Varytec Hell Ball I Manuel utilisateur
User’s manual
Hell Ball I
2 / 8
Table of content
1. Safety instructions........................................................................................................................... 3
2. Brief Description.............................................................................................................................. 4
3. Installation....................................................................................................................................... 4
4. Maintenance ................................................................................................................................... 6
4.1. Warning.................................................................................................................................. 6
3 / 8
1. Safety instructions
FOR SAFE AND EFFICIENT OPERATION
Be careful with heat and extreme temperatureAvoid exposing it
to direct rays of the sun or near a heating appliance.
Not put it in a temperature bellow 41°F /5°C, or exceeding 95°F /35°C.
Keep away from humidity, water and dust
Do not place the set in a location with high humidity or lots of dust.
Containers with water should not be placed on the set.
Keep away from sources of hum and noise
Such as transformer motor, tuner, TV set and amplifier.
To avoid placing on un-stable location
Select a level and stable location to avoid vibration.
Do not use chemicals or volatile liquids for cleaning
Use a clean dry cloth to wipe off the dust, or a wet soft cloth for stubborn dirt.
If out of work, contact sales agency immediately
Any troubles arose, remove the power plug soon, and contact with an engineer for repairing,
do not open the cabinet by yourself, it might result a
danger of electric shock.
Take care with the power cable
Never pull the power cable to remove the plug from the receptacle, be sure
to hold the plug. When not using the player for an extended period of time
be sure to disconnect the plug from the receptacle.
4 / 8
2. Brief Description
LED Light Source: 1PCS 10W RGB LED.
Auto Mode
Sound Mode
Master Slave Mode
Standard DMX512 control signal,6 DMX channels.
Voltage: AC220V 60Hz
Power Consumption 25W
Work Environment:Indoor 200C-400C
Net weight:3KG Gross weight:3.7KG
Dimension: 250L×250W×245H mm
Package : L 310×W 310×H295mm
Application:Main apply in entertainment places,such as dance hall,night club,stage,stadium,bar and
KTV.
Character:This product use super brightness LED as light source,colourful,shakeproof,long working
life.(100,000 hours),low heating,less power consumption,high security,can working 24 hours without
stop.
3. Installation
1、The light can be fixed in any place,but the light must keep a distance between person or objects at
1m minimum. And please make sure the light is fixed well, the light should be earthed.
2Please make sure the rated voltage and frequency should suit to your local voltage.
3You can turn on the light after connected.
4Connection of the DMX512
The DMX512 signal of the controller is serial connected through the Input and Output 3pins XLR
socket of the light.(1 Earth2 Negative3 PositiveNote:Please exchange to solder the pin2 and
pin3 if it’s uncontrolled, it’s unnecessary to change normally. The length of the signal cable should
keep within 100 meters in order to avoid the interference.The light will work according to the IP Code
which you selected when you are using the DMX512 controller control HellballRGB LED Light.Setting
5 / 8
of IP Code,first light show IP is A001,the second light is 1+6=7IP Code is A007the third light is
1+6+6=13,IP Code is A013,(analogy accordingly,the setting method should according to the
controller
DMXChannels DMX Value Function
0--7 Stop
8--123 Rotate Slow---Fast
124--131 Stop
132--247 Antirotate Fast--Slow
Motor control
248--255 Stop
0--35 Dimmer
36--70 Glitter
71--105 shadow
106--140 Color-over
141--175 Color-over + Glitter
176--210 Glide
LED All function
211--255 Glide + Glitter
Timing 0--255 Slow-Fast( Glitter Color-over Glide )
Dimmer 0--255 R Dark---Light
Glitter 0--255 R Light---Dark
Dimmer 0--255 G Dark---Light
Glitter 0--255 G Light---Dark
Dimmer 0--255 B Dark---Light
Glitter 0--255 B Light---Dark
6 / 8
Manual Switcher Control List
BitNo 12345678910
Controller Mode ○○○○○○○○○×
Slave Mode ××××××××√√
Auto Mode ○○○○○○○√×√
Sound Mode ○○○○○○√××√
Led Speed 1 ○○√√○○○○×√
Led Speed 2 ○○×√○○○○×√
Led Speed 3 ○○√×○○○○×√
Led Speed 4 ○○××○○○○×√
Motor speed 1 √√○○○○○○×√
Motor speed 2 ×√○○○○○○×√
Motor speed 3 √×○○○○○○×√
Mast
Mode
Motor speed 4 ××○○○○○○×√
Remark: ①“√”means turn on,“×” means turn off, “○”means turn on or off.
②With DMX mode,the IP code be setted by manual switcher.IP
code range is 1 to 511.
4. Maintenance
Please make sure it’s power off before you open or maintain the light,it’s very important to keep
clearcleaning the light usually will not only keep it with maximum brightness output,but also prolong
its work life. The professional glass detergent for cleaning is suggested,alcohol and any chemical
detergent is not allowed. The internal of the light must be cleaned by the vacuum cleaner
once each year.
4.1. Warning
Please don’t dismantle or remodel the light.
Please keep the light away from water or any of the liquid and metals.
Please don’t install the light in high temperature environment.
Please don’t irradiate on the flammable objects, it must keep a distance at 5m minimum between light
and flammable objects.the light must keep a distance with the near objects at 1m minimum.
Please don’t look at the light directly, or it will hurt your eyes.
Please make sure it’s power off before open or repair the light.
7 / 8
Note:To prevent or reduce the risk of electrical shock or fire,do not expose this unit to rain or
moisture.This may hurt your eyes and avoid looking directly into the light source!
Please recycle the shipping carton when ever possible.
8 / 8
Importeur:
B & K Braun GmbH
Industriestraße 1
D-76307 Karlsbad
www.bkbraun.com
Table des matières
Autres manuels Varytec Équipement d'éclairage
Varytec
Varytec Theaterspot Pro 300 fresnel Manuel utilisateur
Varytec
Varytec TouchWash Manuel utilisateur
Varytec
Varytec LED ROAD PAR 14 x 3W RGB 3in1 Manuel utilisateur
Varytec
Varytec LED Derby ST Manuel utilisateur
Varytec
Varytec Hero Wash 300 TW Manuel utilisateur
Varytec
Varytec Theaterspot Pro 650 Manuel utilisateur
Varytec
Varytec Easymove XL 60 Spot Manuel utilisateur
Varytec
Varytec Laser Moonstar MK II Manuel utilisateur
Varytec
Varytec Strobe Xenon 3000DMX Manuel utilisateur
Varytec
Varytec Hero Wash 340FX RGBW Zoom Manuel utilisateur
Varytec
Varytec Sparkle 3 Manuel utilisateur
Varytec
Varytec Studio Par II CDM 150 Manuel utilisateur
Varytec
Varytec VR-260 Manuel utilisateur
Varytec
Varytec BAT.PAR 8 RGBW Manuel utilisateur
Varytec
Varytec LED Spot 3 Manuel utilisateur
Varytec
Varytec VP-m5 Manuel utilisateur
Varytec
Varytec Derby Manuel utilisateur
Varytec
Varytec GLC-1 Manuel utilisateur
Varytec
Varytec PAR 56 short Manuel utilisateur
Varytec
Varytec FLATBEAM DUO 48x8W RGBW Manuel utilisateur
Manuels Équipement d'éclairage populaires d'autres marques
Qazqa
Qazqa Suplux SL 3 Black 103062 Manuel utilisateur
Commercial Electric
Commercial Electric 54568141 Manuel utilisateur
CREE LIGHTING
CREE LIGHTING 304 Series Manuel utilisateur
Goobay
Goobay 49867 Manuel utilisateur
ECOMAN ITALIA
ECOMAN ITALIA LED T8 Manuel utilisateur
Alkalite
Alkalite Krypton KT-81 Manuel utilisateur
