Velodyne SMS -1 Manuel utilisateur
Digital Drive®
SMS™
-1
Subwoofer
Management
System
USER’S
MANUAL
Featuring Software Version 2.1
Caution!
i
.www.velodyne.com Digital Drive User’s Manual
Attention!
ii
.www.velodyne.com Digital Drive User’s Manual
Vorsicht!
iii
.www.velodyne.com Digital Drive User’s Manual
Attenzione!
iv
.www.velodyne.com Digital Drive User’s Manual
Table of Contents
v
.www.velodyne.com Digital Drive User’s Manual
Congratulations ...................................................................................................1
Before you Begin .................................................................................................1
Package Contents................................................................................................2
Product Features and Controls ..............................................................................2
-SMS-1 ..........................................................................................................2
-Remote Control ..............................................................................................3
-Digital Drive Accessory Kit ...............................................................................5
Installation Overview .............................................................................................5
SMS-1Controls and Ports .................................................................................5
Installation –Quick Start .......................................................................................8
Installation –Step-by-Step......................................................................................9
-SMS-1Cable Connections ................................................................................9
-AWord About SMS-1Outputs..........................................................................9
-AWord About Interconnect Cables .................................................................10
-AWord About Connecting more than one SMS-1..............................................10
SMS-1Setup -OVERVIEW...................................................................................12
-Quick Setup Using Self-EQ ..............................................................................12
-ON-SCREEN Setup ........................................................................................12
Onscreen Programming and Setup –Step by Step..................................................17
Restoring Defaults .............................................................................................34
Runtime Mode ..................................................................................................35
About Room Equalization.....................................................................................38
Careof Your Digital Drive SMS-1..........................................................................38
Troubleshooting and Service ................................................................................38
Appendix A: RS-232 Serial Overview and Commands ..............................................39
Appendix B: Summaryof Special Remote Codes.....................................................41
Congratulations
1
.www.velodyne.com Digital Drive User’s Manual
Congratulations on your purchase of a Velodyne Digital Drive SMS-1Subwoofer Management
System! This system enables you to bring the power of Velodyne’s patent-pending Digital Drive
bass management to any subwoofer. Digital Drive technology, universally acknowledged as the
state-of-the-art in bass reproduction, is the result of years of research and development,
combining advanced Digital Signal Processing (DSP), software, equalizer, and audio filter
technologies. The result is a product that provides levels of bass management for non-DD
subwoofers previously unattainable.
This exceptional product will provide you with years of unparalleled listening pleasure. Enjoy!
Please observe the following instructions to insure safe and proper system operation.
Warning!
To prevent fire or shock hazard, do not expose this equipment to rain or moisture. To avoid
electrical shock, do not open the chassis cover. Please observe all warnings on the equipment
itself. There are no user serviceable parts inside. Please refer all service questions to your
authorized Velodyne dealer.
Prior to installation
Please unpack the system carefully! Remove all staples if used to seal the carton as they can
scratch the chassis. Please save the carton and all packaging materials for future use.
Packing this unit in any other carton may result in damage when shipping. Please take a
moment to recordthe serial number and date/location of purchase in the space provided on
the warranty card for future reference or register on-line at www.velodyne.com.
NOTE: Be sure to check the Velodyne website at www.velodyne.com for updates to the
SMS-1 software and/or this manual.
Caution!
This SMS-1 has electronics built into the cabinet. Do not place the cabinet next to
sources of heat such as furnace registers, radiators, etc. Do not place the unit near
sources of excessive moisture, such as evaporative coolers, humidifiers, etc. The power
cord should be routed in such a way that it will not be walked on, pinched, or
compressed in any way that could result in damaging the insulation or wire.
Before you begin
Package Contents
2
.www.velodyne.com Digital Drive User’s Manual
Your Velodyne Digital Drive SMS-1 consists of the following components:
•Digital Drive SMS-1
•Power Supply with Cord
•Remote control
•Digital Drive Accessory Kit
CAUTION: Many of the accessories are embedded in the included foam endcaps. Please
do not discard.
SMS-1
Prominent features of your new Digital Drive SMS-1include:
•Front panel display indicating volume, preset, and operating modes
(auto-EQ, mute, night mode)
•Control for up to three subwoofers
•Balanced (XLR) input
•Line-level (RCA) inputs and thruputs
•Speaker-level inputs
•Fixed 80Hz high-pass crossover (RCA output)
•Variable volume control
•Detachable 6-foot power supply
•Included rack mount ears
•On-screen controls:
-Auto-EQ
-Graphic or Parametric Equalizer controls for room EQ
-Adjustable (15Hz –199Hz) low-pass crossover (defeatable)
-Multiple staggered low-pass crossovers (6dB/octave, initial to 48dB/octave, ultimate)
-Adjustable (15Hz -35Hz) subsonic filter (defeatable)
-Multiple staggered subsonic filters (12dB/octave, initial to 48dB/octave, ultimate)
-Variable volume control
-Adjustable phase control (0° -180° in 15° increments)
-Selectable polarity (+/-)
-12 Volt trigger (defeatable)
-6presets for customized listening modes and EQ defeat
-Selectable default preset
-Switchable LCD light
-Night Mode maximum volume setting
-Save settings indicator
-Daisy chain feature
Product Features and Controls
3
.www.velodyne.com Digital Drive User’s Manual
Remote Control
The Velodyne Digital Drive infrared remote control allows you to set up, adjust, and reset your
SMS-1when connected to a television or a video monitor. You will also use your remote to
activate preset listening values, set the SMS-1’s volume up or down, mute the SMS-1, or set
anight operational mode.
Take care not to lose or misplace your remote control as adjustments to the SMS-1(with the
exception of volume control) can only be done using the remote.
NOTE: Two 1.5V AA batteries are required and included for operation of the
remote control.
4
.www.velodyne.com Digital Drive User’s Manual
Remote Control Buttons
Abrief description of each button on the remote control follows:
•PWR –Causes the SMS-1to stand by.
•NUMERIC KEYPAD –Used to enter an
unlock code to enter SETUP mode, and for
other functions.
•SET (+/-) –Increases or decreases the Q value
for a parametric EQ, or sets values on the
SYSTEM SETTINGS page.
•LIGHT –Turns the SMS-1’s LCD light on or off.
•NIGHT –Limits the peak output of the SMS-1,
and illuminates the NIGHT indicator on the
LCD screen.
•VOL (+/-) –Raises or lowers the volume of
your SMS-1as indicated on the LCD display.
•MUTE –Mutes and unmutes the SMS-1.
•TEST –Used to toggle between the SYSTEM
SETTINGS screen and the SYSTEM RESPONSE
screen during setup.
•EXIT –Toexit SETUP mode. The unit will ask
if you want to save settings before exiting.
•SELECT -To toggle field values.
•RESET –Used to reset volume to the last saved
setting on the main screen, and to defeat
crossovers on the settings screen.
•MENU –Enters SETUP mode from the
introductoryscreen.
•PRESETS –To access the five presets and one
EQ defeat listening modes. Initially set at the
factory, they are fully user adjustable. The
front panel LCD indicates which preset you
have selected.
Figure 1: Velodyne Digital Drive remote control
Ce manuel convient aux modèles suivants
2
Table des matières
Autres manuels Velodyne Subwoofer
Velodyne
Velodyne SMS-1 - OUTLAW GUIDE Manuel utilisateur
Velodyne
Velodyne MicroVee Manuel utilisateur
Velodyne
Velodyne OPTIMUM-10 - DATASHEET 2 Manuel utilisateur
Velodyne
Velodyne SPL-1000 Ultra Manuel utilisateur
Velodyne
Velodyne CHT-10 Manuel utilisateur
Velodyne
Velodyne Servo F-1000 Manuel utilisateur
Velodyne
Velodyne EQ-Max Series Manuel utilisateur
Velodyne
Velodyne SPL-1200 Ultra Manuel utilisateur
Velodyne
Velodyne SA-7 Manuel utilisateur
Velodyne
Velodyne SC-15 Manuel utilisateur
Velodyne
Velodyne ULD-15 Manuel utilisateur
Velodyne
Velodyne HGS-15 THX ULTRA 2 - REV B Manuel utilisateur
Velodyne
Velodyne EQ-Max8 Manuel utilisateur
Velodyne
Velodyne MiniVee Manuel utilisateur
Velodyne
Velodyne SC-600 IW Manuel utilisateur
Velodyne
Velodyne OPTIMUM-8 - DATASHEET 2 Manuel utilisateur
Velodyne
Velodyne SubContractor SC-10 Manuel utilisateur
Velodyne
Velodyne CHT-8Q - DATASHEET 2 Manuel utilisateur
Velodyne
Velodyne DEQ-10R Manuel utilisateur
Velodyne
Velodyne SPL-800i Manuel utilisateur
