VICUT VR320 Manuel utilisateur
VR320 Digital Label Die-Cutter
User Manual
Please read this manual before you use this equipment be carefully.
ANHUI William(VICUT) CNC Technology Co., LTD
Version: revised 2020/12
Copyright statement
© 2020 VICUT., This document, attachments, and information contained herein
are the confidential and proprietary property of VICUT. and their suppliers. As
such, this document, attached files, and information contained herein are
subject to all nondisclosure and proprietary information agreements currently
in effect with your organization. Copies of this document, any portion of this
document, or attachments may not be transmitted or disclosed to any third
party without the prior written permission of VICUT.
© 2020 VICUT. All content is the confidential property of, or licensed to,VICUT
(“VICUT” “we,” or “us”) and is protected under Chinese and Foreign copyright,
trademark and other intellectual property laws.
INDEX
Chapter 1 Safety Matter………………………………………………………………………………....….............…1
1-1 Safety matter needing attention……………………………………………………..............1
1-2 Caution labels…………………………………………………………………..…….................….3
1-3 Safety attention instruction…………………………………………………..........…......…..4
Chapter 2 Handling and installation………………………………………………………..........…….........…5
2-1 Crate Handing……………………………………………………………...…………...............…5
2-2 Crate Disassemble……………………………………………………………………....…...........5
2-3 Storage requirements………………………………………………………………….........…....6
2-4 Machine Handling…………………………………………………………............…............6
2-5 Space requirements…………………………………………………………......…......…...…..6
2-6 Electric and pneumatic……………………………………………….............……....…..…6
2-7 Installation procedure ………………….……………………………………………..….........…6
2-8 Dismantling…………………………………………………………………….......…....…..........8
Chapter 3 System Introduction…………………………………………………………….............…...….......9
3-1 Functions introduction…………………………………………………….......………...….......9
3-2 Packing list………………………………………………………….....…...................…..…..10
3-3 Specification…………………………..............……………………………………....…......…11
3-4 Parts Name…………………………………………………………..…………………..................12
Chapter 4 Preparation Work…………………………………………......…………………………...............…14
4-1 Media loading………………………………………………………………….........................14
4-2 Sensor setup……………………………………………………………………..….........….........15
4-3 Lamination……………………………………………………………………......…...............….20
4-4 Cutting holder setup………………………………………………………… ..................….21
4-5 Matrix Removal setup………………………………………………………….....…............…24
4-6 Slitting unit setup……………………………………………………………………................…26
4-7 Separate rewinder……………………………………………………………....................….27
4-8 Vacuum system…………………………………………………………………..…................….27
Chapter 5 System Operating Instruction ……………………………………………………………….........……28
5-1 Operation instruction of control panel………………………………………................….28
Panel button instruction………………………………………................................….29
5-2 Getting started……………………………………………………………...…………………..............30
1. Basic setting……………………………………………………………............................………31
2. Job data sending…………………………………………………………………………….................32
3. Start cutting……………………………………………………………………........………..............32
4. Status Monitoring………………………………………………....................................…33
5-3 Functional parameter in setting menu……………………………….........................33
5-4 Tension control………………………………………………………..............……………........…42
5-5 Tools Select ………………………………………………………………………………….................43
5-6 Slitting mode………………………………………………………………........……….......…....….46
5-7 Multi. Cut (Long label cut)…………………………………………………………......……....…..46
Chapter 6 VOREY cutter software………………………………………………………..................…....…..48
6-1 USB Drive installation and setup…………………………………………........…………....….48
Transfer mode – UART…………………………………………………….......................… 48
Transfer mode - Network…………………………………………………....................……50
Transfer mode – USB………………………………………………................................50
6-2 File design……………………………………………………………………...........................…51
6-3 PLT format file generation………………………………………………................………...54
6-4 Cutter software…………………………………………………...................................…55
6-5 File open and software……………………………………………………………..................…58
6-6 Trajectory optimization……………………………………………………......................…..65
Chapter 7 Equipment maintenance …………………………………………………….........……........………68
Notice for warranty……………………………………………………………………….....…………................….71
ANHUI WILLIAM CNC TECHNOLOGY
1
Chapter 1 Safety Matter
1-1 Safety matter needing attention
1. The operator should obey the following 4 basic safety operation principles
(1) The machine should be operated or maintained only by trained technician.
(2) Read the user manual in detail and understand its contents.
(3) For check convenience, put the user manual near the machine.
(4) The people including operator and maintenance technician should know location of E-
stop device and realize its function and operation methods.
2. Safety precaution before or after turning on the machine
Firstly confirm that whether all switches are OFF, and machine has been correctly
ground.
AC electric power source
The electric power source used on this machine is 1, 3 wires, 110V-220V~. Rated current of
the main power switching device 20A. Such switching device should be in compliance with its
safety relevant standards.
3. Safety precaution during handling and installation
To increase the machine working efficiency, the installation environment should be well
ventilated with good air quality. The surrounding temperature should be lower than 40C,
and prevention of rain and direct sunlight is required.
Safety precautions during handling and installation are as follows：
(1) Make sure that the foundation is strong enough to support the machine.
(2) Lifting operation is only allowed one person.
(3) When lifting the machine, nobody is allowed to be under or near the machine.
(4) Helmet is required during handling, installation or cleaning.
(5) If it’s necessary to climb on the machine, please use safe and secure ladder or
platform.
(6) Adopt proper device for heavy parts lifting.
(7) Confirm that whether the lifting wire rope is strong enough to lift the machine or
components.
(8) Please turn off the power before handling or installation. If power is required, let
others know the location of E-stop device in advance.
(9) Please wear leather gloves or other similar protective equipment during handling.
ANHUI WILLIAM CNC TECHNOLOGY
2
4. Safety precaution during operation
The operator should be familiar with machine’s function characteristics and operation
methods. Don’t let other people approach the machine. During running, stretch hands into
work area is prohibited. If there is any abnormal situation happened, turn off the power
immediately. After that, try to find the solutions.
Safety precautions during operation are as follows：
(1) Don’t remove any safety guarding or devices.
(2) Don’t remove or change location of any interlocking mechanism.
(3) Prevent wet hands to touch switches.
(4) Don’t put any part of human body on or near the machine’s moving parts.
(5) Keep your hair away from moving parts.
(6) Don’t wear bangle, watch, jewelry or loose clothes.
(7) Except material loading/unloading, it’s not necessary to wear gloves.
(8) Generally an operator is required for this machine. If more than one operator is
required, there should be good communication between operators.
5. Safety precaution during maintenance
Please turn off the power before maintenance.
Safety precautions during maintenance are as follows:
(1) Turn off the main power before inspection or maintenance.
(2) Maintenance or inspection should be carried out by authorized technician.
(3) It’s prohibited to climb the machine.
(4) Please use the recommended lubricant or grease.
ANHUI WILLIAM CNC TECHNOLOGY
3
1-2 Cautions labels
Improper operation can cause causalities and
equipment damage
Improper operation can cause causalities and
other objects damage
Improper operation can cause causalities and
equipment damage
Improper operation can cause causalities and
equipment damage
Improper operation can cause causalities and
equipment damage
ANHUI WILLIAM CNC TECHNOLOGY
4
1-3 Safety attention instruction
Don’t touch the top end of knives.
Otherwise, fingers will be injured
Don’t damage and change original
power wire and plug. The power cord
should not be excessively bent, strong
tension, bundling and compression under
heavy loads. This will make power supply
damaged, and cause electric shock and fire.
As a long time, please put down the
power cord from the wall socket
Otherwise cause the fire
Machine running, don’t put hands on
axis, this will cause injury.
When the power cord from the socket,
you should pull the plug , should not
pull the cable
Stronger pull the cable can result in
electric shock or fire
ANHUI WILLIAM CNC TECHNOLOGY
5
Chapter 2 Handling and Installation
2-1 Crate handling
Use forklift with capacity of 1 tons to transport the crate.
2-2 Crate assembly & dis-assembly
Crate assembly
When packing, firstly put the bottom board. Then fix the machine’s 4 wheels. After that,
install the 4 side boards. Finally put on the top board.
Crate dis-assembly
Use the claw hammer to pull off the nails, the arrow direction was put the nails, you can
Take off the front cover and top cover.
2. Use wrench to adjust the level of machine foot.
ANHUI WILLIAM CNC TECHNOLOGY 6
2-3 Storage requirements
Storage temperature：10-40C
Humidity: 30~90%
2-4 Machine handling
The machine transportation should be carried out by means of two persons. One person
stands behind to push the machine and the other stands on machine front side to control the
direction.
2-5 Space requirements
Length：3m, Width: 2m, Height:2m
2-6 Electric and pneumatic specification
floor.
3. Use spirit level check the level of 4 feet, machine will be stable and same level on the
1. Electric power: 1/ 220V / 50 or 60Hz as standard. 110V model is available as per request.
2. Required compressed air: Min. 0.4 Pa, low capacity, 8mm hose connection (if your
machine have vacuum system, this is options).
2-7 Installation procedure
1. Move machine to stable level floor by forklift.
# How to setup blower.
(1) Keep the blower on the flat floor.
(2) Connect the tube with blower. You can fix the tube by attached clamp.
(3) Connect the tube to the machine. You can fix the tube by attached clamp.
ANHUI WILLIAM CNC TECHNOLOGY 7
(1) Keep the compressor on flat floor.
(2) Connect the 8mm tube of compressor to the machine.
(3) Please refer to connecting position of below picture’s compressor tube position.
Note: The tube diameter is 5cm, if you need long tube, you can buy from the market, our
standard is 5m. We suggest you install blower in the outdoor, because it is big noise.
(4) Connect the power from machine to Blower ,
the socket in the right side of machine.
Air compressor and Blower will operate the media keeps flat during cutting.
We provide the blower as a set of the machine, but we don’t offer the air compressor
so please prepare it locally.
# How to setup air compressor
4. Installation procedure Air Compressor and Blower (Standard for VR320)
Table des matières
Autres manuels VICUT Coupeur
