V-TAC 11077 Manuel utilisateur
INSTRUCTION MANUAL
Product name: Indoor Display Screen
SKU : 11077
WEEE Number: 80133970
INTRODUCTION
Thank you for selecng and buying V-TAC product. V-TAC will serve you the best. Please read these instrucons
carefully before starng the installing and keep this manual handy for future reference. If you have any another
query, please contact our dealer or local vendor from whom you have purchased the product. They are trained, and
always ready to serve you.
SPECIFICATIONS :
! WARNING
• Take care not to pull the wiring during unpacking, please check whether screen/parts/wiring
have been damaged during transport and do not operate/install any product which appears
damaged in any way. In such a case, return the complete product to the place of purchase
for inspecon, repair or replacement.
• Although easy to fit, this screen requires wiring to the main and for safety, should only be
installed by a qualified electrician.
• Always turn off the power before installation. inspection, maintenance, or removal.
• The product should be installed in a dry area.
• DO NOT EXCEED THE MAXIMUM WATTAGE RATING.
PRODUCT OVERVIEW :
This is an Indoor LED FInished Cabinet. The product is fied with LED, which is an innovave and progressive technology. LED
products are 100% efficient, and brighter than any other products.
This product can be used in staons, ports, airports, shopping malls, hotels, meeng rooms, stage, etc.
Pixel pitch
LED Specificaon
LED Configuraon
Module Size
Module Resoluon
Drive Method
Drive IC
Power Consumpon
Cabinet Size(L*H*D)
Cabinet Resoluon
Module quanty each cabinet
Power Consumpon
Cabinet Material
Cabinet Weight
Screen Area
Screen Resoluon
Cabinet Quanty
Pixel Density
Brightness
Opmum View Distance
Gray Scale
Display Color
Operaon Power
Power Consumpon
Control Mode
Refresh Frequency
Surport Signal Input
Control Distance
Life Span(50% brightness)
IP(Front)
Control System
LED Module
Parameter
LED Cabinet
Parameter
Screen
Parameter
5mm
SMD3528
SMD 3 in 1
320*160mm
64*32=2048dot
1/16 scan constant current
SM16106
25-30W
640*640*95mm
128*128
2*4=8
300w/cabinet
Iron
8kg/cabinet
98.304sqm
98.304*40000=3932160
240pcs
40000dots/sqm
1800nits
more than 5m
16bits
281 trillions(synchronized)
220V-240V/ 50/60HZ
300W/cabinet
Synchronized
more than 700HZ
S-Video,RGBHV,YUV etc.
UTP140M,SINGLE MODE FIBER 15KM
100000hrs
IP20
"PCTV nonlinearity card，DVI display card
Linsn control system"
INSTALLATION :
SAFETY INSTRUCTION :
1. To fix the screen, first make a stable steel structure (The backside of cabinets need to have protecon).
2. Connect the cabinet to each other,one by one.
5. Connect the main power cable from the power box to the screen.
6. Connect the main signal cable from the computer to the screen.
7. Ensure that all the connecons have been made properly. Then, turn on the power.
8. Insert the sending card in the CPU. Now install the soware, and start the setup for the control system.
3. To fix the cabinet with the steel stucture, use the U-shaped steel connector. The connector can be used to join the cabinets
with the help of screws.
4. Now connect the signal & power cable (in & out) from cabinet to cabinet.
Please ensure that you read all the safety instrucons before installing this product.
This product is intended for professional use only.
Fire, electric shock or dropping the product may lead to severe injuries, or even death.
Warning : The cabinets are heavy. Be careful in order to avoid injuries.
Warning : Beaware of shock!
Switch off the power before cabling or wiring, or before connecng or disconnecng any part of the product.
The mains switch should be located nearby the product, and in an obvious & easy-to-reach place, so that power
can be disconnected as soon as possible, in case a failure arises.
Install the product only in an even and stable area.
Aer succesfully assembling the display, check to ensure that the power wiring is in a good condion.
Warning : Beaware!
The installaon locaon of the displays needs good venlaon . Do not hang anything on the display.
Warning! Wear a crash helmet, so as to avoid any injuries.
Please pay aenon to the Visual Distance, and avoid watching the screen closely, for a prolonged period, so as to
avoid any damage to the vision.
ADDITIONAL INFORMATION :
SYSTEM CONFIGURATION :
IN CASE OF ANY QUERY/ISSUE WITH THE PRODUCT, PLEASE REACH OUT TO US AT: SUPPORT@V-TAC.EU
FOR MORE PRODUCTS RANGE, INQUIRY PLEASE CONTACT OUR DISTRIBUTOR OR NEAREST
DEALERS. V-TAC EUROPE LTD. BULGARIA, PLOVDIV 4000, BUL.L.KARAVELOW 9B
1. Each cabinet is equipped with a synchronous card.
2. The maximum number of cabinets that can be connected vercally is 12.
3. Signals can travel between cabinets using up & down or le & right connecon. The default cascading is up & down
connecon.
4. Connect the AC power cable between cabinets using the up & down cascading connecon.
5. Each AC power cable lead from the distribuon cabinet can cascade 12 unit cabinets at the most.
6. The power consumpon per square meter is 1000W.
7. This product is for indoor use only.
8. One sending card can support 1024(W)*768(H) dots screen area.
The whole system is made of the following parts :
1. Series cabinet
2. Distribuon cabinet
3. Controlling computer
Ce manuel convient aux modèles suivants
1
Autres manuels V-TAC Écran de projection
