VARIZOOM MEDIA RIG Manuel utilisateur

VZ-DVMediaRig

Professional Camera Support

Kit includes: (1) Adjustable Shoulder

Arch (2) Handle Section (3) Belt (4)

Spring Pod (5) Quick-release Plate (6)

Tilt Lever (7) Accessory Mount (8)

Swiveling counterweight (may differ from

picture)

WARNING: NEVER POINT THE TIP OF THE SPRING POD AT YOUR FACE. ONLY LOOSEN

THE CLAMPS WHEN THE SPRING POD IS ATTACHED TO THE LOADED DV MEDIA RIG. THE

SPRING POD CAN POP OUT QUICKLY AND CAUSE INJURY IF THESE RULES ARE NOT

FOLLOWED.

1) Connect the handles to the shoulder arch by

sliding the smaller end of the handle

assembly through the stainless steel cylinder.

Secure the two sections together by inserting

the tilt lever (6) through the stainless steel

cylinder and threading it into the handle

section. The tilt lever adjusts the tension on

the tilt action of the handles. The position of

the lever can be adjusted without loosening –

simply grab the lever and press on the red

button, then adjust the angle of the lever.

2) The swiveling counterweight can be adjusted to the left or right to

compensate for balance issues created by the camera and other

mounted accessories. For now, tighten the pivot knob thoroughly

so it doesn’t move while you are mounting the camera and

accessories and making adjustments to the Rig.

3) Attach the quick-release plate to your camera using the appropriate screw. Remove the

unused screw and store in a secure location. Once the quick-release plate is firmly attached to

your camera, set it aside.

4) Attach the belt to your waist with the holster facing front. Take the spring pod and insert the

flat end into the holster, making sure to run the pod through the D-ring at the top of the holster.

Do not loosen the spring pod clamps yet.

5) Make sure the tilt lever on the DV Media Rig is tightened so the

handles don’t rotate easily and the unit can stand securely. Take

the camera with quick-release plate attached and secure it to the

base plate on the DV Media Rig. Pick up the Rig and place it over

your shoulder. The front of the Rig must be attached to the spring

pod. Insert the brass tip of the spring pod into the coiled spring on

the underside of the handle assembly. Once the spring pod is

secured, loosen the spring pod clamps.

6) If you plan to attach any accessories such as a light, mic, XLR mic adapter, etc., go ahead and

attach them to the accessory mount and fix it to the Rig.

7) With the Rig fully mounted and loaded, you’ll know if any position and balancing adjustments

need to be made. You can adjust the side-to-side balance of the camera by loosening the

single-wing knob above the spring pod attachment point and sliding the camera platform. You

can also adjust the side-to-side balance by pivoting the counterweight at the rear.

8) The primary positional adjustment is at the shoulder pivot. This

will allow you to change the angle and height of the shoulder arch

for maximum comfort.

The tilt lever allows you to change the amount of tension in the

tilting mechanism or soft-lock the tilt position. Never operate the

Rig with the tilt lever excessively loose.

Depending on the weight of your camera, you may want to lock one of the sections of the

spring pod to minimize the spring action. You can also extend and lock both sections for

elevated shots.

The DV Media Rig is covered by a 2-year parts & labor warranty against defects.

If you have any questions, give us a call or shoot us an email –www.varizoom.com

Ce manuel convient aux modèles suivants

Table des matières

Autres manuels VARIZOOM Accessoires pour appareils photo

VARIZOOM

VARIZOOM CrossFire FP Manuel utilisateur

VARIZOOM

VARIZOOM VZ-FC350K Manuel utilisateur

VARIZOOM

VARIZOOM VZ-MC100 Manuel utilisateur

VARIZOOM

VARIZOOM VZ-MC50 Manuel utilisateur

VARIZOOM

VARIZOOM VZ-MC50 Manuel utilisateur

VARIZOOM

VARIZOOM VZ-MC50 Dual Manuel utilisateur

VARIZOOM

VARIZOOM VZ-LSP Manuel utilisateur

VARIZOOM

VARIZOOM FLOWCAM GT Manuel utilisateur

VARIZOOM

VARIZOOM VZ-MC100 Manuel d'installation

VARIZOOM

VARIZOOM Cinema Pro JR-K5 Manuel utilisateur

VARIZOOM

VARIZOOM S1080BS Manuel utilisateur

VARIZOOM

VARIZOOM SoloJib Manuel utilisateur

VARIZOOM

VARIZOOM VZ-FH100 Manuel utilisateur

VARIZOOM

VARIZOOM StealthyPro Manuel utilisateur

VARIZOOM

VARIZOOM VZ-QuickJib Manuel utilisateur

VARIZOOM

VARIZOOM CP JR Manuel utilisateur

VARIZOOM

VARIZOOM VZ-FlowPod Mini Manuel utilisateur

VARIZOOM

VARIZOOM CP Micro Manuel utilisateur

VARIZOOM

VARIZOOM Solo Slider Dolly Manuel utilisateur

VARIZOOM

VARIZOOM AutoRig Manuel utilisateur

VARIZOOM

VARIZOOM FlowPod Manuel utilisateur

VARIZOOM

VARIZOOM Cinema Pro JR Manuel utilisateur

VARIZOOM

VARIZOOM VZ-EFC2 Manuel utilisateur

VARIZOOM

VARIZOOM VZ-EFC-U Manuel utilisateur

Manuels Accessoires pour appareils photo populaires d'autres marques

Viltrox

Viltrox EF-NEX Instructions d'installation

Calumet

Calumet 7100 Series CK7114 Manuel utilisateur

Ropox

Ropox 4Single Series Manuel utilisateur

Cambo

Cambo Wide DS Digital Series Mode d'emploi

Samsung

Samsung SHG-120 Manuel utilisateur

Ryobi

Ryobi BPL-1820 Manuel d'utilisation

Aegis

Aegis ABL-36020P Manuel utilisateur

Pentax

Pentax Data Back Fc Manuel utilisateur

Fantasea

Fantasea EyeGrabber F Series Manuel utilisateur

Honeywell

Honeywell HDZ20HD Manuel utilisateur

EGO

EGO BA1400T Manuel utilisateur

Sima

Sima SRW-62 Manuel utilisateur

Shape

Shape A7SSMKIT Manuel utilisateur

Slide Kamera

Slide Kamera HST-2 Manuel utilisateur

Power works

Power works 2902613 Manuel utilisateur

SES

SES SE-2047-2 Manuel utilisateur

Olympus

Olympus PT-EP05L Manuel utilisateur

Starlite

Starlite OctoDome nxt Manuel utilisateur