VERITAS NetBackup 5230 Manuel
Replacing the power cable: Veritas Appliance and Veritas 2U12
Storage Shelf
Document Number: 175
Version: 4.2 (05/04/2020)
Purpose
This document describes the process to replace the power cable for the Veritas 5230, 5240 and 5250
Appliances and the 2U12 Storage Shelf.
Affected appliance models
• 5230 Appliance
• 5240 Appliance
• 5250 Appliance
• Veritas 2U12 Storage Shelf
Electrical Safety
The static discharged by human bodies can damage static-sensitive components on the boards.
When installing and maintaining the equipment, observe appropriate electrostatic safety precautions
to prevent personnel injuries or device damage.
When operating a device in an electrostatic sensitive area, you must take electrostatic-discharge
(ESD)-preventive measures. These include wearing ESD-preventive gloves, an ESD-preventive wrist
strap, and ESD-preventive clothes to avoid personnel injury or device damage.
To prevent damage to the device, pay attention to the following during operations:
• Do not touch devices with bare hands because ESD from the human body may damage the
electrostatically sensitive elements on a board.
• When dealing with the server or any of the internal components, wear an ESD-preventive wrist
strap, ESD-preventive gloves, and ESD-preventive suit.
1
Veritas Appliance
Hardware Service Procedure
About removing and replacing the power cable
This document describes how to replace a Veritas Appliance or Veritas 2U12 Storage Shelf power
cable while the system is powered on. Before replacing an appliance power cable, ensure that one
of the power cables to the appliance must be operating at all times. If both power cables must be
removed at the same time, the shutdown procedure must be performed on the appliance before a
power cable is removed.
Similarly before replacing a Veritas 2U12 Storage Shelf power cable, ensure that one of the power
cables to each storage shelf must be operating at all times. If both power cables must be removed
at the same time on the storage shelf, ensure that there are no I/O operations on the appliance in
progress, and then turn off the storage shelf.
This repair can be accomplished with the appliance installed in the rack.
Note: If the appliance has attached storage shelves, the storage shelves do not need to be powered
down while the appliance is being serviced.
Figure 1 Veritas Appliance power supply socket locations
Figure 2 Veritas 2U12 Storage Shelf power supply socket location
2
HSP #175 Appliance and Storage Shelf Power Cable Replacement
Figure 3 Veritas 2U12 Storage Shelf power supply LED
Requirements
Use the following to verify the requirements of the service.
• Power cable
Locating and identifying the appliance or the storage shelf that
has the faulty power cable
The following procedure helps you to locate and identify the appliance or the storage shelf that has
the faulty power cable.
To locate and identify the appliance or the storage shelf that has the faulty power cable
1Have the customer take you to the unit with the failed component.
2Verify the NetBackup appliance serial number. The serial number begins with the letters SYM or
VTAS, and is located on a label on the rear panel of the appliance.
3Verify the Veritas 2U12 Storage Shelf serial number. The serial number appears on a plastic tab
that you pull out from Power Cooling Module 0 (PCM 0). The storage shelf serial number begins
with the letters SH.
3
HSP #175 Appliance and Storage Shelf Power Cable Replacement
Removing the power cable
Use the following procedure to remove the power cable.
To remove the power cable
1If you want to remove the faulty power cable from the NetBackup Appliance, do the following:
Warning: Swap one power cable at a time only. If you need to remove both power cables, make
sure that the appliance is turned off before you proceed.
Pull the faulty power cable from the appliance power supply socket. The LED on the power supply
shows an amber light when the power cable is faulty or when there is no power cable.
4
HSP #175 Appliance and Storage Shelf Power Cable Replacement
2If you want to remove the faulty power cable from the storage shelf, do the following in the order
listed:
Warning: Swap one power cable at a time only. If you need to remove both power cables, make
sure that the appliance is turned off before you proceed.
• On the Power Cooling Module, use the On/Off switch to turn off the power before you
disconnect the power cable.
• Disconnect the faulty power cable. The amber lights signify an AC and a DC failure. This may
happen when the power cable is faulty or when there is no power cable.
Installing the power cable
Use the following procedure to install the power cable.
To install the power cable
1Remove the replacement power cable from any wrapping.
5
HSP #175 Appliance and Storage Shelf Power Cable Replacement
2Ensure that the AC power supply input for the appliance is within one of these ranges:
• 100 - 127 VAC at 50/60 Hz, 8.2 A
• 200 - 240 VAC at 50/60 Hz, 4.4 A
3If you want to install the replacement power cable for the NetBackup Appliance, do the following:
• Connect the replacement power cable to the appliance power supply socket.
• Connect the other end of the cord to the appropriate AC power source as defined by the
customer.
4If you want to install the replacement power cable for the Veritas 2U12 Storage Shelf, do the
following:
Do the following in the order listed:
• Connect the power cord to the power supply socket.
• Connect the other end of the cord to the appropriate AC power source as defined by the
customer.
• On the Power Cooling Module, use the On/Off switch to turn on the power.
5The LED on the power supply should come on and turn green for the appliance and the storage
shelf respectively.
6
HSP #175 Appliance and Storage Shelf Power Cable Replacement
Autres manuels pour NetBackup 5230
4
Ce manuel convient aux modèles suivants
3
Table des matières
Autres manuels VERITAS Stockage
VERITAS
VERITAS NetBackup 5240 Manuel utilisateur
VERITAS
VERITAS NetBackup 5330 Manuel utilisateur
VERITAS
VERITAS 5150 Manuel
VERITAS
VERITAS NetBackup 5240 Manuel d'utilisation et d'entretien
VERITAS
VERITAS 3U16 Manuel
VERITAS
VERITAS 5150 Manuel utilisateur
VERITAS
VERITAS Access 3340 Manuel utilisateur
VERITAS
VERITAS 5150 Manuel
VERITAS
VERITAS NetBackup 5230 Instructions d'utilisation et de sécurité
VERITAS
VERITAS 5U84 Manuel
VERITAS
VERITAS NetBackup 5330 Manuel
VERITAS
VERITAS NetBackup 5330 Manuel
VERITAS
VERITAS Access 3340 Manuel
VERITAS
VERITAS 5U84 Manuel
VERITAS
VERITAS 5U84 Manuel
VERITAS
VERITAS 5360 Manuel utilisateur
VERITAS
VERITAS 5250 Manuel
VERITAS
VERITAS NetBackup 5240 Manuel
VERITAS
VERITAS Velocity 7330 Manuel
VERITAS
VERITAS Access 3340 Manuel
Manuels Stockage populaires d'autres marques
Spectra Logic
Spectra Logic T-Series Spectra T50e Manuel utilisateur
Panasonic
Panasonic LKM-F931-1 Manuel utilisateur
Tabernus
Tabernus Enterprise Erase E2400 Manuel utilisateur
Rocstor
Rocstor COMMANDER 3F series Manuel utilisateur
HP
HP P9000 Manuel utilisateur
Western Digital
Western Digital Ultrastar Data60 Manuel utilisateur