Viatom DT1 Manuel utilisateur
User’s Manual
Bluetooth Clinical Electrical
Thermometer
Model DT1/DT2
2
1. The Basics
This manual contains the instructions necessary to oper
ate the product safely and in accordance with its functio
n and intended use. Observance of this manual is a pr
erequisite for proper product performance and correct o
peration and ensures patient and operator safety.Profess
ionals, non-professionals, and patients can operate medi
cal device in accordance with the instructions.
1.1 Safety
Get medical attention if you have high fever or
prolonged fever, especially young children. Read
carefully and follow the instructions to ensure accurate
temperature measurement.
Keep out of reach of unsupervised children.
Components may be harmful if swallowed.
This device is designed for oral, rectal, or axillary use
only.
Please note that temperature measuring are affected by
many factors, including strong physical activity before
the test, drinking hot or cold drinks, and measurement
methods.
Avoid taking temperature for 30 minutes after physical
exercise, bathing, dining, or drinking hot or cold
beverages.
Stop using the thermometer if it operates erratically or
if the display malfunctions.
Allow the thermometer to warm naturally to room
temperature before using. Performance may be
affected if operated or stored outside stated
temperature and humidity ranges or if the patient's
temperature is below the ambient (room) temperature.
Please note that the use of this product in high
temperature or humidity may cause inaccurate
temperature measurement results.
Do not boil, bite, bend, drop, or disassemble the
3
thermometer.
Do not share the thermometer with more than one
person without disinfection, or it may cause
cross-infection.
Do not try to sterilize by immersing the thermometer
head in alcohol or hot water (water temperature
exceeds 50°C).
Do not use force to squeeze the product. If the
appearance is damaged, stop using it immediately.
Precision components are used in the construction of
this device. Extremes in temperature, humidity, direct
sunlight, shock or dust should be avoided.
Clean the device with a dry, soft cloth or a cloth
dampened with water and a neutral detergent. Never
use alcohol, benzene, thinner or other harsh chemicals
to clean the device .
Measurements may be distorted if the device is used
close to television, microwave oven, cellular telephone,
X-ray or other devices with strong electrical fields.
Used equipment, parts and battery are not treated as
ordinary household waste, and must be disposed of
according to the applicable local regulations.
Please keep the thermometer close to the skin when
measuring. If it is loose, the temperature measurement
result could be inaccurate.
During the measurement, please avoid strenuous
activity,eating or strong emotional ups and downs, and
use this product in a relatively stable indoor
environment.
When reusing the device, confirm that the device is
clean.
Do not modify the device. It may cause accidents or
damage to the device.
Do not self-diagnose the measurement results and start
treatment by yourself. Always consult your doctor for
evaluation of the results and treatment.
4
Adults are required to shaving the skin before
measuring their temperature. Make sure that the skin
that is in contact with the thermometer is flat and
wrinkle-free.
Do not use the device where flammable gases such as
anesthetic gases are present. It may cause an
explosion.
Please note that the use of this product in high
temperature or humidity may cause inaccurate
temperature measurement results.
The effective wireless transmission distance of this
product in a barrier-free environment is 10 meters. If
the distance exceeds this limit, this product may not
work properly. Please use this product in the effective
wireless transmission distance.
The battery inside this product cannot be replaced.
All the illustrations provided in this manual are for
reference only.
Please refer to the actual product.
When the device is abnormal or damaged, please do
not use the device again, you can contact the manufacturer.
If necessary, to obtain information on the use and
maintenance of the equipment or to report abnormal
conditions, please contact the manufacturer.
5
2. Introduction
2.1 Intended Use
The product is used to measure body temperature in the
home and in the medical sector.
2.2 Contraindications
Those who are allergic to stainless steel or PC plastic
should not use this product.
2.3 Symbols
Symbol
Meaning
Application part type BF
Manufacturer
CE0197 In conformity with Directive 93/42/EEC
European Representative
Symbol for “ENVIRONMENT PROTECTION –
Waste electrical products should not be
disposed of with household waste. Please
recycle where facilities exist. Check with your
local authority or retailer for recycling advice”.
IP22 Against ingress of solid foreign objects
≥12.5mm diameter, Against dripping(15° tilted)
Follow operating instructions
6
2.4 About the product
Product name: Bluetooth Clinical Electrical Thermometer
Software release version：V1
Product model:
Model and Configuration see the table below.
1. On/Off button
On/Off：long press it to achieve this function.
When you want to take your temperature again, shortly
press it to re-measure your temperature.
2. Display screen
It visually displays the temperature measurement results.
3. Indicator light
Green light: it means your body temperature is normal.
Yellow light: it means you have a moderate fever.
Red light: it means you have a ultra high fever.
4. Probe tip
No. Model
Temperat
ure
measure
ment
function
Bluetooth
transmissio
n function
1DT1 √ √
2DT2 √ ×
1
2
3
4
7
It can measure the temperature.
2.5 Screen display information
Temperature
display
Unit/
Measurement
8
3. Using the thermometer
3.1Charge the Battery
Use the USB cable to charge the product. Connect the USB
cable to a USB charger or to the PC. There will be a battery
logo flash on the device when charging.When the battery is
low,the display screen will display a low power prompt.
Note: The device cannot be used during charging.When
charging, you must use a class
Ⅱ
adapter conforming
to IEC/EN 60601-1, and the output is DC 5V 1A. If it
is not followed, there may be a risk of electric shock.
3.2Before Measurement
1. Please long press the on key to start the product.
2. Display history
The history record appears on the screen,indicating that
the value is the last measured temperature.
9
3.3Measurement
Note:
Before measuring temperature, please clean the temperature
measuring head with or rubbing alcohol. Rinse it with cool water.
The thermometer supports measuring temperature of multiple body
parts.
For the infants under 3 months old, it is recommended to measure
rectal temperature.
Please follow the below instructions.
Measuring oral temperature
1. With your mouth open, put the temperature measuring head
under your tongue.
2. Close your lips gently around the thermometer.
3. Keep the thermometer under your tongue until the digital
thermometer beeps.
Measuring axillary temperature
1. Put the temperature measuring head securely in your armpit.
2. Hold your arm down tightly at your side.
3. Keep the thermometer in your armpit until the digital
thermometer beeps.
Measuring rectal temperature
1. Lubricate the probe tip with a water-soluable jelly for easier
insertion; do not use petroleum jelly,as it may cause an inaccurate
reading. Gently insert the probe tip no more than 1/2 inch into the
rectum.
10
3.4After Measurement
1. When the buzzer emits a beep sound(Beep-short
sound) , it indicates that the temperature measurement
is finished. The display "°C/
℉
" stops blinking, and the
displayed temperature value is the result of the current
body temperature.
Note:
When the temperature measured by the device is lower than
35
℃
or 95
℉
, the screen will display "LOW"with beep-long
sound.
When the temperature measured by the device is higher
than 41
℃
or 105.8
℉
, the screen will display "HIGH"with
beep-long sound.
2. Turn off the thermometer: press and hold (> 0.5
seconds) to switch the thermometer off.
3. If no operation is performed for more than 3 minutes,
the thermometer will automatically turn off. It is
recommended to manually turn off the thermometer
after the temperature measurement to extend the
battery life.
Ce manuel convient aux modèles suivants
2
Table des matières
