VEVOR WL-1000GV Manuel utilisateur
Technical Support and E-Warranty Certificate www.vevor.com/support
WOOD LATHE
INSTRUCTION MANUAL
MODEL: WL-1000GV
We continue to be committed to provide you tools with competitive price.
"Save Half", "Half Price" or any other similar expressions used by us only represents an
estimate of savings you might benefit from buying certain tools with us compared to the major
top brands and doses not necessarily mean to cover all categories of tools offered by us. You
are kindly reminded to verify carefully when you are placing an order with us if you are
actually saving half in comparison with the top major brands.
- 1 -
MODEL:WL-1000GV
Have product questions? Need technical support? Please feel free to
contact us:
CustomerService@vevor.com
NEED HELP? CONTACT US!
This is the original instruction, please read all manual instructions
carefully before operating. VEVOR reserves a clear interpretation of our
user manual. The appearance of the product shall be subject to the
product you received. Please forgive us that we won't inform you again if
there are any technology or software updates on our product.
WOOD LATHE
- 2 -
MATTERS NEEDING ATTENTION
The information contained in this handbook is intended as a guide to the
operation of these machines and does not form part of any contract.The
data it contains has been obtained from the machine manufacturer and
from other sources. We strive to ensure the accuracy of this information
and try to verify each item and each data, but we cannot guarantee the full
accuracy of the information, which means that the equipment supply may
differ in detail from the description of the instructions. Furthermore,
development of the machine may mean that the equipment supplied may
differ in detail from the descriptions herein. The responsibility therefore lies
with the user to satisfy himself that the equipment or process described is
suitable for the purpose intended.
QUALITY ASSURANCE
We will make every effort to ensure the quality of our products, and we
promise to consumers that we will guarantee our products for one year,
except for machine damage caused by improper operation of customers,
and accidents resulting therefrom, or abnormal wear and damage caused
by lack of maintenance.
In order to fulfill the warranty commitment, the product or part with quality
problems, please return to us for verification, postage prepaid. Goods sent
back should be accompanied by a note of the date of purchase and a
written explanation of the quality of the product. After our inspection and
confirmation, we will repair or replace their products, or refund the payment;
If we fail to provide repair or replacement in a timely manner, we shall bear
the costs arising from the repair or replacement of the products; If the
damage is not due to the quality of the product, but due to the user's
improper operation or other reasons, the cost shall be borne by the
customer .
- 3 -
Our company reserves the right to make changes to this specification and
product specifications. We will make continuous efforts to improve the
quality of our products.
All rights reserved. Reproduction or reproduction is not allowed without
permission.
SAFETY WARNING
Symbol
Symbol Description
Warning - To reduce the risk of injury, user must read instructions
manual carefully.
This symbol, placed before a safety comment, indicates a kind of
precaution, warning, or danger. Ignoring this warning may lead to an
accident. To reduce the risk of injury, fire, or electrocution, please
always follow the recommendation shown below.
Do not overload the machine
Provide good stability and keep the balance at all times
Avoid abnormal working postures! Make sure you stand squarely and
keep balance at all times.
Always stay focused when working. Reduce distortion sources in your
working environment. The operation of the machine when being tired,
as well as under the influence of alcohol, drugs or concentration
influencing medicaments is forbidden.
Do not climb onto the machine!
The machine must be operated only by trained persons (knowledge
and understanding of this manual), which have no limitations in motor
skills compared with conventional workers.
Do not allow other people, particularly children, to touch the machine or
the cable. Keep them away from your work area.
Make your workshop childproof.
Make sure there is nobody present in the dangerous area. The
minimum safety distance is 2m
Wear suitable work clot
- 4 -
Danger!
Risk of personal injury or environmental damage! Risk of electric
shock! Risk of personal injury by electric shock!
Alternating current
Never grab into the running machine!
Remove chips and workpiece parts only if the machine is standing still!
Never stop workpieces with the hand during run out!
Never take measurements on a rotating workpiece!
Do not wear safety gloves!
Warning- Be sure to wear ear protectors when using this product.
Warning- Be sure to wear eye protectors when using this product.
Warning- Be sure to wear dust masks when using this product.
Wear suitable work clothes! Do not wear loose clothing or jewelry as
they might get caught in moving parts and cause severe accidents!
Wear a hair net if you have long hair.
Loose objects can become entangled and cause serious injuries!
Never leave the machine running unattended! Before leaving the
working area switch the machine off and wait until the machine stops.
Always disconnect the machine prior to any actions performed at the
machine.
Avoid unintentional starting
Do not use the machine with damaged switch
The plug of an electrical tool must strictly correspond to the socket. Do
not use any adapters together with earthed electric tools
- 5 -
Each time you work with an electrically operated machine, caution is
advised! There is a risk of electric shock, fire, cutting injury;
Protect the machine from dampness (causing a short circuit)
Use power tools and machines never in the vicinity of flammable liquids
and gases (danger of explosion)
Check the cable regularly for damage
Do not use the cable to carry the machine or to fix the workpiece
Protect the cable from heat, oil and sharp edges
Avoid body contact with earthed
Before start working remove any nails and other foreign bodies from
the workpiece
Keep any machine that is not being used out of reach of children
This product is of protection class III.
FCC statement:
This device complies with Part 15 of the FCC Rules. Operation is
subject to the following two conditions:(1)This device may not cause
harmful interference, and (2)this device must accept any interference
received, including interference that may cause undesired operation.
Disposal information:
This product is subject to the provision of European Directive
2012/19/EC. The symbol showing a wheelie bin crossed through
indicates that the product requires separate refuse collection in the
European Union. This applies to the product and all accessories
marked with this symbol. Products marked as such may not be
discarded with normal domestic waste, but must be taken to a
collection point for recycling electrical and electronic devices
- 6 -
WARNING: Read all safety warnings, instructions, illustrations and
specifications provided with this machine. Failure to follow all instructions
listed below may result in electric shock, fire and/or serious injury.
Save all warnings and instructions for future reference.
1.The machine tool should be used by experienced personnel. If you are
not familiar with the operation process of the lathe, do not use the
machine tool at will. Use the instructions before operating.
2.Before starting the machine tool, the safety cover should be in the correct
position.
3.Before starting the machine tool, please check whether the tool rest
wrench and chuck key are removed.
4.Prevent the machine from starting accidentally. Turn off the motor power
before clamping the workpiece or tool.
5.Don't force cut. Cutting according to the set cutting speed, cutting depth
and feed speed.
6.Use the right tools. Use the correct tool or workpiece for machining.
7.Keep the tool sharp and clean to ensure normal and safe operation.
Lubricate and replace accessories regularly.
8.Before adjusting or repairing the machine, be sure to disconnect the
power supply.
9. Please check the safety performance of the machine before starting it.
Check the performance of all moving parts. All parts must be installed
correctly. Damaged parts must be repaired promptly.
10. When the machine is running, the operator shall not leave.
11. Keep the working place clean, dirty working environment is easy to lead
to accidents.
12. Do not use the machine in dangerous environment.
Do not work in damp places. Ensure that electrical components are
protected from moisture. Keep good lighting.
13. Children are prohibited from entering the work site, and non-operating
personnel should keep a safe distance from the work area.
14. To keep children out of the work area. The door should be locked when
leaving the workshop.
- 7 -
15. Dress appropriately. Don't wear loose clothing, gloves, ties, rings,
bracelets, jewelry, etc. To be on the safe side, For the sake of safety，
wearing non-slip shoes. If you have long hair, please wear a work hat.
16. Wear protective glasses when operating.
17. Pay attention to where you stand and keep your balance at all times.
18. Do not place your hands near the moving parts of the machine.
19. Do not perform any setting operations while the machine is running.
20. Read and understand all warning signs posted on the machine.
21. This manual is intended only to familiarize customers with the operation
of the machine and is not a training manual.
22. Please obey these warnings or serious injury may result.
23. The machine will produce some harmful chemicals in the work of dust,
sawing, grinding and drilling produced by grinding. To reduce the harm
of these chemicals, please work in a well-ventilated place and wear
safety devices. Such as particulate filter masks.
Remaining risk factors
WARNING
It is important to ensure that each machine has remaining
risks.
In the execution of all work (even the simplest) greatest
attention is required. Safe working depends on you!
Even if the machine is used as required it is still impossible to eliminate
certain residual risk factors totally. The following hazards may arise in
connection with the machine´s construction and design:
Risk of injury to the hands / fingers by the rotating workpiece during
operation.
Risk of injury due to sharp edges of the workpiece, especially in
non-fixed with a suitable tool / device workpiece.
- 8 -
Risk of injury: hair and loose clothing, etc. can be captured and wound
up! Safety regulations must be observed with regard to clothing.
Risk of injury due to contact with live electrical components.
Risk of injury due to dust emissions, treated with harmful agents
workpieces
Risk of injury to the eye by flying debris, even with safety goggles.
Risk of injury to the hearing by prolonged labor without hearing
protection.
Kickback is a sudden reaction. This causes the ejection of the tool in the
direction of the operator.
These risk factors can be minimized through obeying all security and
operation instructions, proper machine maintenance, proficient and
appropriate operation by persons with technical knowledge and
experience.
TECHNICAL PARAMETER
Voltage 230V / 50 Hz 110V / 60 Hz
Motor Power 750W
（50 Hz
Motor No-load Speed ）1490 r/min
（60 Hz
Motor No-load Speed ）1790 r/min
Spindle Speeds （50 Hz）680-2520 r/min ±10%
Spindle Speeds （60 Hz）700-2600 r/min ±10%
Max. Turning Diameter Ø 350 mm
Spindle Taper MT1
Spindle Thread M18
Distance between Centers 960 mm
Tailstock Spindle Travel 80 mm
Taper in Tailstock Spindle MT1
Weight N.W：63 kg; G.W：83.76 kg
Package Size 1490 x 410 x 572 mm
The general information given in this specification is not binding.
- 9 -
Know Your Wood Lathe: (Fig. 1 )
PART NO.
DESCRIPTION
QTY
1
Stand
1
2
Machine Bed
1
3
Switch
1
4
Head Stock
1
5
Digital Indicator
1
6
Spur Center
1
7
Light
1
8
Tool Rest
1
9
Copying Device
1
10
Living Center
1
11
Tailstock
1
12
Handwheel
1
13
Digital Indicator
1
14
Speed Controller
1
15
Power Cord
1
Table des matières
Autres manuels VEVOR Tour
