Veto 160m Manuel utilisateur
2.4'' High
Definition LED
Voice Record
MP4
16GB SD Card
Professional APP
with CAD Sketch
640 x 480
Video Record
2 million Pixels
and 4 times
Zoom Camera
2017-A5
160m 200m
CONTENTS
4
5
5
5
6
6
7
7
7
7
8
8
8
9
9
9
9
10
11
12
12
13
13
14
14
15
16
16
16
17
18
19
19
19
20
21
22
23
23
25
25
25
25
26
26
26
27
27
29
29
29
30
30
31
32
32
32
34
36
37
Auxiliary Function
• Digital Horizontal Bubble
• Camera Measuring Assistant
• Delay Measurement
• Staking-out
• Angle
Record
• Digital Horizontal Bubble
Media Function
• Camera
• Video
Menu
• Music
• Video
• Taping
• Picture
• System Settings
• Time
• Bluetooth
• Light
• About Us
APP
• Professional CAD Sketch
Connect to Computer
• Connect to PC
• Docs in SD card
Technical Information
Errors
Routine Maintenance
Packing List
Display
• Main Interface
• System Settings
Keyboard
• Keyboard
Battery
• Battery Installation
• Battery Charging
Power On/Off
Basic Settings
• Unit Setting
• Reference Point Setting
Function Description
• Single Distance Measurement
• Continuous Measurement
• Area Measurement
• Volume Measurement
• Pythagoras
1. Calculate the Vertical and Horizontal Distance
2. Calculate the Vertical Distance
3. Calculate the Hypotenuse
4. Calculate the Third Side of Triangle
5. Calculate a Length of Vertical Distance
6. Calculate the Area of Triangle
7. Right Trapezoid Measurement
Calculation
• Distance Addition
• Distance Subtraction
• Area Addition & Subtraction
• Volume Addition & Subtraction
Packing List
Laser distance meter Portable bag Hand StrapAA Rechargable Battery USB Connector
Reflector
User' s manual
2.4''High
DefinitionLED
VoiceRecord
MP4
16GBSD Card
ProfessionalAPP
withCAD Sketch
640x 480
VideoRecord
2million Pixels
and4 times
ZoomCamera
2017-A5
160m 200m
>1/4 S
Please read all of the operational guide and safety regulations in this manual before operation.
Improper operations without complying with this manual guided could cause damage to the
device, influence on measurement result or bodily injury to the user.
The instrument is not allowed to disassemble or repair in any ways. It is forbidden to do any illegal
modification or performance change for laser emitter. Please keep it out of reach of children and
avoid using by any irrelevant personnel.
It is strictly prohibited to shoot eyes or other parts of body with the laser; it is not allowed take the
laser to shoot any objects' surface with strong reflecting.
Due to electromagnetic radiation interference to other equipment and devices, please don't use the
meter in the plane or around medical equipment, don't use it in inflammable, explosive
environment.
Discarded batteries or meter device shall not be processed just like household garbage, please
handle them in line with related law and regulations.
Any quality issues or any questions on the meter, please contact local distributors or manufacturer
in time, we are ready to offer solutions for you.
Please read the safety regulations and operation guide carefully before operating.
Professional casts quality and good quality
gets reputation
Safety Regulations
Please check your accessories with below list.
Display
•Power
•Measuring Mode 1
•Measuring Mode 2
•Measuring Mode 3
•Main Display Area
•Items
•Laser
•Angle
•Reference Point
•Result Display 1
•Result Display 2
•Result Display 3
•Unit
•Bluetooth
•Measuring Mode
PIC 1 Main Interface
PIC 2 System Settings
•Option Box
•Backlight Time
•Laser lasting Time
•Power Off Time
•Sound
•Length Unit
•Angle Unit
•Self-calibration
Keyboard
Main Interface
System Settings
PIC 3 Keyboard
•Power On /
Measure
•Plus
•Area/Volume/
Pythagoras
•MENU •Staking-out/
Digital Bubble
•Reference Point/
Delay Measuring
•Equal
•Minus
•Camera
•Photo/Video
•Record •Power Off/
Clear off
Short press to Menu. Enter System Settings.
Press and to reach the item . Short
press to make the selection box green. Then
press and to select the unit you need. The
default unit is 0.000m. There are 8 different units
for options.
Reference point setting
The device get 4 different reference points. System default reference point is bottom.
Press to select the reference point.
Middle(Screw Hole)
Top
Bottom Tail-Board
Long press to start the device.
Long press to turn off the device. The device can also turn off automatically in 150s
without any operation. (150s is default value, user can set the time in the System Settings.)
Unit Setting
Battery Basic Settings
Power On/Off
Battery Installation
Battery Charging
Discharge the battery door, and place battery according to correct
polarity, then cover the battery door.
1.2V 2400mAh AA Ni-mh battery is recommended. A USB cable is
included in the accessories bag.
Please remove the batteries when the device is off work in order to
protect the device from corrosion.
The device is accompany with rechargeable batteries.
Please recheck if the batteries in the battery cabinet is rechargeable
batteries before you connect it to the power supply for charging. If
the batteries are not rechargeable, the device will not start charging.
The symbol will show in greening while charging. Heating is
normal while charging. Symbol means charging completed.
Area Measurement
Continuous Measurement
The user can use this mode to find the target distance without frequent operation.
1) Long press under distance measuring mode to start continuous measuring mode.
Maximum and Minimum value will be shown on the screen. Present result displays in
major display area.
2) Short press or to quit.
Short press button twice to .
Press button for one edge (W)
Press button for the second edge (L)
Press button for the third edge (H)
Function Description
Single Distance Measurement
1) Press under distance measuring mode, laser shoots and focus the target.
2) Press again to measure. It can show 4 results in 4 lines on the display, including
the bottom line newest result and 3 history results.
3) Short press to delete the history data.
Volume Measurement
Short press once to .
Press once for length;
Press again for width.
The device calculates the area and perimeter . Short press to clear off last
result and measure again when you make a wrong operation. Long press button to
save the result.
Device calculates the volume , base area , flank area and base perimeter .
Short press to check more results.Short press to clear off the last result and
measuring again when you make a wrong operation.Long press button to save the result.
Short press three times to .
Press to get the length of Hypotenuse c and angle α ;
The device calculates the vertical distance b and horizontal distance a .
Short press four times to .
press to get length of c;
press to get length of a;
The device calculates the vertical distance b .
Calculate the Vertical and Horizontal Distance
1
Calculate the Vertical Distance
2
1. Calculate the Vertical and Horizontal Distance
2. Calculate the Vertical Distance
3. Calculate the Hypotenuse
4. Calculate the Third Side of Triangle
5. Calculate a Length of Vertical Distance
6. Calculate the Area of Triangle
7. Right Trapezoid Measurement
User can choose different modes according to the condition by press .
Pythagoras
There are 7 Pythagoras calculations.
Calculate the Area of Triangle
6
Short press six times to .
press to get length of a;
press to get length of h;
press to get length of b;
The device calculates the length of c .
The device calculates the area of the triangle,
the angle α, and the perimeter of the triangle.
Press to check more results.
Calculate the Hypotenuse
3
Short press five times to .
press to get length of a;
press to get length of b;
The device calculates the length of Hypotenuse c .
Calculate the Third Side of Triangle
4
Calculate a Length of Vertical Distance
5
Short press seven times to .
press to get length of c;
press to get length of l1;
press to get length of a;
The device calculates the distance of l2 .
Short press eight times to .
press to get length of a;
press to get length of b;
press to get length of c;
Press to save the result.
Remark: If "ERR 5" shows in the display while measuring, that means the previous
measuring results are not accompany to the rule of triangle. For example,
the hypotenuse is shorter than a leg. Please remeasure.
Right Trapezoid Measurement
7Calculation
Short press nine times to .
press to get length of L1;
press to get length of L2;
α is the angle between the diagonal L2and the line L4.
The device calculates the area of the Trapezoid S , the length of L3, length of
L4 , and angle β ;
Press to check more results.
1. Press to measure a distance;
2. Use button to do addition calculation.
3. Continuous addition is available under this mode.
Distance Addition
1. Press to measure a distance;
2. Use button to do subtraction calculation.
3. Continuous subtraction is available under this mode.
Distance Subtraction
Remark: User can short press to cancel the last addition or subtraction
movement. Short press twice to quit.
1. Get an area result;
2. Press , and "+" shows on display. Get the second area result;
3. Short press to get the sum of areas.
4. Repeat the operation of step 2 before step 3 to add more areas.
Follow the same steps for subtraction. Follow the same steps for subtraction.
1. Get an volume result;
2. Press , and "+" shows on display. Get the second volume result;
3. Short press to get the sum of volumes.
4. Repeat the operation of step 2 before step 3 to add more volumes.
Area Addition & Subtraction
PIC 4 first area
measurement
PIC 5 second area
measurement
PIC 6 sum of areas
Volume Addition & Subtraction
PIC 7 first volume
measurement
PIC 8 second volume
measurement
PIC 9 sum of volumes
Ce manuel convient aux modèles suivants
1
Table des matières
Autres manuels Veto Instrument de mesure
Manuels Instrument de mesure populaires d'autres marques
Endress+Hauser
Endress+Hauser Proline Promag 50 Caractéristiques techniques
Siemens
Siemens SITRANS F Coriolis FCT030 Manuel de la liste des pièces
KLINGER
KLINGER CMF V Series Manuel utilisateur
EXFO
EXFO FTB-2 Manuel d'exploitation et d'entretien
Keysight
Keysight M8290A Manuel utilisateur
ADTEK
ADTEK MW-5 Manuel utilisateur