Vaisala SPH10 Mode d’emploi

Installation and Maintenance

SPH10 Static Pressure Head

– Eliminates effectively wind

disturbances from pressure

measurements

– Adaptable to many barometers,

directly to Vaisala PTB210

– Durable and easy to clean

INTRODUCTION

Vaisala model SPH10 Pressure Head provides an effective

elimination of pressure variations in the barometer due to the

wind. The SPH10 is easy to clean and maintain. It can be

integrated directly with the Vaisala PTB210 barometer. To other

barometers the SPH10 can be connected with pressure tubing.

ASSEMBLING

1. Screw the lower bar to the threaded sleeve of the lower

plates (with 6 holes)

2. Screw the upper bar (with mounting plate) to the threaded

sleeve of the upper plates

MOUNTING

Select an open location, prefereably a place higher than the

surroundings, with no buildings or trees nearby. Attach the

SPH10 to a horizontal pole using a mounting plate. A suitable

pole is Vaisala sensor mast, type DKP12. However, any other

horizontal pole with two screws (M6) in a distance of 41 mm can

be used.

NOTE! The recommended distance of the SPH10 from the

vertical pole should be at least 1.5 m.

1. Loosen the two fixing screws of the pole and fix the SPH10

into the pole as indicated in Figure 1.

2. Attach the SPH10 by tightening the screws. (The pressure

Head is removed by loosening the two screws).

CONNECTION TO THE VAISALA PTB210

(see figure 2)

1. Detach the threaded nipple and the gasket (see figure 1).

2. Place the O-ring into the barometer groove.

3. Attach the PTB210 to the SPH10 with two fixing screws.

CONNECTION TO THE OTHER BAROMETERS

Connect the barometer to the threaded nipple (figure 1) by using

a plastic tube with an inner diameter of 4 mm.

Figure 1. SPH10 Static Pressure Head.

Figure 2. PTB210 barometer connection.

Pole

Upper bar

Fixing screws

Upper plate

Lower plate

Threaded sleeve

Lower bar

Upper bar

Threaded nipple and the gasket (R1/4

parallel thread)

PTB210

Barometer

Fixing screw with a

washer (included in

the PTB210)

O-ring (included in

the PTB210)

Mounting plate

U440en-1.1

www.vaisala.com Ref. U440en-1.1

TECHNICAL DATA

Property Description / value

Materials

Plates Polycarbonate

Bars Offshore Aluminium

Mounting with 2 bolts

(M6 x minimum 20 mm)

Weight 800 g

Hose connection barbed fitting for 4 mm I.D. hose

or Rp1/4 thread (parallel)

Operating conditions -60°C...+ 80°C

MAINTENANCE

Figure 3. Detaching the lower plate for cleaning.

Cleaning the SPH10 is done by detaching the lower bar and the

lower plate. The barometer can be in place while cleaning the

plates. Please, follow the instructions below:

1. Unscrew the lower bar and detach it.

2. Open the self-locking nut with a 13 mm spanner.

3. Remove the threaded sleeve and take out the lower plate

and the protective wire net.

4. Clean the plates.

5. Replace the lower plate, the protective wire net and the

threaded sleeve, screw back the nut and the lower bar.

Keep the holes of the lower plate open to allow the water run

out.

DIMENSIONS (in mm)

200

6.5

Protective wire net

Lower plate

Threaded sleeve

Lower bar

151 60 144

ø22

371

GUARANTEE

Vaisala issues a guarantee for the material and

workmanship of this product under normal operating

conditions for one (1) year from the date of delivery.

Exceptional operating conditions, damage due to careless

handling and misapplication will void the guarantee.

Vaisala SSD Service Centres

Vaisala SSD Service, Vanha Nurmijärventie 21, FIN-01670

Vantaa, FINLAND, Phone: +358 9 8949 2658, Fax +358 9 8949

2295

Vaisala KK, 42 Kagurazaka 6-Chome, Shinjuku-Ku, Tokyo 162-

0825, JAPAN, Phone: +81 3 3266 9611, Fax +81 3 3266 9610

Vaisala Inc., 100 Commerce Way, Woburn, MA 01801-1068, USA

Phone: +1 781 933 4500, Fax +1 781 933 8029

Internet: http://www.vaisala.com

Technical support: ssdservice@vaisala.com

Autres manuels Vaisala Instrument de mesure

Vaisala

Vaisala FC-11 Manuel utilisateur

Vaisala

Vaisala WAA151 Manuel utilisateur

Vaisala

Vaisala HUMICAP HM70 Manuel utilisateur

Vaisala

Vaisala K-PATENTS PR-23 Series Manuel utilisateur

Vaisala

Vaisala HUMICAP HMP155 Manuel utilisateur

Vaisala

Vaisala Optimus OPT100 Manuel utilisateur

Vaisala

Vaisala CARBOCAP GMP343 Manuel utilisateur

Vaisala

Vaisala DMP80 Series Manuel utilisateur

Vaisala

Vaisala Indigo80 Manuel utilisateur

Vaisala

Vaisala CARBOCAP GM70 Manuel utilisateur

Vaisala

Vaisala DMP5 Manuel utilisateur

Vaisala

Vaisala HUMICAP HM75 Manuel utilisateur

Vaisala

Vaisala HUMICAP HM70 Manuel utilisateur

Vaisala

Vaisala MGP261 Manuel d'installation et d'exploitation

Vaisala

Vaisala CARBOCAP GMP231 Manuel utilisateur

Vaisala

Vaisala M212551EN-B Manuel utilisateur

Vaisala

Vaisala HMT330WPA Manuel utilisateur

Vaisala

Vaisala HUMICAP HM70 Manuel utilisateur

Vaisala

Vaisala HPP272 Manuel utilisateur

Vaisala

Vaisala WAA251 Manuel utilisateur

Vaisala

Vaisala WAV151 Manuel utilisateur

Vaisala

Vaisala HUMICAP HMI41 Manuel utilisateur

Vaisala

Vaisala MGP260 Series Manuel utilisateur

Vaisala

Vaisala CT25K Manuel utilisateur

Manuels Instrument de mesure populaires d'autres marques

Suaoki

Suaoki D40 Manuel utilisateur

Elster

Elster BK-G1.6 Manuel utilisateur

Endress+Hauser

Endress+Hauser Deltabar FMD71 Manuel

Duratool

Duratool D03128 Manuel utilisateur

Vega

Vega VEGAPULS 65 Manuel utilisateur

Tonghui

Tonghui TH2618B Manuel utilisateur

Tenmars

Tenmars TM-801 Manuel utilisateur

MSR

MSR 145 Manuel utilisateur

TPS

TPS WP-82 Manuel utilisateur

ELMETRON

ELMETRON CP-511 Manuel utilisateur

PCB Piezotronics

PCB Piezotronics 003C30 Manuel utilisateur

Tenma

Tenma 72-10465 Manuel utilisateur

Endress+Hauser

Endress+Hauser Proline Promag 50 Caractéristiques techniques

Siemens

Siemens SITRANS F Coriolis FCT030 Manuel de la liste des pièces

KLINGER

KLINGER CMF V Series Manuel utilisateur

EXFO

EXFO FTB-2 Manuel d'exploitation et d'entretien

Keysight

Keysight M8290A Manuel utilisateur

ADTEK

ADTEK MW-5 Manuel utilisateur