Vicon V960D-N312M Manuel d'instructions

Quick User Guide V960D Series Indoor Network Camera

Warning before installation

-Power off the Network camera if it is found to be smoking or smells unusual.

-Keep the Network camera away from water. If the Network camera gets wet, power

off immediately.

-Do not place the Network camera near heat sources, such as a television or oven.

-Refer to your instruction manual for the operating temperature.

-Keep the Network camera away from direct sunlight.

-Do not place the Network camera in high humidity environments.

-Do not place the Network camera on unsteady surfaces.

-Do not touch the Network camera when there is lightning present.

-Do not disassemble the Network camera.

-Do not drop the Network camera.

-Do not insert any object into the Network camera, such as a screwdriver.

For other safety and regulation information, please refer to “User’s manual”.

1. Check Contents

No. Item Description

1 Network Camera V960D Series (V960D-N312, V960D-N312M,

V960D-N922M, V961D-N312, V961D-N312M,

V961D-N922M, V962D-N312, V962D-N312M,

V962D-N922M,)

2 Software CD User’s Manual, Utility software

3 Quick User Guide This document

4 Accessories Template for installation

Video monitor cable

Tapping Screw 4x30: 2pcs

Anchor: 2pcs

Tapping Screw for middle cover 3x8: 2pcs

Network extension cable

Power cable

2. Physical Description

1. Network (RJ-45 PoE supported)

2. Power (DC12V / AC24V)

3. I/O signal terminal block

-Audio In (Line in)

-Audio Out (Line Out)

-Alarm In (Dry Contact)

-Alarm Out (Relay out [2A:AC120V/DC60V])

Quick User Guide V960D Series Indoor Network Camera

4. Micro SD card (SDHC supported)

5. Reset Button

6. Status LED

7. Video output for service monitor

3. Making Connection

2. Connect Ethernet cable to make

connection to the network hub.

1. If you have external devices such

as sensor or alarms, make connection

from connectors

3. Connect power cable to the camera.

When you use PoE function, you don’t

need to connect power.

Quick User Guide V960D Series Indoor Network Camera

4. Assign IP address

The default setting of the camera is set to “DHCP” and “UPnP” function is

set to ON. If you have a DHCP server on your network and UPnP function is

enabled on your PC you can find the network camera in “My network”.

If a DHCP server is not available on your network, please assign IP address

by the following process.

Execute Discovery_Tool.exe. It will search cameras on the network automatically.

1) After the camera is listed in camera list, select the camera.

2) Type in the all network information.

3) Click “Apply” button.

Then double click the camera in the list; Internet Explorer® will open

automatically.

5. Web Browser Connection

Note: The Network camera supports Internet Explorer® 7 or above.

Please check version of your browser and update it if necessary.

When you first access the camera you need to download and install an

Active X control from the camera to display a Live image.

Default User and Password are set to “ADMIN” and “1234”. Please type in

the user ID and password to connect the network camera.

Quick User Guide V960D Series Indoor Network Camera

Note: By Default the cameras come with “Installation Mode” set to “ON” to

enable Analog output. You must turn Installation Mode Off to use 720p

or 1080p streaming.

For further information on setup, refer to User’s manual on software CD.

Ce manuel convient aux modèles suivants

Table des matières

Autres manuels Vicon Caméra de sécurité

Vicon

Vicon SurveyorVF SVFT-M Manuel utilisateur

Vicon

Vicon V2008-WNL-LPR Manuel utilisateur

Vicon

Vicon SURVEYOR4A Manuel utilisateur

Vicon

Vicon V9360-1 Manuel utilisateur

Vicon

Vicon I-Onyx MPD-955 Manuel utilisateur

Vicon

Vicon V9360 Manuel utilisateur

Vicon

Vicon SURVEYOR 2000 S2000-CC22-EX Manuel utilisateur

Vicon

Vicon VC367DSP Manuel utilisateur

Vicon

Vicon V3FCD SERIES Manuel utilisateur

Vicon

Vicon Surveyor 282-20-02 Series Manuel utilisateur

Vicon

Vicon V905-CUBE Manuel utilisateur

Vicon

Vicon Cruiser SN663V Manuel utilisateur

Vicon

Vicon V992E Manuel utilisateur

Vicon

Vicon SVFT-PRS22E Manuel utilisateur

Vicon

Vicon VC355-DSP Manuel utilisateur

Vicon

Vicon CE202D-N Manuel utilisateur

Vicon

Vicon Surveyor MKII PTZ SV36W Manuel utilisateur

Vicon

Vicon I-ONYX MPD-980DN-O Manuel utilisateur

Vicon

Vicon SVFT-W35 Manuel utilisateur

Vicon

Vicon Cruiser S660 Mode d'emploi

Vicon

Vicon V988D Manuel utilisateur

Vicon

Vicon 240-60 Series Manuel utilisateur

Vicon

Vicon V3FD Series Manuel utilisateur

Vicon

Vicon XX264-20-00 Manuel utilisateur

Manuels Caméra de sécurité populaires d'autres marques

Okina USA

Okina USA SIR36-870VF650LP Manuel utilisateur

Divio

Divio NDR155PA Manuel utilisateur

Canon

Canon VB-C500D Manuel utilisateur

Easy Access

Easy Access EasyGuard Manuel utilisateur

Vivotek

Vivotek FD9389-EHV-v2 Manuel utilisateur

TUYA

TUYA COSMO W2 Manuel utilisateur

Eusso

Eusso UNC7500-IR Guide de configuration

urmet domus

urmet domus 1096/204 Manuel utilisateur

VC VC20 series Manuel utilisateur

Axis

Axis Q1614 Manuel utilisateur

ieGeek

ieGeek DD201 Manuel utilisateur

VADDIO

VADDIO ClearVIEW HD-USB PTZ 999-6990-000 Manuel utilisateur

Grundig

Grundig GCH-K0274P Manuel utilisateur

Lorex

Lorex VANTAGE LBC7032 Manuel utilisateur

4xem

4xem WPT Manuel utilisateur

Samsung

Samsung SCV-3082 Manuel utilisateur

Vitek

Vitek VTC-C544 Manuel utilisateur

Lumens

Lumens VC-A50PNW Manuel utilisateur