157
Phone: 612-542-0061
Fax: 612-542-0069
www.videolabs.com
USB Laptop Camera Installation
& Quick Start Guide
Page 2
Warranty Information on Hardware*
One (1) year limited warranty on all parts
VideoLabs, Inc. warrants this product against defects in materials and workmanship for a period
of one (1) year from the date of purchase. If VideoLabs, Inc. receives notice of such defects
during the warranty period, VideoLabs, Inc. will either, at its option, repair or replace products
which prove to be defective.
*VideoLabs, Inc. manufacturers its hardware products form parts and components that are new or
equivalent to new in accordance with industry-standard practices.
Exclusions
The above warranty shall not apply to defects resulting from: improper or inadequate
maintenance by customer, customer-supplied software or interfacing; unauthorized modifications
or misuse; operation outside of the environment specifications for the product; or improper site
operation and maintenance.
Obtaining Warranty Service
To obtain warranty service, products must be returned to a service facility designated by
VideoLabs, Inc.. Customer shall prepay shipping charges for products returned to VideoLabs Inc.
for warranty service and VideoLabs Inc. shall pay for return of the products to customer.
However, customer shall pay all shipping charges, duties and taxes for products returned to
VideoLabs, Inc. from another country.
VideoLabs Customer Service
If the camera is still under warranty, VideoLabs will test, repair or replace the product without
charge. If the camera is out-of-warranty, VideoLabs will test, then repair the product for the cost
of parts and labor. Charges will be estimated and confirmed by the customer prior to repair by a
VideoLabs’ technician.
Repair time for all cameras is a maximum of 2 business days from receiving to outbound
shipping. VideoLabs, Inc. will not accept responsibility for shipment after the camera has left our
premises.
VideoLabs Technical Support
VideoLabs’ technicians will determine and discuss with the customer the criteria for repair costs
and/or replacement. Contact VideoLabs’ Technical Support through one of these sources:
phone: 800-467-7157 (U.S. only) or 612-542-0061, e-mail: [email protected] or web site:
www.videolabs.com
RMA (Return Merchandise Authorization) Number
Before returning a camera for repair or replacement, request an RMA number from VideoLabs
Technical Support.
Provide the technician with a return phone number or email and a shipping address. Describe
the product, the reason for repair or return, and the date of purchase.
Include your RMA number on all correspondence with VideoLabs. Write your RMA number on
the outside of the box when you return the camera.
Voided Warranty
This warranty does not apply if the product has been disassembled or damaged through misuse,
accident, modifications, or unauthorized repair.
USB Laptop Camera Installation
& Quick Start Guide
Page 3
Shipping and Handling
VideoLabs will not pay for inbound shipping, transportation, or insurance charges, or accept any
responsibility for loss and/or damage from inbound transit. VideoLabs requires that all overseas
returns are shipped via UPS.
VideoLabs will pay for outbound shipping, transportation, and insurance charges but will not
assume responsibility for loss and/or damage by the outbound freight carrier.
Products Not Under Warranty
Payment arrangements are required before outbound shipping for all products that are out-of-
warranty.
Federal Communications Commission
This device complies with Part 15 of the FCC Rules Operation and is subject to the following two
conditions: this device may not cause harmful interference, and (2) this device must accept any
interference received, including interference that may cause undesired operation.
This equipment has been tested and found to comply with the limits for a Class B Digital Device,
pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection
against harmful interference in a residential installation. This equipment generates, uses and can
radiated radio frequency energy and, if not installed and used in accordance with the instruction,
may cause harmful interference to radio communication. However, there is no grantee that
interference will not occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by tuning the equipment off
and on, the user is encouraged to try to correct the interference by one or more of the following
measures:
•Reorient or relocate the receiving antenna.
•Increase the separation between the equipment and receiver.
•Connect the equipment into an outlet on a circuit different from that to which the receiver is
connected.
•Consult the dealer or an experienced radio/TV technician for help.
Notice: Changes or modifications not expressly approved by the party responsible for compliance
could void the user's authority to operate the equipment.
CE DECLARATION
This device complies with CE
· EN50081-1: EN55022 (Class B)
EN61000-3-2
· EN50082-1: IEC801-2
IEC801-3
IEC801-4
All contents are subject to change without notice.
All trademarks are the property of their respective owner.
USB Laptop Camera Installation
& Quick Start Guide
Page 4
Table of Contents
INTRODUCTION.................................................................................................................................. 5
PACKING LIST....................................................................................................................................... 5
SYSTEM REQUIREMENTS........................................................................................................................ 5
INSTALLATION INSTRUCTIONS ..................................................................................................... 6
DRIVER INSTALLATION.......................................................................................................................... 6
SOFTWARE INSTALLATION..................................................................................................................... 8
USB LAPTOP CAMERA VIEWER QUICK START ........................................................................ 10
BUTTON DESCRIPTIONS....................................................................................................................... 11
PRECAUTIONS................................................................................................................................... 12
USB Laptop Camera Installation
& Quick Start Guide
Page 5
Introduction
Thank you for purchasing the VideoLabs USB Laptop Camera. Please contact VideoLabs if you
have any questions about the USB Laptop Camera or any other VideoLabs Products
Packing List
The USB Laptop Camera package should contain the following:
•Camera with attached cable and mounting clip
•Program Disk - 3 ¼” Floppy Disk
•Driver Disk - 3 ¼” Floppy Disk
•Documentation
System Requirements
The USB Laptop Camera has been designed for computer systems with the following:
•Microsoft Windows 98
•Pentium MMX 233Mhz (minimum)
•USB Interface
•20MB Hard Disk Space
•32MB RAM
•16bit Display and SVGA (minimum)
USB Laptop Camera Installation
& Quick Start Guide
Page 6
Installation Instructions
Follow these instructions to install the required drivers and software
Driver Installation
1. Connect the USB connector of the USB Laptop Camera to the USB port on the Computer
2. Start up Microsoft Windows 98
3. The following screen will appear during startup. Click ‘next’.
4. Select ‘Search for the best driver for your device on the screen that appears and Click ‘next’
5. On the screen, check only the ‘Floppy disk drives’ box. Put the Disk Labeled ‘USB Laptop
Camera Drivers’ into the floppy drive. Click ‘next’
USB Laptop Camera Installation
& Quick Start Guide
Page 7
6. The following screen will appear after the search is complete. Click ‘next’.
7. During the driver installation, you will be asked to put the Windows 98 CD into the CDROM
Drive. Put the correct CD into the drive, wait for it to load, and press OK.
8. The last screen will appear saying that the USB Laptop Camera was installed. Click ‘finish’.
USB Laptop Camera Installation
& Quick Start Guide
Page 8
Software Installation
To install the required software, follow the directions below.
1. Insert the floppy disk labeled “USB Laptop Camera Program Disk” into the floppy drive.
2. Click the Start button on the desktop, and then click Run.
3. Type a:\setup.exe, then press enter.
4. The following screen will appear; click ‘next’.
5. Enter your name and company information, and then click ‘next’.
6. Click ‘next’ to accept the default location for program files, otherwise click ‘Browse’ to specify
a new location.
USB Laptop Camera Installation
& Quick Start Guide
Page 9
7. Select the appropriate check box to install the Program
8. Click ‘next’ to accept the default entry for program icons, or choose the desired location.
9. Click ‘finish’ to complete the installation of the camera software.
10. The camera viewer application can then be used to capture full motion video or still images
from the USB Laptop Camera. Click on the following icon to start the camera viewer
USB Laptop Camera Installation
& Quick Start Guide
Page 10
USB Laptop Camera Viewer Quick Start
The following instructions explain the basic functions available in the USB Laptop Camera Viewer
program.
•To start the program, click on the USB Laptop Camera Viewer Icon
•When the program is running the following window should appear on the screen.
Still Mode
Button
Video Mode
Button
Camera
Settings
Button
Record /
Take Picture
Button
Zoom ButtonPan/Tilt
Buttons Image
Window
Table des matières
