UVISION UVISION X1 Manuel utilisateur

Copyright ○
C2021 UVision Innovation Co., Ltd. All rights reserved. 2
Contents
Safety Instructions .................................................................................................................................. 3
Trademarks ............................................................................................................................................. 4
Regulatory Notices.................................................................................................................................. 4
Introduction............................................................................................................................................. 5
Package Contents................................................................................................................................ 5
Product Overview ............................................................................................................................... 6
Using the UVISION X1.......................................................................................................................... 9
Turning On / Off the Projector............................................................................................................ 9
Adjusting the Projection Image......................................................................................................... 10
Adjusting Projection Image Focus.................................................................................................... 11
Adjusting Projection Image Size....................................................................................................... 11
Adjusting Projection Image Keystone .............................................................................................. 12
Signal Source choosing..................................................................................................................... 13
Connection to HDMI Playback Devices........................................................................................... 13
Connection to a USB Drive .............................................................................................................. 14
Connection to a AV Device.............................................................................................................. 14
Connection to External Audio Devices............................................................................................. 15
Use Screen Mirroring........................................................................................................................ 15
Menu Controls ...................................................................................................................................... 16
Appendices............................................................................................................................................ 19
Troubleshooting................................................................................................................................ 19
Product Specification........................................................................................................................ 20

Copyright ○
C2021 UVision Innovation Co., Ltd. All rights reserved. 3
Safety Instructions
1. Read all warnings and follow all instructions.
2. Do not block any ventilation openings. To ensure reliable operation of the projector and to
protect from over heating, it is recommended to install the projector in a location that
does not block ventilation. As an example, do not place the projector on a crowded coffee
table, sofa, bed, etc. Do not put the projector in an enclosure such as a book case or a
cabinet that restricts air flow.
3. Avoid exposing the projector to direct sunlight or other sources of sustained heat. Do not
install near any heat sources such as radiators, heat registers, stoves, or other devices.
4. Do not use the projector near water or moisture. To reduce the risk of fire and/or electric
shock, do not expose the projector to rain or moisture.
5. Do not place the projector on an uneven or unstable surface. The projector may fall over,
causing personal injury or projector malfunction.
6. Do not look straight at the projector lens during operation. The intense light beam may
damage your eyes.
7. Please remove the lens cap when the projector is operating. Do not block the projection
lens with any objects as this could cause objects to become heated and deformed or even
cause a fire.
8. Do not let objects or liquids enter the projector. They may touch dangerous voltage points
and short out parts that could result in fire or electric shock.
9. When moving the projector, be careful not to drop or bump the projector on anything.
10. Do not place any heavy objects on the projector or connection cables.
11. Do not stand the projector on end vertically. Doing so may cause the projector to fall over,
causing personal injury or projector malfunction.
12. Only use attachments/accessories specified by the manufacturer.
13. Do not place liquids near or on the projector. Liquids spilled into the projector may cause
it to fail. If the projector does become wet, disconnect it from the power supply and
contact UVISION to have projector serviced.
14. When the projector is under operation, you may sense some heated air and odor from its
ventilation grill. It is a normal operation and not a defect.
15. If smoke, an abnormal noise, or a strange odor is present, immediately switch the
projector off and contact UVISION. It is dangerous to continue using the projector.
16. Disconnect the power cord from the AC outlet if the projector is not being used for a long
period of time.
17. Do not attempt to service the unit yourself. Opening or removing covers may expose you
to dangerous voltages or other hazards. Please contact UVISION before you send the unit
for repair.

Copyright ○
C2021 UVision Innovation Co., Ltd. All rights reserved. 4
Trademarks
UVISION and the UVISION logo are trademarks of UVision Innovation Co., Ltd , registered
in the United States and other countries.
Regulatory Notices
FCC Compliance Statement
This device complies with part 15 of the FCC rules.
Operation is subject to the following two conditions
(1) This device may not cause harmful interference, and
(2) This device must accept any interference received including interference that may cause
undesired operation.

Copyright ○
C2021 UVision Innovation Co., Ltd. All rights reserved. 5
Introduction
Package Contents
Your projector comes with all the items shown below. Ensure that you have all the items, and
contact UVISION if anything is missing.
UVISION X1 Projector
Remote Control
Power Cord
HDMI Cable
User Manual
Note: The Remote Control not includes battery.

Copyright ○
C2021 UVision Innovation Co., Ltd. All rights reserved. 6
Product Overview
UVISION X1 Projector –Controls and Functions
Item
Description
1
IR Receiver for Remote Control
2
Front tilt adjustment stand
3
Focus adjust
Item
Description
4
Dual Channel Stereo Out
5
Heat dissipation air inlet

Copyright ○
C2021 UVision Innovation Co., Ltd. All rights reserved. 7
Item
Description
14
Power Button
Connection Ports
Item
Description
6
Dual Channel Stereo Out
7
IR Receiver for Remote Control
8
USB Port
9
AV Port
10
AC Power Cord inlet
11
HDMI Port
12
USB Port
13
AUX Port

Copyright ○
C2021 UVision Innovation Co., Ltd. All rights reserved. 8
Remote Control
Key
Description
1
Power
2
Mute
3
Prev
4
Play / Pause
5
Next
6
Up / Down / Left / Right
7
Enter
8
Back
9
Menu
10
Signal Source
11
Volume Down / Volume Up

Copyright ○
C2021 UVision Innovation Co., Ltd. All rights reserved. 9
Using the UVISION X1
Turning On / Off the Projector
Turning Your Projector On
1. Connect the power cord and appropriate signal cables to the projector.
2. Remove the lens cap.
3. Press the Power button or the Power key by remote control.
4. Turn on your source (computer, DVD player, etc).
5. Connect your source to the projector using the appropriate cable.
6. The input source is determined by the last connected input source. (By default, the input
source of the projector is set to Multimedia). Change the input source of the projector if
necessary.
Note: Turn on the projector before you turn on the source (computer, DVD player, etc.). The
Power button light red until pressed. After turn on the projector, button light blue.
Turning Your Projector Off
1. Press the Power button or the Power key by remote control. Follow the instruction
displayed on screen to properly turn off the projector.
2. Press the Power button or the Power key again.
3. Disconnect the power cord from the electrical outlet and the projector.
Note: The “Power key to standby any key to cancel” message will appear on the screen. The
message disappears after you can press the any key to clear it.

Copyright ○
C2021 UVision Innovation Co., Ltd. All rights reserved. 10
Adjusting the Projection Image
Raising the Projector Height
Raise the projector to the desired display angle, and use the front tilt adjustment wheel to
fine-tune the display angle.
Lowering the Projector Height
Lower the projector, and use the front tilt adjustment wheel to fine-tune the display angle
Table des matières
Manuels Projecteur populaires d'autres marques

Panasonic
Panasonic PTL735NTU - LCD PROJECTOR-NETWORK IB Manuel utilisateur

NEC
NEC NP600S EDU Manuel utilisateur

BenQ
BenQ SH753P Manuel utilisateur

Eiki
Eiki EK-623U series Manuel utilisateur

Epson
Epson PowerLite Pro Cinema 6020UB Manuel utilisateur

Epson
Epson PowerLite Home Cinema 705HD Manuel utilisateur












