UTICOR MI-24 Manuel utilisateur
Manual
Monitor MI-24
Page 2
Contents:
Page
1 General 4
2 Technical data 5
3 Power Supply 6
3.1 Monitor with 12 DC power supply
3.2 Monitor with 24 DC power supply
3.3 Monitor with 230 AC power supply
4 Backside Monitor 7
5 OSD Menu 7
5.1 Picture 8
Adjust of the backlight
Adjust the brightness
Contrast setting
Adjust the Sharpness
5.2 Display 9
Optimal picture adjustment
H. position
. position
Pixel clock
Phase
5.3 Color 10
Gamma value
Color Temp
Color Effect
Color Demo
Color Format
Hue
Saturation
5.4 Advance 11
Aspect Ratio
Overscan
DDCCI
Ultra ivid
5.5 Input 12
GA / D I / DP
5.6 Other 13
Reset
Menu Time
OSD H Position
OSD Position
Language
Transparency
Rotate
5.7 Information 14
Contents:
Page
6 Touch Screen 15
7 Monitor care 16
8
8 Screensaver 16
9 security 16
10 Mechanical dimensions 17
10.1 Monitor with Standard or Stainless Steel Front Plate 17
11 Front panel cutout monitor with 18
Standard or stainless steel front plate
Notes 19
Page 3
1 - General
The monitor has a 24"TFT display with
a resolution of 1920 x 1080 pixels.
The connection to the PC takes place
via a GA interface with 15-pin GA
plug or via a D I interface with D I-I
Dual Link plug (24 + 1 pin) or the dis-
play port for the transmission of digital
image signals.
Optionally, the monitor can be equipped
with a resistive touch screen. The touch
has a USB interface.
Monitor with stainless steel front plate
If the monitor is equipped without a touch, the display is protected against contact and contact
with moisture and aggressive substances through a glass. There is a standard protective glass
and a visually anti-glare protective glass available.
The monitor is available with a standard or stainless steel front plate and mounting bolts on the
back. These two versions are intended for installation in a control cabinet or control panel. The
front panel has a gasket. The degree of protection is IP 65.
Page 4
Monitor Back with standard front plate
and mounting olts
The monitors have a standard 12 DC
power supply and are supplied with an
external 230 AC / 12 DC power
supply. All monitors are optional with a
supply voltage of 24 DC or with an in-
ternal power supply of 230 AC
available.
2 - Technical specifications
Page 5
Reserve technical changes.
Technical specifications
LCD - Type 24“ TFT
resolution (Pixel) 1920 x 1080
act. screen area(mm) 476,64 x 268,11
pixel density (mm) 0,27675 x 0,27675
rightness (cd / m²) 300
contrast 5000 : 1
reaction time TR/TF (msec.) 25 / 25
Colors 16,7 Mio
Angle of view horizontally
vertical
R / L = 75° / 89°
O / U = 75° / 89°
Lifetime illumination
(half-life)
LED backlight / 50,000 hours
Touch (Option) Analog resistive touch
with USB interface
VGA Port FULL HD
DVI Port D I D Dual Link (24 + 1 Pin connector)
DP Port Display Port (digital image signals)
OSD - Menü Yes
supply voltage 12 DC
optional 24 DC (intern)
optional 100 - 230 AC (intern)
power consumption 30 W
operating temperatur 0 to 50 °C
storage temperature -20 to60 °C
Front Plate Front panel black powder coated, RAL 9005, with
fixing bolts
Stainless steel front plate with mounting bolts
Degree of protection front panel IP 65 (Stainless steel and standard front)
VESA connection No
weight 7,0 KG
3 - Power supply
Page 6
3.1 Monitor with 12 VDC power supply
The connector is located on the back of the monitor.
The inner pin is plus, the outer minus.
The inner plug has a diameter of 2.5 mm.
An external power supply unit with a supply voltage of 100 -
240 AC / 12 DC and 60 A output is included in this ver-
sion.
-
Attention: pay attention to polarity
3.2 Monitor with 24 VDC power supply
On the back there is a 3-pin screw terminal connection.
The supply voltage is 20 - 28 DC.
The power consumption is about 40 watts.
GND
- MINUS
+ PLUS
24 VDC
External power supply unit 230 VAC / 12 VDC
3.3 Monitor with 230 VAC power supply
On the back there is a 3-pin screw terminal connection.
The supply voltage is 100 - 230 AC
The power consumption is about 40 watts.
100 - 230 VAC
GND
L2
L1
Page 7
On the back of the monitor is the power supply connector, the GA input, the D I input, the DP
connector, the connector on the Touch if the monitor is equipped with a touch screen, and 5
buttons for adjusting the OSD menu
The keys are labeled with:
4 - Monitor Back
Button OSD menu on the ack of the monitor
POWER:
Monitor on / off.
MENU:
Enable and disable the OSD menu.
SELECT:
Confirm selection in OSD main menu or OSD submenu.
DOWN:
Selection of icons in the main and submenu as well as setting the values.
The value to be set is lowered.
UP:
Selection of icons in the main and submenu as well as setting the values.
The value to be set is increased.
5 - OSD Menü
After pressing the MENU button, the OSD menu is displayed as shown in the lower picture.
Then you can use the UP / DOWN buttons to select the various main menus. By pressing the
SELECT key, the selected main menu with the associated submenu items is selected and the
submenu items can be selected using the UP / DOWN keys. These are also acknowledged
with the SELECT key.
Then select the desired value with the UP / DOWN keys and confirm with SELECT. Exit vari-
ous menu items by pressing the MENU key.
Attention: The OSD menu can only e activated when the input signal is present!
Page 8
5.1 Picture
Backlight: Adjustment of the backlight
Brightness: Adjust the brightness
Contrast: Contrast adjustment
Sharpness: Adjust the focus
Page 9
5.2 Display
Auto Adjustment: The optimal picture setting is activated
H. Position: The horizontal position can be adjusted
. Position: The vertical position can be adjusted
Pixel Clock: The clock frequency can be adjusted
Phase: The clock rate can be adjusted
Page 10
5.3 Color
Gamma: The gamma value can be adjusted
Color Temp.: The color temperature can be adjusted
Color Effect: A color effect can be set
Color Demo: Selection for hue and saturation
Color Format: Color space selection
Hue: Adjust the color balance
Saturation: Adjust the saturation
Table des matières
Autres manuels UTICOR Moniteur
