Vertiv ES-HND200I-EI Instructions d'installation et d'entretien
Network Camera V4.1.0
ES-HND200I-EI
Installer/User Guide
Vertiv | Network Camera Quick Operation Guide | v01 | UD.6L0201D0140A02
1.0 Appearance Description ...................................................................................1
1.1 Camera Description....................................................................................................................................1
1.1.2 Camera Wiring Diagram .........................................................................................1
2.0 Installation .......................................................................................................... 2
2.1 Ceiling Moungting......................................................................................................................................2
2.2 In-Ceiling Moungting .............................................................................................................................5
3.0 Setting the Network Camera over the LAN............................................... 9
3.1 Modify device info.....................................................................................................................10
4.0 Accessing via Web Browser .........................................................................12
CONTENTS
ABOUT THIS DOCUMENT
This manual applies to ES-HND200I-EI series cameras. This manual may contain several technical incorrect places or printing
errors, and the content is subject to change without notice. The updates will be added to the new version of this manual. We
will readily improve or update the products or procedures described in the manual.
DISCLAIMER STATEMENT
“Underwriters Laboratories Inc. (“UL”) has not tested the performance or reliability of the security or signaling aspects of this
product. UL has only tested for fire, shock or casualty hazards as outlined in UL’s Standard(s) for Safety, UL60950-1. UL
Certification does not cover the performance or reliability of the security or signaling aspects of this product. UL MAKES NO
REPRESENTATIONS, WARRANTIES OR CERTIFICATIONS WHATSOEVER REGARDING THE PERFORMANCE OR RELIABILITY
OF ANY SECURITY OR SIGNALING RELATED FUNCTIONS OF THIS PRODUCT.
Save these instructions
This manual contains important instructions that should be followed during installation and maintenance of the Network
Camera V4.1.0 ES-HND200I-EI.
Thank you for purchasing our product. If there are any questions, or requests, please do not hesitate to contact the dealer.
0400031020820
1
Vertiv | Network Camera Quick Operation Guide | v01 | UD.6L0201D0140A02
1.1 Camera Description
1.0 APPEARANCE DESCRIPTION
NO. DESCRIPTION
110M/100M self-adaptive Ethernet
interface
2INITIAL SET: Reset button
3AUDIO OUT: Audio output interface
4MIC IN: Audio input interface
5D+, D-: RS-485 interface
61A, 1B, 2A, 2B: Alarm output interface
7IN1, GND, IN2, GND: Alarm input inter-
face
8Power supply interface
1.1.2 Camera Wiring Diagram
1.1.1 Overview
Note: After the powering on of the camera, pressing
and holding the INITIAL SET button for about 10
seconds can reset all the parameters to the default
settings.
2
Vertiv | Network Camera Quick Operation Guide | v01 | UD.6L0201D0140A02
2.0 INSTALLATION
NOTES:
Read the following contents carefully before the installation.
Make sure that all the related equipment is power-o during the installation.
Check whether the power supply is matched with your AC outlet to avoid damage.
Do not place the camera in extremely hot or damp environment. To avoid heat accumulation, good
ventilation is required for a proper operating environment. You may refer to the specification of the product
for the detailed information about installation environment.
If the product does not function properly, please contact your dealer or the nearest service center. Do not
disassemble the camera for repair or maintenance by yourself.
2.1 Ceiling mounting:
NOTE: If required, you can use a plier to remove one clip or both two clips (marked in dotted line in Figure
2-1) on the side of the back box and then route cables through the opening to secure the cables on the
ceiling.
Figure 2-1 Side Clips
3
Vertiv | Network Camera Quick Operation Guide | v01 | UD.6L0201D0140A02
Steps:
1. Use the screws to fix the mounting base to the ceiling; rotate the back box counterclockwise to secure it to
the mounting base; use the lock screw to secure the dome camera.
2. Loosen the set screws with the hex key (supplied) to remove the lower dome.
Figure 2-2 Mounting
Figure 2-3 Disassembling
4
Vertiv | Network Camera Quick Operation Guide | v01 | UD.6L0201D0140A02
3.) Connect the RCA analog video output with a monitor to view the image of the camera. Loosen the lens set
screw and pan, tilt or rotate the lens to get a desired surveillance angle. Adjust the lens focus to obtain a perfect
image. Fasten the lens set screw.
Figure 2-4 Image Adjusting
Figure 2-5 Image Adjusting
5
Vertiv | Network Camera Quick Operation Guide | v01 | UD.6L0201D0140A02
4. Reinstall the lower dome and tighten the screws.
Figure 2-6 Reinstall
1. Secure the mounting base to the in-ceiling mounting base with screws.
Steps:
2.2 In-ceiling mounting:
Figure 2-7 Mounting Base
6
Vertiv | Network Camera Quick Operation Guide | v01 | UD.6L0201D0140A02
2. Push the dome camera to the in-ceiling mounting base, rotate the dome camera for 10 degrees
counterclockwise and then fasten the lock screws to fix the camera.
Lock screw
Figure 2-8 Camera and Mounting Base
3. Cut a 176~180 mm diameter hole in the ceiling and push the dome camera with in-ceiling mounting base to the
hole.
NOTE: If required, you can use a plier to remove one clip or both two clips (marked in dotted line in Figure
2-1) on the side of the back box and then route cables through the opening to secure the cables on the
ceiling.
Figure 2-9 Installing
7
Vertiv | Network Camera Quick Operation Guide | v01 | UD.6L0201D0140A02
4. It is strongly recommended that you use a safety rope to secure the in-ceiling mounting base to the roof.
5. Fasten the lock screws to secure the dome camera.
Figure 2-10 Safety Rope
Lock screw
Lock screw
Figure 2-11 Fasten Screws
Table des matières
Autres manuels Vertiv Caméra de sécurité
