Verilux Planet Light PL04 Manuel utilisateur
PL04
Planet Light®
Energy Saving Natural Spectrum®
Floor Lamp
2
Dear Customer,
Thank you for purchasing the Planet Light® Energy
Saving Natural Spectrum® Floor Lamp. You have
received a quality product, backed by a one-year limited
warranty. As a Verilux customer, your satisfaction means
everything to us. We look forward to serving you now
and in the future.
Many other healthy lighting products are available
through our
catalog and online. Visit us on the web at
www.verilux.com
to request a free catalog and learn
more about all our quality Verilux products, or call our
toll-free number 1-800-454-4408.
Have a Bright Day!
Nicholas Harmon
President, Verilux, Inc.
3
SAVE THESE INSTRUCTIONS
Thank you for purchasing the Planet Light® Energy Saving Natural
Spectrum® Floor Lamp. Please read the following safety information
before using. To reduce the risk of fire, electrical shock or injury to
persons:
• Do NOT dismantle.
• Do NOT alter power cord.
• Turn off/unplug and allow to cool before replacing bulb or cleaning.
Important Safety Instructions
Warnings and Precautions
• For indoor use only.
• The lamp is an electrical device. DO NOT USE NEAR WATER.
• Before plugging in the lamp, check to make sure the voltage of the
wall socket does not exceed 120 volts.
• Not for use with light dimmers, timers, motion detectors or extension
cords.
• This product may cause interference with radios, cordless
telephones or devices that use a wireless remote control, such as
televisions. If interference occurs, move the product away from the
device, plug the product or device into a different outlet or move the
lamp out of the line of sight of the remote control receiver.
• Unplug from electrical outlet for extended periods of non-use or
during lightning storms to ensure protection of the electronics.
• WARNING: Do NOT use lubricating agent in assembly; please see
troubleshooting section if you are having difficulty assembling your
lamp.
• WARNING: Do not use the lamp outside or in wet locations such as
bathrooms. It is intended for indoor, dry use only.
• WARNING: This product contains Mercury in the bulb. Dispose of
bulb per local regulations.
4
Avertissements et Précautions
• Pour usage intérieur seulement.
• La lampe est un dispositif électrique. NE PAS UTILISER PRÈS DE
L’EAU.
• Avant de brancher la lampe, vérifier que la tension de la prise murale
ne dépasse pas 120 volts.
• Ne pas utiliser avec des gradateurs de lumière, des minuteries, des
détecteurs de mouvement ou des rallonges.
• Ce produit peut causer des interférences avec des radios, des
téléphones sans fil ou des appareils utilisant une télécommande
sans fil, telle qu’une télévision.
• Si des interférences se produisent, éloigner le produit de l’appareil,
brancher le produit ou l’appareil dans une autre prise ou encore
déplacer la lampe hors de la ligne de visée du détecteur de
télécommande.
• Débrancher de la prise électrique lorsque le produit ne sert pas
pendant de longues périodes ou lors d’orages électriques afin
d’assurer la protection des pièces électroniques.
• AVERTISSEMENT : Ne PAS utiliser de produit lubrifiant lors de
l’assemblage; voir la section de dépannage en cas de difficulté lors
de l’assemblage de la lampe.
• AVERTISSEMENT : Ne pas utiliser la lampe à l’extérieur ou dans
des endroits humides, telle qu’une salle de bain. La lampe doit être
uniquement utilisée à l’intérieur et dans un endroit sec.
• AVERTISSEMENT : Ce produit contient du mercure dans son
ampoule. Suivre les règlements locaux pour la mise au rebut de
l’ampoule.
5
HEADERGetting Started
Main Parts & Controls
A. Lamp Head
B. Gooseneck
C. Shaft
D. Lamp Base
E. Power Cord
F. Polarized Plug
G. Bulb
H. High/Off/Low Switch
A
F
CE
D
B
G
Close-up of Lamp Head
H
CAUTION:
DO NOT LIFT THE LAMP BY THE GOOSENECK. THE LAMP SHOULD
BE LIFTED BY THE SHAFT.
MISE EN GARDE :
NE PAS SOULEVER LA LAMPE PAR SON COL-DE-CYGNE. LA LAMPE
DOIT ÊTRE SOULEVÉE PAR LA TIGE.
6
HEADER
1. Remove all pieces from box. Locate the two Phillips head screws.
2. Detach the red plastic protective pieces and store them in the
event you need to return the lamp.
3. Important: To avoid scratching the metal shaft, do not use a sharp
object to cut the plastic covering. The clear plastic covering on the
shaft is specially designed to tear away easily.
Unpacking Your Lamp
IMPORTANT NOTE:
Remove red plastic protective pieces prior to assembly.
7
HEADERAssembly Instructions
Read Instructions Carefully Before
Assembly:
1. Connect the two ends of the Power
Cord (between the Base and the
Shaft) using the lock connectors.
2. Carefully tuck excess Power
Cord into the Shaft. DO NOT
CUT OR SHORTEN THE POWER
CORD.
3. Insert the Gooseneck and the
Shaft into the Base.
4. Check direction of the lamp and
the hole on the Base, then use
a Phillips Head Screwdriver (not
included) to tighten the screw into
the hole.
CAUTION: BE VERY CAREFUL
NOT TO PINCH ANY PART OF
THE CORD BETWEEN ANY
METAL PIECES.
MISE EN GARDE : PRENDRE
SOIN DE NE PAS PINCER LE
CORDON DANS DES PIÈCES
MÉTALLIQUES.
Fig. 1
8
HEADERAssembly Instructions cont.
5. To prevent damage during shipping, the Verilux bulb is surrounded
by protective padding. Carefully remove and dispose of the
protective padding. Check to ensure that the bulb is fully seated
and has not come loose from the socket during shipping. There
should be no gap between the bulb and socket.
6. Plug lamp into outlet and turn on. If bulb does not illuminate
instantly, please refer to the troubleshooting section of this manual.
9
HEADERBulb Replacement Instructions
Installation
1. Unplug lamp from power source.
2. Firmly hold the base (B) and push
bulb (C) into the socket (A).
3. Be sure the bulb is firmly seated in
the socket (see below) and snapped
into the metal bulb clip (D).
Removal
1. Unplug the lamp from the power
source.
2. Firmly hold the bulb base (B) and
pull the bulb (C) from the socket (A)
in an outward motion.
No
gap
Notice
large gap
Correctly seated bulb Incorrectly seated bulb
YES NO
C
B
A
C
B
A
D
CAUTION: ALWAYS UNPLUG LAMP BEFORE PERFORMING BULB
REPLACEMENT OR INSTALLATION.
MISE EN GARDE : TOUJOURS DÉBRANCHER LA LAMPE AVANT DE
REMPLACER OU DE POSER L’AMPOULE.
10
HEADERTroubleshooting
Before requesting service on your Verilux® lamp, please read the
following:
• Make sure all power connectors, cords and plugs are inserted fully
and securely.
• Be sure the bulb is securely seated into the socket (see page 9).
• Make sure there is power to the wall outlet or try another outlet.
• CAUTION: DISCONNECT LAMP BEFORE PERFORMING
ALIGNMENT ACTIVITY. MISE EN GARDE : DÉBRANCHER LA
LAMPE AVANT D’EFFECTUER SON ALIGNEMENT. Correct alignment
with screw holes can be accomplished by following these steps:
1. Always start with the base and work your way up the shaft,
attaching the head last.
2. Place your foot on the base of the lamp on the floor.
3. While holding the shaft with your hand, gently rock the unit back
and forth.
4. Shaft should ease into the socket and the screw holes will align.
Be sure the bulb is securely seated into the socket, repeat the bulb
installation process. CAUTION: DISCONNECT LAMP FROM OUTLET
PRIOR TO REPEATING THE BULB INSTALLATION PROCESS. MISE EN
GARDE : DÉBRANCHER LA LAMPE DE LA PRISE DE COURANT AVANT
DE POSER UNE NOUVELLE AMPOULE.
Autres manuels pour Planet Light PL04
1
Table des matières
Autres manuels Verilux Éclairage domestique
Verilux
Verilux HappyLight VTCP01 Manuel utilisateur
Verilux
Verilux Shelburne Deluxe VD05 Manuel utilisateur
Verilux
Verilux VD06 Manuel utilisateur
Verilux
Verilux VF08 Manuel utilisateur
Verilux
Verilux LED SmartLight VF09 Manuel utilisateur
Verilux
Verilux HappyLight Duo VT37 Manuel utilisateur
Verilux
Verilux Planet Light PL04 Manuel utilisateur
Verilux
Verilux LED SmartLight VD46 Manuel utilisateur
Verilux
Verilux VD08 Manuel utilisateur
Verilux
Verilux LED SmartLight VD46 Manuel utilisateur
Verilux
Verilux Heritage VD03 Manuel utilisateur
Verilux
Verilux VD017 Manuel utilisateur
Verilux
Verilux LED SmartLight VF09 Manuel utilisateur
Verilux
Verilux VF03 Manuel utilisateur
Verilux
Verilux HappyLight VT03 Manuel utilisateur
Verilux
Verilux VD04 Manuel utilisateur
Verilux
Verilux VF05 Manuel utilisateur
Verilux
Verilux Natural Spectrum ShopLight VC01HH1 Manuel utilisateur
Verilux
Verilux Planet Light PL05 Manuel utilisateur
Verilux
Verilux Modern Deluxe Natural Spectrum Manuel utilisateur
Manuels Éclairage domestique populaires d'autres marques
JONATHAN Y
JONATHAN Y JYL5019A Manuel utilisateur
JONATHAN Y
JONATHAN Y JYL6007A Manuel utilisateur
Philips
Philips Ledino 31606/11/16 Manuel utilisateur
Salus
Salus UG600 Manuel utilisateur
Safavieh Lighting
Safavieh Lighting CANDRI TBL4427A Manuel utilisateur
Hunter
Hunter Bullet Spotlight Kit Manuel d'instructions
