Vax Performance 12 Instructions d'installation

vax.co.uk

Performance 12

Let’s get started

C86-PB-(Be, Pe, Te)

Let’s talk safety

This vacuum cleaner is intended for

household use only and NOT for

commercial or industrial use.

• Only use the vacuum cleaner indoors

on dry surfaces and keep the area

you’re cleaning well lit.

• Keep ngers, hair and loose

clothing away from moving parts

and openings whilst using the

vacuum cleaner.

• This vacuum cleaner can be used

by children aged from 8 years and

above and persons with reduced

physical, sensory or mental

capabilities or lack of experience and

knowledge if they have been given

supervision or instruction concerning

use of the vacuum cleaner in a safe

way and understand the hazards

involved. Children shall not play with

the vacuum cleaner. Cleaning and

user maintenance shall not be made

by children without supervision.

• Only Vax recommended tools and

accessories should be used with this

vacuum cleaner.

Please keep instructions

for further use.

Basic safety precautions

8Don’t use the vacuum cleaner if

it has been dropped, damaged

or left outdoors.

8Don’t run over the power cord or

use vacuum cleaner if the power

cord or plug is damaged. Please

contact our Customer Care Line on:

0844 4128 455 (Mon-Fri 8.30am to

6.30pm Sat 9.00am to 5.00pm).

8Don’t handle the plug or use the

vacuum cleaner with wet hands.

8Don’t pull or carry the vacuum

cleaner by the power cord.

Don’t use the power cord as

a handle, pull the power cord

around corners, sharp edges or

close a door over the power cord.

Don’t unplug vacuum cleaner by

pulling on the power cord.

8Don’t vacuum up any ammable

or combustible materials (lighter

uid, petrol, kerosene etc.) or use

the vacuum cleaner in an area with

explosive vapours or liquid.

Don’ts

3Turn o all controls on the vacuum

cleaner before disconnecting or

connecting the power cord.

3Always make sure the lters are in

place before use.

3Always switch o the vacuum

cleaner before disconnecting

or connecting the hose

and accessories.

3Keep all openings clear and free

from debris as this may aect the

airow/suction.

3Always replace the fuse in the

plug with a British 5amp fuse.

Always protect the power cable from

heated surfaces and open ames.

3Take extra care when positioning

and using the vacuum cleaner

on the stairs.

3Use only CE approved 5amp

extension cords, non-approved

extension cords may overheat.

Care should be taken to arrange

the extension cord as it can be

a trip hazard.

3Store the vacuum cleaner in a cool,

dry area. If lters have been cleaned

as per user guide instructions

ensure they are thoroughly dry

before storing away.

Do’s

8Don’t vacuum up hot coals, cigarette

butts, matches or smoking hot

burning items or use in an area

where there may be harmful uids

(chlorine, bleach, and ammonia

drain cleaner).

8Don’t attempt to remove blockages

with sharp objects as this may cause

damage to the vacuum cleaner.

8Don’t vacuum up hard or sharp

objects such as glass, nails, screws

or coins etc.

8Don’t use the vacuum cleaner with

incorrect voltage as this may result

in damage or injury to the user.

The correct voltage is listed on the

ratings label.

Don’ts

Thank you for buying this Performance 12.

Taking care of your carpets

The Performance 12 is designed to make vacuuming carpets regularly, as eective and ecient

as possible and this user guide will help you get the most out of your machine.

Maintaining your carpets will ensure they keep their appearance for longer and smell fresh and

clean. You’ve chosen carpets for your home for a reason and Vax will help you take good care

of them.

Taking care of your Performance 12

Also inside this guide are instructions on maintaining your new machine, so that it’s always ready

when you are to tackle your carpets.

Taking care of you

We’re here if you need us. Instead of taking me back

to the shop, simply visit:

vax.co.uk/support or call:

(UK) 0844 412 8455 (ROI) 1-800 928 308

Monday-Friday 8.30am to 6.30pm, Saturday 9.00am to 5.00pm

Calls are charged at the UK local rate. Please make a note of the serial number and model number

of the product before calling.

Alternatively, you can write to us at:

Vax Ltd., Kingswood Road, Hampton Lovett, Droitwich, Worcestershire, WR9 0QH, UK

Let us know what you think @VaxUK

Contents

Let’s talk safety

Getting to know your machine

Getting started

Using your machine

Taking care of your machine

Let’s talk technical

What to do if it goes wrong

Getting in touch

Accessories

Notes

Initial Setup for normal operation

1. Use the base accessories.

a. Shortest hose

b. Extension tube set to shortest practicable length.

2. Clean lters installed.

3. Dust receptacle empty.

4. All Bleeds must be closed.

5. Variable Power set to Maximum.

6. Floor heads/tools set to Carpet Mode for carpet cleaning.

7. Mechanical Agitation turned ON for carpet cleaning.

8. Floor heads/tools set to Hard Floor Mode for hard oor cleaning.

9. Mechanical Agitation turned OFF for hard oor cleaning.

Performance 12

Hose and handle

Stretch

hose

Telescopic extension tube

Combination oor head

3-in-1 tool

Included with

your machine*

Performance 12 Pet

TurboTool

Up top tool

* Some parts may vary according to model.

Please check inside of box for more details.

Pre-motor lter

Performance 12

Total Home

Tool connector

Flexi

crevice tool

Post-motor lter

Getting started

On/o button

Floor head parking slot

Cord rewind button

Dirt container

release button

Carry handle

Dirt container

Separator and shroud

Post-motor

lter (hidden)

Hose entry point

Pre-motor

lter (hidden)

Getting to know your machine

Technical Specication

Subject to technical change without notice.

Turbo Tool (Type 6)

1-1-134419-00

Tool Connector (Type 1)

1-1-133838-00

Combination Floor Tool (Type 6)

1-1-134330-00

3-in-1 tool (Type 9)

1-1-134551-00

Filter (Type 108) – Post Filter

1-1-134392-00

Filter (Type 116) – Pre Filter

1-1-134532-00

Accessories & Consumables

*To purchase consumables and accessories, please visit vax.co.uk

Name Performance 12

Voltage 220-240~50Hz

Wattage 800watts

Cord Length 5.5/6m

Weight 5kg

Getting started

Assembling your vacuum cleaner

Press both buttons at end

of hose and insert into

hose entry point.

Press button on telescopic

extension tube and adjust

to required length.

Insert the other end of the

telescopic tube into the

oor head.

Before you begin cleaning

IMPORTANT: The vacuum cleaner is equipped with a thermal cut-out. If for any reason the vacuum cleaner does

overheat, the thermostat will automatically turn the vacuum cleaner o. If this happens, switch the vacuum cleaner

o and unplug. Remove and empty the dirt container also check the vacuum cleaner for blockages. Allow the vacuum

cleaner to cool for approximately 1 hour (if you have cleaned the lters please wait 24 hours for the lters to fully dry

before putting back into the machine).

Clean the pre-motor every time the dirt container is emptied and replace the lters every 12 months.

If the vacuum cleaner is blocked, switch o and unplug before removing the blockage.

PLEASE READ ‘LET’S TALK SAFETY’ AT THE BEGINNING BEFORE USE

WARNING

Always switch o the vacuum cleaner

before connecting or disconnecting the

hose/attachments, or removing and

emptying the dirt container.

Insert hose grip into

telescopic extension tube.

Using your machine

TIP

Using your machine

Brushes on the oor head

should be visible when using

on hard oors.

Unwind the power cord.

Do not pull further than the

yellow marker.

Plug into mains and push

the on/o button to turn

the machine on.

For use on carpets, click

rocker switch forward. For

use on hard oors click rocker

switch back.

Slide vent cover on hose grip open

to reduce suction if required.

Raise brushes for carpets. Lower brushes for hard

oors.

IMPORTANT: The base of the vacuum cleaner should always be positioned at on the oor when starting and in use.

The dirt container should be locked into place before lifting the vacuum cleaner by the carry handle.

WARNING: When unwinding the power cord do not pull further than the yellow marker.

Using your machine

Choose an accessory.

Using accessories

Press dirt container

release button and lift

to remove.

Emptying and cleaning the dirt container

Cleaning the shroud

Hold dirt container over a bin and

pull the dirt release clip on the

bottom of the dirt container,

allowing dirt/debris to fall out.

IMPORTANT: Unplug and switch o vacuum cleaner before performing maintenance or troubleshooting checks.

Taking care of your machine

Don’t over ll the dirt container to

avoid blocking the air ow through

the vacuum cleaner.

TIP

Twist the shroud and pull

to remove.

Tap the shroud over a bin to

remove any dirt/debris.

MAX

40˚C

MAX

40˚C

Rinse the shroud under water

(Max 40°C) Leave to dry for 24

hours or until fully dry before

placing back in the machine.

Using your machine

Attach accessory to hose end. If required use tool connector.

Taking care of your machine

Let’s talk technical

Cleaning the post-motor lter

Press dirt container release

button and lift to remove.

Push tab and pull to remove

the post-motor lter.

Tap the post-motor lter over a bin

to release dirt/debris. Always replace

before using your vacuum.

WARNING Do not wash the post-motor lter.

Cleaning the pre-motor lter

Press dirt container release

button and lift to remove.

Remove the pre-motor

lter. Separate the lter

frame and foam.

Tap the lter frame and foam over

a bin to remove any dirt/debris.

Rinse both the lter frame

and foam under water

(Max 40°C).

Leave to dry for 24 hours

or until fully dry before placing

back in the machine.

24hr

TIP

Clean the pre-motor every time

the dirt container is emptied

and replace the lters every

12 months.

Filters available at

www.vax.co.uk

Table des matières

Autres manuels Vax Aspirateur

Vax

Vax V-100T Manuel utilisateur

Vax

Vax Impact 502 Instructions d'installation

Vax

Vax V-002 mojo II Manuel utilisateur

Vax

Vax Essentials VEC-104 Manuel utilisateur

Vax

Vax VGHV18 Manuel utilisateur

Vax

Vax Dust & Vac Cordless HF86-DV-B Manuel utilisateur

Vax

Vax C91-MZ SERIES Manuel utilisateur

Vax

Vax Workman VCC-07 Manuel utilisateur

Vax

Vax Steam Fresh Combi Classic S86-SF-CC Instructions d'installation

Vax

Vax HF86-FM-T Manuel utilisateur

Vax

Vax VRS14W Manuel utilisateur

Vax

Vax Libretto Fiche d'information produit

Vax

Vax Air Max Pet Instructions d'installation

Vax

Vax Swift V-075 Manuel utilisateur

Vax

Vax VCC-08 Manuel utilisateur

Vax

Vax V-2300U Manuel utilisateur

Vax

Vax U90-CX-P-A Manuel utilisateur

Vax

Vax FORCE3 VZL-118 Series Manuel utilisateur

Vax

Vax H85-AC21-B Manuel utilisateur

Vax

Vax C90-EB-B-C Manuel utilisateur

Vax

Vax U90-P2 Series Manuel utilisateur

Vax

Vax C91-MX SERIES Manuel utilisateur

Vax

Vax C90-EL SERIES Manuel utilisateur

Vax

Vax H85-D-B14 Instructions d'installation

Manuels Aspirateur populaires d'autres marques

Bissell

Bissell LittleGreen Proheat 1425 Series Manuel utilisateur

Panasonic

Panasonic MC-YL637S147-AE Manuel utilisateur

NEFF

NEFF N17XH10 0 Series Manuel utilisateur

LG A9 Series Manuel utilisateur

Oreck

Oreck Cordless Captura BK51700 Series Manuel utilisateur

Kogan

Kogan KAVACROBVWA Manuel utilisateur

Kränzle

Kränzle VENTOS 50 ID Guide de l'utilisateur

EVVO

EVVO Ai35 Manuel utilisateur

DeWalt

DeWalt DWH200D Manuel utilisateur

Pontec

Pontec Pondomatic Vacuum Cleaner Manuel utilisateur

Cleanmaxx

Cleanmaxx PC-P007E Manuel utilisateur

Exido

Exido 240-114 Manuel utilisateur

RIDGID

RIDGID WD1685AU0 Manuel utilisateur

Ezviz

Ezviz RE4P Manuel utilisateur

STG global

STG global TANVAC HDV3000 Manuel utilisateur

Shark

Shark ROTATOR PRO COMPLETE NV550 Series Manuel utilisateur

Factory

Factory M3340 Manuel utilisateur

Shop-Vac

Shop-Vac VN92 SERIES Manuel utilisateur