Velleman CAMTVI12 Manuel utilisateur

CAMTVI12/CAMTVI12G

HD CCTV BULLET CAMERA - OUTDOOR

HD CCTV BULLETCAMERA - GEBRUIK BUITENSHUIS

CAMÉRA CYLINDRIQUE HD CCTV - EXTÉRIEUR

CÁMARA HD CCTV CILÍNDRICA - EXTERIORES

ZYLINDRISCHE HD CCTV-KAMERA - AUßENBEREICH

KAMERA HD CCTV - ZEWNĘTRZNA - TULEJOWA

CÂMARA HD CCTV - TIPO BALA - EXTERIOR

CAMTVI12

CAMTVI12G

HD-TVI –VARIFOCAL –IR –1080P

USER MANUAL 5

HANDLEIDING 12

MODE D'EMPLOI 19

MANUAL DEL USUARIO 26

BEDIENUNGSANLEITUNG 33

INSTRUKCJA OBSŁUGI 40

MANUAL DO UTILIZADOR 47

CAMTVI12/CAMTVI12G

V. 01 –20/12/2016 2 ©Velleman nv

CAMTVI12/CAMTVI12G

V. 01 –20/12/2016 3 ©Velleman nv

CAMTVI12/CAMTVI12G

V. 01 –20/12/2016 4 ©Velleman nv

CAMTVI12/CAMTVI12G

V. 01 –20/12/2016 5 ©Velleman nv

USER MANUAL

1. Introduction

To all residents of the European Union

Important environmental information about this product

This symbol on the device or the package indicates that disposal of

the device after its lifecycle could harm the environment. Do not

dispose of the unit (or batteries) as unsorted municipal waste; it

should be taken to a specialized company for recycling. This device

should be returned to your distributor or to a local recycling

service. Respect the local environmental rules.

If in doubt, contact your local waste disposal authorities.

Thank you for choosing Velleman! Please read the manual thoroughly before

bringing this device into service. If the device was damaged in transit, do

not install or use it and contact your dealer.

2. Safety Instructions

Keep this device away from children and unauthorized

users.

This appliance is not intended for use by persons (including

children) with reduced physical, sensory or mental

capabilities, or lack of experience and knowledge, unless

they have been given supervision or instruction concerning

use of the appliance by a person responsible for their

safety. Children shall be supervised to ensure that they do

not play with the appliance.

Do not disassemble or open the cover. There are no user-

serviceable parts inside the device. Refer to an authorized

dealer for service and/or spare parts.

Risk of electroshock when opening the cover. Touching

live wires can cause life-threatening electroshocks. Do not

disassemble or open the housing yourself. Have the device

repaired by qualified personnel.

CAMTVI12/CAMTVI12G

V. 01 –20/12/2016 6 ©Velleman nv

3. General Guidelines

Refer to the Velleman® Service and Quality Warranty on the last pages

of this manual.

Keep this device away from dust and extreme temperatures.

Protect this device from shocks and abuse. Avoid brute force

when operating the device.

Familiarise yourself with the functions of the device before actually

using it.

All modifications of the device are forbidden for safety reasons. Damage

caused by user modifications to the device is not covered by the

warranty.

Only use the device for its intended purpose. Using the device in an

unauthorised way will void the warranty.

Damage caused by disregard of certain guidelines in this manual is not

covered by the warranty and the dealer will not accept responsibility for

any ensuing defects or problems.

Due to constant product improvements, the actual product appearance

might differ from the shown images.

Product images are for illustrative purposes only.

Do not use this product to violate privacy laws or perform other illegal

activities.

Do not switch the device on immediately after it has been exposed to

changes in temperature. Protect the device against damage by leaving

it switched off until it has reached room temperature.

Keep this manual for future reference.

4. Features

weatherproof

with B/W night vision (IR LEDs)

1080P video signal

vandal-proof bracket

CAMTVI12/CAMTVI12G

V. 01 –20/12/2016 7 ©Velleman nv

5. Installation

1. Slightly loosen the hex screw on the bracket.

2. Choose your mounting spot. Take the base as a template and drill the

necessary mounting holes. If necessary, drill a hole for routing the

cables. Insert a nylon plug in each hole.

3. Pass the camera cable through the base and fix the bracket using the

included screws. If applicable, pass the cable through the routing hole.

4. Slightly loosen the hex screw, adjust the camera lens and aim it

toward the surveillance area.

5. Tighten the hex screws. Connect and power your camera (see below).

Check the viewing angle on your PC.

CAMTVI12/CAMTVI12G

V. 01 –20/12/2016 8 ©Velleman nv

6. Connection

1. Connect the power terminal of the camera to a 12 VDC regulated

power supply.

2. Connect the video output of the camera to the video input of your DVR

using a 75 Ωcoaxial cable.

Only use a regulated 12 VDC power adapter. Using any

other type will damage this camera.

Protect the connectors against moisture by applying some

insulating tape over the connectors.

7. Focal Length and Focal Adjustment

1. On the DVR live view, click the camera’s channel to display it in full

screen.

2. Open the control panel by clicking the camera icon.

zoom in/out max.

zoom in/out

click to display the image at its

largest/smallest

zoom in/out max.

zoom in/out

click to zoom in/out

focus near/far

click to adjust the focal distance

IR intensity

click and drag the slider from 0 to 5;

the higher the value, the brighter

the image

CAMTVI12/CAMTVI12G

V. 01 –20/12/2016 9 ©Velleman nv

8. Camera Configuration

1. On the DVR live view, right-click in the screen to display the DVR

menu.

2. Select ADVANCED CONFIG > DCCS.

ADVANCED CONFIG

CAMERA

CH1

CH2

CH3

CH4

DETECTION

OSD MENU

SETUP

ALERT

DCCS MENU

SETUP

NETWORK

DISPLAY

RECORD

F.W.

DCCS

DEVICE

AVT SERIES

NOTIFY

CONNECTION

EXIT

3. In DCCS SETUP, click the value to change from 1 to 100.

DCCS SETUP

IR1 BRIGHTNESS USER

100

4. Select ADVANCED CONFIG > DCCS > OSD MENU. Select the

camera’s channel and click SETUP to enter the camera’s menu.

ADVANCED CONFIG

CAMERA

CH1

CH2

CH3

CH4

DETECTION

OSD MENU

SETUP

ALERT

DCCS MENU

SETUP

NETWORK

DISPLAY

RECORD

F.W.

1015

DCCS

DEVICE

AVTXXX

NOTIFY

CONNECTION

EXIT

CAMTVI12/CAMTVI12G

V. 01 –20/12/2016 10 ©Velleman nv

5. Use the keys in the bottom right corner and modify the camera

configuration as desired.

This camera will only work with TVI-compatible DVRs

(Velleman DVRxTx series). Velleman nv does not

guarantee this camera will work with other types of DVRs

and can therefore not be held responsible in this event.

9. Menu

Refer to the illustration on page 2 of this manual.

10. Cleaning and Maintenance

The camera does not need any particular maintenance. However, it is

advisable to clean it occasionally to keep it looking like new.

11. Technical Specifications

IP rating

IP66

pick-up element

1/2.7" CMOS image sensor

number of pixels

1930 (H) x 1088 (V)

resolution

1080P

digital signal processor

Techpoint chip

min. illumination

0.1 lux / F1.6 - F2.8

IR LEDs

4x high-power LEDs

IR-cut filter

yes

max. IR projection distance

50 m

S/N ratio

> 48 dB (AGC off)

lens

f2.8 ~ 8 m / F1.4 ~ F2.8

lens angle

horizontal

57°-104°

vertical

32°-56°

diagonal

65°-126°

BLC

yes

WDR

AGC

yes

white balance

automatic / user / push / 8000K / 6000K /

4200K / 3200K

video output

BNC connection - TVI signal

audio

Ce manuel convient aux modèles suivants

Table des matières

Langues :

Autres manuels Velleman Caméra de sécurité

Velleman

Velleman CAMTVI7N2 Manuel utilisateur

Velleman

Velleman CAMCOLD5 Manuel utilisateur

Velleman

Velleman CAMIP2 Manuel utilisateur

Velleman

Velleman CAMD13 Manuel utilisateur

Velleman

Velleman CAMIP10 Manuel utilisateur

Velleman

Velleman CAMZWIRP Manuel utilisateur

Velleman

Velleman CAMCOLBUL7 Manuel utilisateur

Velleman

Velleman CAMCOLBUL31 Manuel utilisateur

Velleman

Velleman ECAMIP501 Manuel utilisateur

Velleman

Velleman CAMCOLD25 Manuel utilisateur

Velleman

Velleman CAMCOLD20 Manuel utilisateur

Velleman

Velleman CAMCOLD2 Manuel utilisateur

Velleman

Velleman CAMIP12 Manuel utilisateur

Velleman

Velleman CAMIP6 Manuel utilisateur

Velleman

Velleman CAMCOLBUL2 Manuel utilisateur

Velleman

Velleman CAMCOLD8N Manuel utilisateur

Velleman

Velleman CAMTVI2 Manuel utilisateur

Velleman

Velleman CAMTVI1 Manuel utilisateur

Velleman

Velleman CAMCOLH3 Manuel utilisateur

Velleman

Velleman CAMCOLD15 Manuel utilisateur

Velleman

Velleman DWH-A059I Manuel de service

Velleman

Velleman CAMCOLD16H Manuel utilisateur

Velleman

Velleman CAMCOLBUL19 Manuel utilisateur

Velleman

Velleman CAMTVI15 Manuel utilisateur

Manuels Caméra de sécurité populaires d'autres marques

Okina USA

Okina USA SIR36-870VF650LP Manuel utilisateur

Divio

Divio NDR155PA Manuel utilisateur

Canon

Canon VB-C500D Manuel utilisateur

Easy Access

Easy Access EasyGuard Manuel utilisateur

Vivotek

Vivotek FD9389-EHV-v2 Manuel utilisateur

TUYA

TUYA COSMO W2 Manuel utilisateur

Eusso

Eusso UNC7500-IR Guide de configuration

urmet domus

urmet domus 1096/204 Manuel utilisateur

VC VC20 series Manuel utilisateur

Axis

Axis Q1614 Manuel utilisateur

ieGeek

ieGeek DD201 Manuel utilisateur

VADDIO

VADDIO ClearVIEW HD-USB PTZ 999-6990-000 Manuel utilisateur

Vicon

Vicon V662-D-1 Mode d'emploi

Grundig

Grundig GCH-K0274P Manuel utilisateur

Lorex

Lorex VANTAGE LBC7032 Manuel utilisateur

4xem

4xem WPT Manuel utilisateur

Samsung

Samsung SCV-3082 Manuel utilisateur

Vitek

Vitek VTC-C544 Manuel utilisateur