Vello BG-N19-2 Manuel utilisateur

BG-N19-2

BAT TERY GRIP

Designed for the Nikon

D850 DSLR Camera

USER’S MANUAL

Thank you for

choosing Vello.

The Vello BG-N19-2 is compatible with the Nikon D850

DSLR, and it accepts one Nikon EN-EL15a rechargeable

battery in addition to the camera’s internal battery. Eight

AA batteries (alkaline, NiMH, or lithium) can be used

instead for added convenience. And this battery grip is

capable of employing the Nikon BL-5 with EN-EL18b type

batteries. The BG-N19-2 is equipped with an alternate

shutter release, control lock, function, and AF-ON

buttons, as well as a multi selector and main and sub-

command dials, for shooting in a vertical position.

Please read through this entire manual before using the

BG- N19-2 battery grip.

Precautions

The BG-N19-2 should be used only with the

compatible devices specified in this manual.

Use only with batteries and battery holders

recommended in this manual. The BG-N19-2 cannot

be used with other batteries or battery holders.

3. When the BG-N19-2 is not attached to the camera,

cover the power/signal contacts with the contact

cap. This prevents electrical shorts caused by metal

coming into contact with the power/signal contacts.

When the battery holder is removed from the

grip, remove the batteries or place the holder in

a container to prevent electrical shorts caused by

contact with other metal objects.

The memory card access lamp may glow temporarily

when the BG-N19-2 is mounted or removed from

the camera. This is part of the normal operation.

6. If you notice smoke, noise, or an unusual smell from

the battery pack, discontinue use immediately.

Remove the batteries and contact Vello Customer

Service.

The BG-N19-2 does not have a power switch.

Instead, use the camera power switch to turn the

power on or off.

The battery level may not display properly if batteries

are inserted before mounting the grip.

9. Remove batteries from the grip when not in use.

10.

In cold temperatures, batteries can discharge

at a faster rate. Warming up a cold battery can

recover some of its lost charge and help improve

its performance.

11.

Keep this device away from water or extreme

humidity, and store it in a dry and cool place.

12 . Keep out of reach of children.

OVERVIEW INTRODUCTIONASSEMBLYOPER ATION

Overview

1Sub-command Dial *

2Tripod Socket

3Shutter-Release Button *

4Control Lock Switch

To prevent accidental triggering, the

control lock switch locks the shutter-

release button, function button,

AF-ON button, multi selector, and

main and sub-command dials on

the BG-N19-2. Unlock prior to use

by switching to the position. The

control lock is not a power switch.

5Function Button

Can be programmed in the Custom

Settings menu on your camera.

6Contact Cap

7Power/Signal Contacts

8Mounting Screw

9Camera Contact Cover Holder

10 AF-ON Button *

11 Main Command Dial *

12 Multi Selector *

13 Locking Wheel

14 Battery Holder

15 Battery Holder Latch

16 Battery Chamber

17 EN-EL15a Battery Holder

Holder for Nikon EN-EL15a battery.

18 Power Terminals

(EN-EL15a Battery Holder)

19 Push Button

Ejects the battery in the EN-EL15a

Battery Holder.

20 AC Power Supply Socket

Nikon EP-5B Power Supply Connector

port (connector not included).

21 AA Battery Holder

Holds eight AA batteries.

* These controls perform the same

functions as their on-camera equivalents

and are affected by changes to the

Custom Settings menu. See camera

manual for details.

OVERVIEW INTRODUCTIONASSEMBLYOPER ATION

Attaching the Grip

Ensure that the power is

turned off on the camera

and that the Control Lock

on the BG-N19-2 is in the

Lposition before attaching

the grip.

Remove the contact cap

from the BG-N19-2 battery

grip. (When the BG-N19-2

is not attached to the

camera, replace the contact

cap to protect the contacts.)

The contacts for the

BG-N19-2 are on the

bottom of the camera,

where they are protected

by a rubber contact cover.

Remove the contact cover

from the camera before

mounting the grip.

To prevent loss, place the

camera contact cover into

the contact cover holder on

the BG-N19-2.

Connect the BG-N19-2

grip to the camera

while aligning the grip’s

mounting screw with the

camera’s tripod socket.

Rotate the attachment

wheel in the direction

shown by the arrow until

the grip is secure.

OVERVIEW INTRODUCTIONASSEMBLYOPER ATION

Inserting Batteries

Ensure that the power is

turned off on the camera

and the Control Lock on

the BG-N19-2 is in the L

position.

Lift the battery holder

latch so you can rotate it

counterclockwise and pull

the battery holder out of

the grip. The EN-EL15a

battery holder comes pre-

installed.

Nikon EN-EL15a Battery:

Align the indentations

on the battery with the

EN-EL15a holder. Then

press the battery down, and

slide it in the direction of

the arrow until the power

terminals click into place.

AA Batteries: Place eight AA batteries of the

same type in the AA battery holder as shown.

Make sure the batteries are in the correct

orientation.

Make sure the battery holder latch is rotated

counterclockwise, and slide the battery holder all

the way into the grip. Rotate the latch clockwise,

and reposition it so it’s ﬂush with the side of the

grip. Turn on your camera, unlock the BG-N19-2

via its Control Lock switch, and check the battery

level in the control panel or viewﬁnder.

OVERVIEW INTRODUCTIONASSEMBLYOPER ATION

The camera displays the following battery levels.

Nikon EN-EL15a Battery:

LCD/Control

Panel

Viewﬁnder Description

Battery fully

charged.

Battery partially

discharged.

Low battery.

Prepare spare

batteries.

(blinking) (blinking)

Battery

exhausted.

Shutter release is

disabled.

AA Batteries:

LCD/Control

Panel

Viewﬁnder Description

Batteries fully

charged.

Low battery

power. Prepare

spare batteries.

(blinking) (blinking)

Batteries

exhausted.

Shutter release is

disabled.

Battery Info

Table des matières

Autres manuels Vello Accessoires pour appareils photo

Vello

Vello BG-P1 Manuel utilisateur

Vello

Vello FreeWave Fusion Basic Manuel utilisateur

Vello

Vello BG-N7-2 Manuel utilisateur

Vello

Vello Screen Protector Ultra Manuel utilisateur

Vello

Vello BG-N17-2 Manuel utilisateur

Vello

Vello BG-C6 Manuel utilisateur

Vello

Vello BG-S3 Manuel utilisateur

Vello

Vello shutterboss version ii Manuel utilisateur

Vello

Vello shutterboss Manuel utilisateur

Vello

Vello Off-Camera TTL Flash Cord Manuel utilisateur

Vello

Vello BG-N16-2 Manuel utilisateur

Vello

Vello BG-N18 Manuel utilisateur

Vello

Vello BG-N4.2 Manuel utilisateur

Vello

Vello Freewave Manuel utilisateur

Vello

Vello BG-N1 Manuel utilisateur

Vello

Vello FWIRC-N Manuel utilisateur

Vello

Vello Freewave Aviator Manuel utilisateur

Vello

Vello BG-N15-2 Manuel utilisateur

Vello

Vello FWIRC-C FREEWAVE Manuel utilisateur

Vello

Vello BG-S8 Manuel utilisateur

Vello

Vello LAE-MFT-CEFII Manuel utilisateur

Vello

Vello BG-C15 Manuel utilisateur

Vello

Vello BG-C8 Manuel utilisateur

Vello

Vello LAE-SE-NF Manuel utilisateur

Manuels Accessoires pour appareils photo populaires d'autres marques

Viltrox

Viltrox EF-NEX Instructions d'installation

Calumet

Calumet 7100 Series CK7114 Manuel utilisateur

Ropox

Ropox 4Single Series Manuel utilisateur

Cambo

Cambo Wide DS Digital Series Mode d'emploi

Samsung

Samsung SHG-120 Manuel utilisateur

Ryobi

Ryobi BPL-1820 Manuel d'utilisation

Aegis

Aegis ABL-36020P Manuel utilisateur

Pentax

Pentax Data Back Fc Manuel utilisateur

Fantasea

Fantasea EyeGrabber F Series Manuel utilisateur

Honeywell

Honeywell HDZ20HD Manuel utilisateur

EGO

EGO BA1400T Manuel utilisateur

Sima

Sima SRW-62 Manuel utilisateur

Shape

Shape A7SSMKIT Manuel utilisateur

Slide Kamera

Slide Kamera HST-2 Manuel utilisateur

Power works

Power works 2902613 Manuel utilisateur

SES

SES SE-2047-2 Manuel utilisateur

Olympus

Olympus PT-EP05L Manuel utilisateur

Starlite

Starlite OctoDome nxt Manuel utilisateur