Vertiv AVOCENT SV Series Manuel utilisateur

AVOCENT® SV SERIES SWITCHES

SVM100DPH DESKTOP MATRIX

Quick Installation Guide

590-2322-501A 1

1. Connecting local

peripherals

Ensure all computers and

displays are turned o.

Plug the display cables into the

CONSOLE primary (1) and

secondary (2) display ports on

the back of the switch. The

switch uses a combination

DisplayPort (DP) and HDMI

connector to enable either

video format to be used as

input or output.

Plug the USB keyboard and

mouse and audio cables into

the appropriate CONSOLE

ports on the back of the switch.

If desired, connect the Cybex™

Active Front Panel (AFP) KVM

remote unit to the RCU port to

control your switch remotely.

Contact your Vertiv

representative for more

information.

2. Connecting

each computer

Connect a USB cable from

each computer to the

keyboard/mouse USB Type-B

port on the switch.

Plug the display cable from the

corresponding computer into

the appropriate port on the

switch.

If applicable, connect audio from

your computer to your switch

and

connect a USB 3.0 cable

from the computer to the USB

3.0 Type-B port on the switch.

Repeat for all computers.

3. Turning on the displays,

switch and computers

NOTE:

Installation of local

peripherals to the switch

console must occur prior to

powering up the switch.

Turn power on to the

connected displays.

Using an appropriate wall-

socket adaptor, plug the

provided power adaptor or

cable into the switch, and plug

the other end into a wall outlet.

The video diagnostic LED

indicates the Extended Display

Identication Data (EDID)

information has been

successfully read from the

display and stored in memory.

The EDID is only read in the

rst few seconds after the

switch is powered on.

• O - no EDID detected

• Blinking - reading EDID

• On - EDID received

NOTE: Vertiv recommends

using displays with the same

native resolution. However, if

you are using dierent

resolution displays, connect

the lower native resolution

display to console video port 1.

EDID is only read from console

video port 1 in the rst few

seconds after the switch is

turned on. Hot-plugging or

swapping displays while the

switch is on is not supported.

To change a display, power

cycle the KVM switch.

Turn on the computers. Ensure

the peripherals for each

computer are connected and

working properly. Repeat for all

computers.

Avocent® SVM180DPH Desktop Matrix Switch Shown

AVOCENT® SV SERIES SWITCHES

Quick Installation Guide

To contact Vertiv Technical Support: visit www.Vertiv.com

names, trademarks or registered trademarks of their respective owners. While every precaution has been taken to ensure accuracy and completeness here, Vertiv Group Corp. assumes

no responsibility, and disclaims all liability, for damages resulting from use of this information or for any errors or omissions. Specications, rebates and other promotional oers are subject

to change at Vertiv’s sole discretion upon notice.

2 590-2322-501A

4. Switching between

computers

Press the appropriate front

panel buttons on the switch to

select a computer for the

primary and secondary

displays. The buttons of the

selected computers illuminate.

Keyboard/mouse, audio and

USB 3.0 focus can be switched

between the primary and

secondary computer with the

center control buttons.

Cursor navigation switching,

enabled by default, switches

keyboard/mouse focus

between the primary and

secondary displays by moving

the mouse across the display

edge.

Cables

Use Vertiv cable kits with your

switch to ensure optimal security

and performance.

Contact a Vertiv representative for

ordering details.

Primary keyboard/mouse

control indicator

Front Panel Avocent® SVM180DPH Desktop Matrix Switch Shown

Selected primary

channel indicators

Selected secondary

channel indicators

Audio freeze indicator

Secondary keyboard/mouse

control indicator

USB 3.0 freeze indicator

USB 3.0

ports

Ce manuel convient aux modèles suivants

Autres manuels Vertiv Changer

Vertiv

Vertiv GEIST SA1-01003LNB Manuel utilisateur

Vertiv

Vertiv LIEBERT vNSA8-iCOM Manuel utilisateur

Vertiv

Vertiv Liebert STS2/PDU Manuel utilisateur

Vertiv

Vertiv Cybex SC 840D Manuel utilisateur

Vertiv

Vertiv Cybex SC 945XD Manuel utilisateur

Vertiv

Vertiv CYBEX SC Series Manuel utilisateur

Vertiv

Vertiv SCKM180 Manuel utilisateur

Vertiv

Vertiv Cybex SC KM 120 Manuel utilisateur

Vertiv

Vertiv CYBEX SC Series Manuel utilisateur

Vertiv

Vertiv AutoView AV104 Instructions d'installation et d'entretien

Vertiv

Vertiv CYBEX SC Series Manuel utilisateur

Vertiv

Vertiv UL891 Instructions d'installation et d'entretien

Vertiv

Vertiv Avocent SV Instructions d'installation et d'entretien

Vertiv

Vertiv Cybex SC 820DP Manuel utilisateur

Vertiv

Vertiv CYBEX SC Series Manuel utilisateur

Vertiv

Vertiv SCKM120 Feuille d'instructions

Vertiv

Vertiv Liebert STS2 Manuel utilisateur

Vertiv

Vertiv Avocent SwitchView 300 Series Instructions d'installation et d'entretien

Vertiv

Vertiv AVOCENT SV 340H Manuel utilisateur

Vertiv

Vertiv Avocent MergePoint Unity Instructions d'installation et d'entretien

Vertiv

Vertiv Cybex SC 840 Manuel utilisateur

Vertiv

Vertiv EXL S1 1000A Manuel utilisateur

Vertiv

Vertiv SC 940 Manuel utilisateur

Vertiv

Vertiv Liebert NXL SCCi Manuel utilisateur

Manuels Changer populaires d'autres marques

URC

URC Total Control MFS-8 Manuel utilisateur

Azbil

Azbil HPQ-D11 Manuel utilisateur

Sony

Sony DFS-900M Manuel utilisateur

SICK

SICK i17S Manuel utilisateur

F&F

F&F SZR-277 Manuel utilisateur

Shure

Shure UAMS/BK Manuel utilisateur

Dräger

Dräger X-zone Switch Off Manuel utilisateur

Asco

Asco Joucomatic 349 Series Manuel utilisateur

BT Mini Hub Manuel utilisateur

D-Link

D-Link DES-1226G Manuel utilisateur

Johnson Controls

Johnson Controls FS80-C Manuel utilisateur

Alcatel-Lucent

Alcatel-Lucent 7450 ESS-12 Manuel utilisateur

MicroNet

MicroNet SP1200A Manuel utilisateur

Ruijie

Ruijie RG-PF2920 Series Manuel d'installation et d'exploitation

Altinex

Altinex DA1914SX Manuel utilisateur

MiLAN

MiLAN MIL-SM2401M Manuel utilisateur

RJM

RJM MASTERMIND PBC/6X Manuel utilisateur

Atlas

Atlas MMK-KVM8 Manuel utilisateur