Valor Inspire L Instructions d'utilisation

08/54177/0 ISSUE: 0

Please keep me in a safe place for future use.

Inspire Gas Stove

Model’s; and M

Fitted with 401FS or 401RC UMINAIRE

Inset live fuel effect gas fire with LED fuel bed.

We trust that this guide gives sufficient details to enable this appliance to be installed,

operated and maintained satisfactorily. However, if further information is required, our

Valor Technical Helpline will be pleased to help.

Telephone 0844 879 35 88 (National call rates apply in the United Kingdom).

In the Republic of Ireland Telephone 01 842 8222.

INSTALLER ANDOWNER GUIDE

(including photocopying), stored in any medium by electronic means (including in any

retrieval system or database) or transmitted, in any form or by any means, whether

electronic, mechanical, recording or otherwise, without the prior written permission of

the copyright owner.

Applications for the copyright owner's permission to reproduce any part of this

publication should be made, giving details of the proposed use, to the following

address: The Marketing Communications Manager, DC roup Ltd, Millbrook House,

range Dive, Hedge End, Southampton, SO30 2DF.

Warning: Any person who does any unauthorised act in relation to a copyright work

may be liable to criminal prosecution and civil claims for damages.

Because our policy is one of constant development and improvement, details may vary

slightly from those given in this publication

THIS APP IANCE IS FOR USE WITH NATURA GAS (G20).

THIS APP IANCE IS SUITAB E ON Y FOR INSTA ATION IN THE UNITED

KINGDOM (GB) AND THE REPUB IC OF IRE AND (IE).

Page 3

Safety First.

Valor fires are CE Approved and designed to meet the appropriate British Standards

and Safety Marks.

Quality and Excellence.

All Valor fires are manufactured to the highest standards of quality and excellence

and are manufactured under a BS EN ISO 9001 quality system accepted by the

British Standards Institute.

The Highest Standards

Valor is a member of the Benchark scheme and HHIC (Heating and Hot water

Industry Council) that work to ensure high standards of safety, quality and

performance.

Careful Installation

This gas fire must be installed by a competent AS SAFE RE ISTER operative in

accordance with this installer guide.

INSTALLER UIDE

FOR OWNER UIDE SEE PA ES 39 TO 59

INSTALLER GUIDE

CONTENTS

Section Page

INSTA ER GUIDE 4 - 38

OWNER GUIDE 39 - 59

1. APP IANCE & C EARANCE DIMENSIONS 8

2. SAFETY (GAS & E ECTRICA ) 9 - 10

3. THE BENCHMARKING SCHEME 11

4. APP IANCE DATA, EFFICIENCY AND NOx 12

4.1 eneral information. 13

4.2 Efficiency. 13

4.3 NOx 13

5. GENERA INSTA ATION REQUIREMENTS 14

5.1 Regulations, Standards and Law. 14

5.2 The Hearth 14

5.3 Clearances 14

5.4 Flue / Chimney 15

5.5 Ventilation requirements. 15

5.6 Location 15

5.7 The Atmosphere sensing device (ASD). 15

5.8 Fireguard requirements. 16

5.9 Use of extraction fan. 16

5.10 Clearance to flammable materials 16

5.11 Leveling the stove 16

5.12 Securing the stove 16

6. PACK CONTENTS 17 - 18

7. GAS SUPP Y CONNECTION 19

8. PREPARING APP IANCE FOR INSTA ATION 19

9. IGNITION CHECK 20

9.1 Fitting slider handle to control cam (FS) 20

9.2 Fitting the battery into spark ignition generator (FS) 21

9.3 Checking the ignition operation 21

9.4 Fitting batteries into remote control handset (RC) 22

9.5 Fitting batteries into the valve (RC) 22

9.6 Setting the handset and reciever relationship (RC) 22 - 23

9.7 Factory reset of remote handset (RC) 23

9.8 Checking the ignition operation (RC) 23

9.9 Error codes (RC) 23

Continued on next page

Page 5

INSTALLER GUIDE

10. ED CHECK 24

10.1 Fitting the transformers male DC jack connector into convection box 24

10.2 Connecting the male and female DC jack into the LED circuit 24

10.3 Checking the LED operation 24

11. FITTING THE WA INERS 25

11.1 Fitting the rear wall liner 25

11.2 Fitting the lass liners spacer support. 25

11.3 Fitting the side wall liners. 25

12. BURNER AND SUPP Y PIPE INSTA ATION 26

12.1 Burner installation. 26

12.2 Supply pipe installation. 26

12.3 Burner checks - FS model 26

- 12.3.1 Lighting the fire 27

- 12.3.2 Adjusting flame height 27

- 12.3.3 Turning off 27

12.4 LED fuel effect checks. 27

- 12.4.1 Lighting the LED fuel effect 27

- 12.4.3 Turning off 27

12.5 Burner checks - RC model 28

- 12.5.1 Lighting the fire 28

- 12.5.2 Adjusting flame height 28

- 12.5.3 Turning off 28

12.6 Check inlet pressure. 29

13. REASSEMB E OF FIRE & OG SET AYOUT 29- 31

13.1 Fitting the burner unit into convector box 29

13.2 Fitting the top tray onto the burner unit 29

13.3 Install the log set 29

- 13.3.1 Placement of the 4 small logs 29

- 13.3.2 Placement of Clear lass Pebbles 30

- 13.3.3 Placement of rey Chips and Natural vermiculite flakes 30

- 13.3.4 Placement of the 3 large logs 31

13.4 Fitting the top tray onto the burner unit 31

13.5 Install the log set 31

14. FU OPERATING CHECKS 32

14.1 Check the burner operation. 32

14.2 Check for spillage. 32

14.3 Flame supervision and spillage monitoring system. 32 - 33

Continued on next page

CONTENTS (Continued)

Section Page

INSTALLER GUIDE

15. FINA REVIEW 33 - 34

16. SERVICING & PARTS REP ACEMENT 34

16.1 To remove the visual baffle. 34

16.2 To remove the window door panel. 34

16.3 To remove the fuel effect 34

16.4 To remove the top tray. 34

16.5 To remove the burner assembly 34

16.6 To access and remove the Inspection panel 35

16.7 To remove the wall liners 35

16.8 To remove the burner tubes (a) or pilot unit (b). 36 - 37

16.9 To remove the as valve LED On/Off switch or Ignition unit 37

16.10 To remove the TESC gas valve, LED On/Off switch or Manifold 37 - 38

16.11 To replace the burner injectors (s). 38

16.12 To remove the LED strip or LED controller PCB. 38

CONTENTS (Continued)

Section Page

Page 7

INSTALLER GUIDE

1.APPLIANCEDIMENSIONS

INSTALLER GUIDE

X X1

X1X

Product Dimension L M

X 1035 mm 863 mm

Y 525 mm 525 mm

Z 397 mm 397 mm

X1 988 mm 816 mm

Z1 127 mm 127 mm

FIG 2

FIG 1

Clearance Dimensions

L & M L & M

A (Sides) B (Shelf)

Minimum to Combustible Material 100 mm -

Minimum to Combustible S elf - 300 mm

Minimum to Non-Combustible Material 50 mm -

Minimum to Non-Combustible S elf - 100 mm

2.SAFETY

Installer

Before continuing any further with the installation of this appliance please read the following

guide to manual handling.

-The lifting weight of this appliance (kg) is approx as below:

Model Weight

Inspire Stove Model L inc 401 engine* 40 Kg

Inspire Stove Model M inc 401 engine* 51 Kg

*excludes liner set & packaging.

These appliances are heavy. We therefore recommend that two person’s should be sufficient to

lift the fire. If fitting or moving the fire alone we recommend the use of suitable lifting apparatus.

-When lifting always keep your back straight. Bend your legs and not your back.

-Avoid twisting at the waist. It is better to reposition your feet.

-Avoid upper body/top heavy bending. Do not lean forward or sideways whilst

handling the fire.

-Always grip with the palm of the hand. Do not use the tips of fingers for support.

-Always keep the stove as close to the body as possible. This will minimise the

cantilever action.

-Use gloves to provide additional grip.

-Always use assistance if required.

-This product uses log fuel effect pieces, burner compartment walls and ceramic pebbles

containing Refractory Ceramic Fibres (RCF), which are man-made vitreous silicate fibres.

Excessive exposure to these materials may cause irritation to eyes, skin and respiratory

tract. Consequently, it is important to take care when handling these articles to ensure that

the release of dust is kept to a minimum. To ensure that the release of fibres from these

RCF articles is kept to a minimum, during installation and servicing we recommend that

you use a HEPA filtered vacuum to remove any dust and soot accumulated in and around

the fire before and after working on the fire. When replacing these articles we recommend

that the replaced items are not broken up, but are sealed within a heavy duty polythene

bag, clearly labelled as RCF waste. RCF waste is classed as a stable, non-reactive

hazardous waste and may be disposed at a landfill licensed to accept such waste.

Protective clothing is not required when handling these articles, but we recommend you

follow the normal hygiene rules of not smoking, eating or drinking in the work area and

always wash your hands before eating or drinking.

-This appliance does not contain any component manufactured from asbestos or

asbestos related products.

Page 9

INSTALLER GUIDE

E ECTRICA SAFETY

Before switching on, please read the operating instructions fully.

- This appliance is not intended for use by persons (including children) with reduced physical,

sensory or mental capabilities, or lack of experience and knowledge, unless they have been given

supervision or instruction concerning use of the appliance by a person responsible for their safety.

- Children should be supervised to ensure that they do not play with the appliance.

- NOTE: This appliance is ON Y to be used with the power supply unit provided. Only plug this

appliance into a supply that corresponds to that displayed on the power supply unit. The appliance

must only be supplied at extra low voltage corresponding to the markings on the appliance.

- Plug positioning, the appliance MUST be positioned so that the plug/transformer is accessible. It

is necessary to be able to disconnect the appliance from the mains electrical supply after

installation. This could be achieved by a incorporating a switch into the mains supply wiring in

accordance with the rules in force. Do not use an extension lead.

- Unplugging, in the event of a fault unplug the device. It is also recommended to unplug the

device when not required for long periods.

- Damage, if the transformer or it lead is damaged it must be replaced by the manufacturer or

service agent or a similarly qualified person in order to avoid a hazard. Never attempt to cut the

transformer lead so as to extent it.

- Where the transformer lead may have to pass through a fireplace, stone surround etc ensure

suitable rubber bushes are fitted at possible wear points. Keep the transformer lead away from the

front of the appliance and any hot areas inside the convector box and outside.

INSTALLER GUIDE

Ce manuel convient aux modèles suivants

Table des matières

Autres manuels Valor Poêle

Valor

Valor 550 Manuel utilisateur

Valor

Valor Portrait President FS Stove 531CSB Manuel utilisateur

Valor

Valor Madrona MF28ILN Mode d'emploi

Valor

Valor Hamlet Manuel

Valor

Valor Madrona MF28EN Manuel

Valor

Valor Firefox 5 910 Manuel utilisateur

Valor

Valor MADRONA MFCS01 Manuel utilisateur

Valor

Valor Vega 200 Gas Instructions d'utilisation

Valor

Valor The Arden Manuel

Valor

Valor Portrait Series Manuel utilisateur

Valor

Valor ardeche 8121 Guide d'installation

Valor

Valor The Arden Manuel

Valor

Valor 550 Manuel utilisateur

Valor

Valor 910 Brunswick Instructions d'utilisation

Valor

Valor MADRONA MF28JN Guide de planification

Valor

Valor Willow Manuel

Valor

Valor ovation 810 Guide d'installation

Valor

Valor Ridlington 944 Instructions d'utilisation

Manuels Poêle populaires d'autres marques

Arada

Arada Cassette Stove Manuel utilisateur

Parmco

Parmco FS 600 Manuel utilisateur

MCZ

MCZ SUITE AIR 10 M2 Manuel utilisateur

HearthStone

HearthStone Stowe DV 8321 Guide de dépannage

Cattara

Cattara FAMILY Manuel utilisateur

Stanley

Stanley Argon F500 OVAL Manuel utilisateur

Avalon

Avalon B-VENT Manuel utilisateur

Nordpeis

Nordpeis Vega Manuel utilisateur

Exquisit

Exquisit EKC601-5 Manuel d'utilisation

Stanley

Stanley Oisin Oil MK II Manuel du propriétaire

Thermocet

Thermocet Brookfield S/CC Manuel utilisateur

HASE

HASE delhi Manuel utilisateur

Vermont Castings

Vermont Castings Intrepid 2 Manuel utilisateur

Italiana Camini

Italiana Camini CLASSICA Guide de démarrage rapide

Avalon

Avalon Vashon Avanti DVS FS Manuel utilisateur

Spartherm

Spartherm ambiente a1 Manuel utilisateur

Dimplex

Dimplex MCFSTV12AU Manuel utilisateur

Warmlite

Warmlite WL46040 Manuel utilisateur