VEVOR Y13 Manuel utilisateur
Technical Support and E-Warranty Certificate www.vevor.com/support
FURNITURE DOLLIES
MODEL: Y13
We continue to be committed to provide you tools with competitive price.
"Save Half", "Half Price" or any other similar expressions used by us only represents an
estimate of savings you might benefit from buying certain tools with us compared to the major
top brands and doses not necessarily mean to cover all categories of tools offered by us. You
are kindly reminded to verify carefully when you are placing an order with us if you are
actually saving half in comparison with the top major brands.
- 1 -
MODEL: Y13
Have product questions? Need technical support? Please feel free to
contact us:
Technical Support and E-Warranty Certificate
www.vevor.com/support
NEED HELP? CONTACT US!
This is the original instruction, please read all manual instructions
carefully before operating. VEVOR reserves a clear interpretation of our
user manual. The appearance of the product shall be subject to the
product you received. Please forgive us that we won't inform you again if
there are any technology or software updates on our product.
FURNITURE DOLLIES
- 2 -
SAFETY INSTRUCTIONS
WARNING:
1. Please do not put it near flammable materials.
2. It is forbidden to carry people under any condition.
3. This product cannot be used to go up or down stairs.
4. Overload is strictly prohibited.
5. Don't move too fast when passing pothole areas.
SAVE THESE INSTRUCTIONS
MODEL AND PARAMETERS
Model: Y13
Material: Alloy Steel
Product size: Dollies length adjustment range is 17 to 28in, width 2in.
Load capacity: The normal load is 110 pounds, and the maximum load
does not exceed 330 pounds.
- 3 -
ASSEMBLY AND USE
1. Attach non-slip pads to both ends of the support surface.
2. Measure the width of the furniture.
3. Adjust the length of the dollies according to the measured furniture
width and tighten the hand screw nut.
- 4 -
4. Put the furniture on the dollies and push it to the desired position.
5. Press the brake on the dollies to prevent it from sliding.
- 5 -
MAINTENANCE
1. Avoid prolonged exposure to the sun to avoid aging.
2. Inspect accessories for wear, cracks and other damage before use, and
replace defective accessories immediately.
Sanven Technology Ltd.
Address: Suite 250, 9166 Anaheim Place, Rancho Cucamonga, CA 91730
Made In China
Table des matières
Autres manuels VEVOR Jack
VEVOR
VEVOR EJ3500B Manuel utilisateur
VEVOR
VEVOR TJD-12000SP-F Manuel utilisateur
VEVOR
VEVOR EJ3550B Manuel utilisateur
VEVOR
VEVOR TJD-7000S Manuel utilisateur
VEVOR
VEVOR SJ25 Manuel utilisateur
VEVOR
VEVOR MJ-1500B-DWJ Manuel utilisateur
VEVOR
VEVOR HJ-T120 Manuel utilisateur
VEVOR
VEVOR TJA-3000S Manuel utilisateur
VEVOR
VEVOR SD0601 Manuel utilisateur
VEVOR
VEVOR QJD-01-012A Manuel utilisateur
