Varme FH-01 Manuel utilisateur
1
Operating Instructions
Model: FH-01
230V A/C
16Amp
Digital Thermostat Programmer
For Electric Underfloor Heating
Version 2
April. 2010
2
Contents
Installation 3
LCD Display & Controls 4-5
Temperature Display 6
Setting the Clock 6
Setting the Comfort Levels 7
Keypad Lock Facility 8
Temperature Hold 9
Setting the Temperature 9
Holiday Feature 10
Frost Protection & Power On/Off 11
Factory Reset 11
Operating Mode 12
Wiring 18
Optional Thermostat Settings 13-17
Error Codes & Notes 19
3
Installation Procedure
Do’s
1. Mount the thermostat at eye level
2. Read the instructions fully to get the best from our product.
Don’ts
1. Do not install near a direct heat source as this will affect
the workings of the thermostat
2. Do not push hard on the LCD
Installation
The thermostat should be mounted in a 35mm (min) deep back
box.
Step 1 - Carefully separate the front half of the thermostat
from the back plate by placing a small flat head terminal driver
into the slots on the bottom face of the thermostat.
Step 2 - Place the thermostat front somewhere safe. Terminate
the thermostat as shown in the diagram at the back of this
booklet.
Step 3 - Clip the front of the thermostat to the back plate,
taking care not to bend or damage the connection pins
4
LCD Display & Controls
01
02
03
04
05
06
07
08
09
10
11
12
13
14
15
16
17
18
5
1. Day Indicator
2. Power Delivery Indicator - Displayed when power is being delivered
to the floor
3. Frost Protection - Displayed when the heating system is off and the
system is protecting against frost only
4. Room/Floor Temp - Indicates the current sensor mode
5. Current Temp - Indicates the current sensor temperature
6. Set - Indicates when changes are being made to programs or
temperature set points
7. Program Cycle Indicator - Displayed during programming, only, to
show which period is being altered
8. Holiday Indicator - Displayed when the programmer is in holiday
mode
9. Clock Button
10. Power Button
11. H Button
12. Floor Temp Achieved Indicator - Displayed when the floor set point
temperature is reached
13. Temperature Hold - Displayed when manually overriding the
program, “HOLD FOR” and the time period are displayed.
14. Units of Temperature - Degrees Celsius or Fahrenheit
15. Keypad Lock Indicator - Displayed when the keypad is locked
16. Infrared Receiver (for optional infrared controller)
17. A Button
18. Up/Down Arrows
6
Temperature Display
This thermostat can be setup to use an air sensor, floor sensor
or both. On the display it will clearly show which sensor is
being displayed by showing either “Room Temp” or “Floor
Temp” before the temperature.
Note: Air Sensor only MUST NOT be used to control
underfloor heating. Floor Sensor or Both should be used.
When the thermostat is set to use both sensors, the room
temperature will normally be shown. To view the floor
temperature, press and hold the A key until the Floor
Temperature is shown.
Setting The Clock
To set the clock, follow the steps below.
• With the thermostat turned on, press the Clock button twice
• You are now able to set the minutes using the Up/Down keys
• Press H to accept
• You are now able to set the hours using the Up/Down keys
• Press H to accept
• You are now able to set the day of the week using the Up/Down keys
• Press A to store and exit
7
Comfort Levels Explained
The thermostat provides Weekday/Weekend or 7 Day
Programming. You should consult the “Configuration Menu”
section to select the required mode.
The thermostat is supplied with comfort levels already
programmed, but these can be changed easily. The default
times are;
08.00 - 21°C (Wake)
09.30 - 16°C (Leave)
16.30 - 22°C (Return)
23.00 - 17°C (Sleep)
If you only want to use 2 levels, you should program the
unused levels to --.--
• To begin programming the comfort levels, press Clock Once
• If your thermostat is setup for Weekday/Weekend
Programming, you will see Mon-Fri shown. For 7 day
programming you will see Monday
• Using the Up/Down arrow keys, enter the required Wake time
8
• Press H
• Using the Up/Down arrow keys, enter the required Wake
Temperature
• Press H
• You will now see “Leave”
• You should repeat the programming for each period, entering
--.—for unused periods.
Note: For weekday/weekend Programming, the 4 comfort
levels are the same for all weekdays. For 7 day programming,
each day can have 4 different comfort levels.
Locking The Thermostat
The thermostat has a key-lock facility. To enable follow these
Steps
• Press and hold the A and Down Key for 10 seconds
• You will see the lock symbol appear
• To unlock, repeat the steps above
9
Temperature Hold
The temperature hold function allows you to manually override
the programme and set a temperature for a desired period.
• Press H
• Using the Up/Down arrow keys enter the required hold time
• Press H
• Using the Up/Down arrow keys enter the required hold
temperature
• Press A to accept
You will see the Hold indication is displayed which will
countdown the hold duration.
To cancel, reduce the Hold time to 00 hours
Temperature Set
Using the Up or Down arrow keys allows you to adjust the set
temperature. When you press either of these keys, you will see
the word SET and the desired temperature.
Press A to accept.
10
Holiday
The thermostat has a holiday function. This allows you
to enter a holiday setting. During a holiday, the thermostat will
maintain the frost set temperature. At the end of your holiday,
the thermostat will revert back to the programmed setting
ensuring that your home is warm on your arrival.
• Press H three times (Until you see the suitcase)
• Using the Up/Down arrow keys enter the number of days
holiday
• Press A to accept
The thermostat display will show a suitcase indicating the
thermostat is in holiday mode. To cancel, reduce the Holiday
duration to 00 days.
Table des matières
Manuels Thermostat populaires d'autres marques
EWELLY
EWELLY EW-181 Manuel utilisateur
Prolon
Prolon T1100 Instructions d'installation
Computherm
Computherm Q20 Manuel utilisateur
Heatmiser
Heatmiser neoStat Manuel utilisateur
Aube Technologies
Aube Technologies TH111GFCI-NP 240 VCA Manuel utilisateur
Mars
Mars HEAT CONTROLLER IR Wireless Thermostat Manuel utilisateur
