Vicon V992D-N4 Manuel d'instructions

Quick User Guide Network Camera

Warning before installation

-Power off the Network camera if it is found to be smoking or smells unusual.

-Keep the Network camera away from water. If the Network camera gets wet, power

off immediately.

-Do not place the Network camera near heat sources, such as a television or oven.

-Refer to your product datasheet/specification for the operating temperature.

-Keep the Network camera away from direct sunlight.

-Do not place the Network camera in high humidity environments.

-Do not place the Network camera on unsteady surfaces.

-Do not touch the Network camera when there is lightning present.

-Do not disassemble the Network camera.

-Do not drop the Network camera.

-Do not insert any object, such as a screwdriver, into the Network camera.

For other safety and regulation information, refer to “User’s manual.”

1. Check Contents

No.

Item

Description

Network Camera

V992D-N4

Software CD

User’s manual, Utility software

Quick User Guide

This document

Accessories

Silica gel

Template for installation

Video monitor cable

Tapping Screw M4x30: 3 pcs

Anchor: 3 pcs

Screw M4x8: 4 pcs

Surface Mount Bracket

L-Wrench (T20)

Focus Adjust Ring

Anti-reflection collar (rubber)

2. Physical Description

Installation of Anti-Reflection Collar

Quick User Guide Network Camera

①Control Button

-Change Video output format NTSC/PAL (toggle)

-Factory Default (hold steadily for more than 10 seconds)

②Network LED

③Status LED

④Reset Button

⑤Video output for service monitor

⑥Lock nut

⑦Focus adjustment

⑧Network (RJ-45 PoE required)

3. Making Connection

Connect Ethernet cable to make a connection to the PoE hub.

The camera supports PoE only.

4. Assign IP Address

The default setting of the camera is set to “DHCP” and “UPnP” function is

set to ON. If you have a DHCP server on your network and UPnP function is

enabled on your PC you can find the network camera in “My network”.

If a DHCP server is not available on your network, assign IP address by

the following process.

Execute Multi Upgrade Tool (from the Installation CD). It will search cameras on

the network automatically.

1) After the list of detected devices appears, select the camera you are trying to

configure.

Quick User Guide Network Camera

2) Select the Network type as Static or DHCP. If Static is selected, enter all of the

network information for your camera.

3) Select the “Change IP Address” button. The message “Do you want to change IP

address?” will display; select “Yes” from the pop-up window.

4) Check the Type as Static or DHCP from the list.

Then double click the camera in the list; Internet Explorer® will open

automatically.

Quick User Guide Network Camera

5. Web Browser Connection

Note: The Network camera supports Internet Explorer 7 or above.

Please check version of your browser and update it if necessary.

When you first access the camera you need to download and install an

Active X control from the camera to display a Live View image.

Default User and Password are set to “ADMIN” and “1234”. Please type in

the user ID and password to connect the network camera.

Note: By Default the cameras come with “Installation Mode” set to “ON” to

enable Analog output. Additionally, all installation setup must be done prior

to the camera being used with a VMS, including ViconNet; the VMS forces

the Installation Mode to OFF. You must turn Installation Mode to Off to use

720p or 1080p streaming.

For further information on setup, refer to User’s manual on the software CD.

Table des matières

Autres manuels Vicon Caméra de sécurité

Vicon

Vicon IX 8000 IR Manuel utilisateur

Vicon

Vicon V930D Manuel utilisateur

Vicon

Vicon Roughneck V2100B Series Manuel utilisateur

Vicon

Vicon V9360 Manuel utilisateur

Vicon

Vicon SURVEYOR 2000 S2000-CC22-EX Manuel utilisateur

Vicon

Vicon Surveyor 282-20-02 Series Manuel utilisateur

Vicon

Vicon V2008-WNL-LPR Manuel utilisateur

Vicon

Vicon IX4000AL Manuel utilisateur

Vicon

Vicon VC-700WDR Manuel utilisateur

Vicon

Vicon HPOE-100 Manuel utilisateur

Vicon

Vicon Roughnec V922D Series Manuel utilisateur

Vicon

Vicon V980B Series Manuel utilisateur

Vicon

Vicon ROUGHNECK V-CELL-HD-A Manuel utilisateur

Vicon

Vicon I-ONYX MPD-980DN-O Manuel utilisateur

Vicon

Vicon SurveyorVFT Manuel utilisateur

Vicon

Vicon Surveyor 99 Manuel utilisateur

Vicon

Vicon SN680D-WNIR Manuel utilisateur

Vicon

Vicon V661V-Series Mode d'emploi

Vicon

Vicon V940B Manuel utilisateur

Vicon

Vicon SVFT-PRS22E Manuel utilisateur

Vicon

Vicon V992D-IR Manuel utilisateur

Vicon

Vicon Cruiser SN673V-C Manuel utilisateur

Vicon

Vicon Vantage V16 Manuel utilisateur

Vicon

Vicon Series 247-00-03 Manuel utilisateur

Manuels Caméra de sécurité populaires d'autres marques

Okina USA

Okina USA SIR36-870VF650LP Manuel utilisateur

Divio

Divio NDR155PA Manuel utilisateur

Canon

Canon VB-C500D Manuel utilisateur

Easy Access

Easy Access EasyGuard Manuel utilisateur

Vivotek

Vivotek FD9389-EHV-v2 Manuel utilisateur

TUYA

TUYA COSMO W2 Manuel utilisateur

Eusso

Eusso UNC7500-IR Guide de configuration

urmet domus

urmet domus 1096/204 Manuel utilisateur

VC VC20 series Manuel utilisateur

Axis

Axis Q1614 Manuel utilisateur

ieGeek

ieGeek DD201 Manuel utilisateur

VADDIO

VADDIO ClearVIEW HD-USB PTZ 999-6990-000 Manuel utilisateur

Grundig

Grundig GCH-K0274P Manuel utilisateur

Lorex

Lorex VANTAGE LBC7032 Manuel utilisateur

4xem

4xem WPT Manuel utilisateur

Samsung

Samsung SCV-3082 Manuel utilisateur

Vitek

Vitek VTC-C544 Manuel utilisateur

Lumens

Lumens VC-A50PNW Manuel utilisateur