UTAH SCIENTIFIC SC-4 Guide de configuration

SC-4 Routing and Control System

System Setup and Operations Guide

ii SC-4

SC-4 Routing and Control Customizing Guide

• Document Number: 82101-0100

• Document Version: 2.4.1

• Date: December 3, 2015

• Printed in U.S.A.

Copyrights and Trademarks

tents without the prior written consent of Utah Scientific, Inc. is strictly prohibited.

•SC-4 is a trademark of Utah Scientific, Inc.

•Windows(TM) is a registered trademark of Microsoft Corporation.

•All other product names and any registered or unregistered trademarks mentioned in this

guide are used for identification purposes only and remain the exclusive property of their

respective owners.

Notice

Information contained in this guide is subject to change without notice or obligation. While every effort

has been made to ensure that the information is accurate as of the publication date, Utah Scientific, Inc.

assumes no liability for errors or omissions. In addition, Utah Scientific, Inc. assumes no responsibility

for damages resulting from the use of this guide.

FCC Compliance (USA) and Digital Equipment Compliance (Canada)

This equipment has been tested and found to comply with the limits for a Class A, digital device,

pursuant to Part 15, Subpart B of the FCC Rules and the Canadian EMC Requirement (ICES-003).

These limits are designed to provide reasonable protection against harmful interference when the

equipment is operated in a commercial environment. This equipment generates, uses, and can radiate

radio frequency energy and, if not installed and used in accordance with the instruction manual, may

cause harmful interference to radio communications. Operation of this equipment in a residential area is

likely to cause harmful interference, in which case, the user will be required to correct the interference at

their own expense. Shielded cables must be used to ensure compliance with the FCC Class A limits.

Setup and Operations Guide

Declaration of Conformity

Utah Scientific, Inc.

4750 Wiley Post Way, Suite 150

Salt Lake City, Utah 84116-2878 U.S.A.

We declare our sole responsibility that the Utah-400 Digital Routing Switcher is in conformance with

the following standards:

Emission

•EN55022:1994+A1&A2

Immunity

•EN55024:1998

•EN61000-3-2

•EN61000-3-3

Safety

•IEC 60950-1:2001 /EN 60950-1:2001

Following the provisions of the Directive(s) of the Council of the European Union:

•EMC Directive 89/336/EED

•Low Voltage Electrical Directive 72/23/EEC

Utah Scientific, Inc. hereby declares that the product specified above conforms to the above Directive(s)

and Standard(s).

iv SC-4

Important Safeguards and Notices

This section provides important safety guidelines for the Operator and Service Personnel. Specific

warnings and cautions are found throughout the guide where they apply, but may not appear here. Please

read and follow the important safety information, specifically those instructions related to risk of fire,

electric shock, or injury to persons.

Safety Symbols

•Hazardous Voltage symbol

•Caution symbol. The product is marked with this symbol when it is necessary to

refer to the manual to prevent damage to the product.

Warnings

Please observe the following important warnings:

•Any instructions in this guide that require opening the chassis, changing a

power supply, or removing a board, should be performed by qualified personnel

only. To reduce the risk of electric shock, do not perform any service unless you

are qualified to do so.

•Heed all warnings on the unit and in the operating instructions.

•Do not use this product in or near water. Disconnect AC power before installing

any options or servicing the unit unless instructed to do so by this manual.

•This product is grounded through the power cord ground conductor. To avoid

electric shock, plug the power cord into a properly wired receptacle before con-

necting the product inputs or outputs.

•Route power cords and other cables so they won’t be damaged.

•The AC receptacle (socket) should be located near the equipment and be easily

accessible.

•Disconnect power before cleaning. Do not use any liquid or aerosol cleaner -

use only a damp cloth.

Setup and Operations Guide v

•Dangerous voltages exist at several points in this product. To avoid personal

injury, do not touch exposed conductors and components while power is on. Do

not insert anything into either of the systems two-power supply cavities with

power connected.

•Do not wear hand jewelry or watches when troubleshooting high current cir-

cuits, such as power supplies. During installation, do not use the door handles

or front panels to lift the equipment as they may open abruptly and injure you.

•To avoid fire hazard when replacing fuses, use only the specified correct type,

voltage and current rating as referenced in the appropriate parts list for this

product. Always refer fuse replacement to qualified service personnel.

•Have qualified personnel perform safety checks after any service.

Cautions

Please observe the following important cautions:

•When installing this equipment do not install power cords to building surfaces.

To prevent damage when replacing fuses, locate and correct the problem that

caused the fuse to blow, before reconnecting power.

•Use only specified replacement parts

Notices

Please observe the following important notes:

• When the adjacent symbol is indicated on the chassis, please refer to the man-

ual for additional information.

• For the HD-2020 Chassis and Master Control Panel, refer to “Connecting and

Disconnecting Power” - Chapter 2 (Hardware Installation).

vi SC-4

Company Information

Utah Scientific, Incorporated

4750 Wiley Post Way, Suite 150

Salt Lake City, Utah 84116-2878 U.S.A.

•Telephone: +1 (801) 575-8801

•FAX: +1 (801) 537-3098

•Technical Services (voice): +1 (800) 447-7204

•Technical Services (FAX): +1 (801) 537-3069

•E-Mail -General Information: [email protected]

•E-Mail -Technical Services: [email protected]

•World Wide Web: http://www.utahscientific.com

•After Hours Emergency: +1 (800) 447-7204. Follow the menu instructions for Emergency Service.

Setup and Operations Guide

Warranty Policies

Hardware Warranty

Utah Scientific, Inc. warrants to the original purchaser that the Utah Scientific hardware is free

from defects in materials and workmanship and will perform substantially in accordance with

the accompanying written materials under normal use and service for a period of ten (10) years

from the date of shipment. Any implied warranties on hardware are limited to ten (10) years.

Some states/jurisdictions do not allow limitations on duration of an implied warranty, so the

above limitation may not apply to certain specific purchasers.

Software Warranty

Utah Scientific warrants that the software will perform substantially in accordance with the

accompanying written materials for a period of one (1) year from the date of shipment.

Customer Remedies

For the first one (1) year after purchase of the software and the first ten (10) years after the date

of purchase of the hardware, Utah Scientific’s and its suppliers’ entire liability and purchaser’s

exclusive remedy shall be, at Utah Scientific’s option, either:

• Return of the price paid, or

• Repair or replacement of the software or hardware that does not meet the above warranties

and is returned to Utah Scientific under the returned materials authorization (RMA)

process with freight and forwarding charges paid.

After the initial warranty periods, purchaser’s exclusive remedy is the repair or replacement of

the hardware upon payment of a fixed fee to cover handling and service costs based on Utah

Scientific’s then-current price schedule. The above warranties are void if failure of the

software or hardware has resulted from an accident, abuse, or misapplication. Any replacement

software or hardware will be warranted for the remainder of the original warranty period or

thirty (30) days, whichever is longer.

viii SC-4

No other warranties. To the maximum extent permitted by applicable law, Utah Scientific and

its suppliers disclaim all other warranties, either express or implied, including, but not limited

to implied warranties of merchantability and fitness for a particular purpose, with regard to the

software, the accompanying written materials, and any accompanying hardware. This limited

warranty gives the purchaser specific legal rights. These rights may vary in certain states/

jurisdictions.

No liability for consequential damages. To the maximum extent permitted by applicable law,

in no event shall Utah Scientific or its suppliers be liable for any damages whatsoever

(including without limitation, damages for loss of business profits, business interruption, loss

of business information, or any other pecuniary loss) arising out of the use of or inability to use

Utah Scientific products, even if Utah Scientific has been advised of the possibility of such

damages. Because some states/jurisdictions do not allow the exclusion or limitation of liability

for consequential or incidental damages, the above limitation may not apply in those

circumstances.

SC-4 Setup and Operations Guide i

SC-4 Routing and Control Customizing Guide

Table of Contents

SC-4 Routing and Control Customizing Guide

Copyrights and Trademarks .......................................ii

Notice ......................................................................... ii

FCC Compliance ........................................................... ii

Declaration of Conformity .......................................... iii

Important Safeguards and Notices ............................ iv

Company Information ................................................. vi

Warranty Policies ....................................................... vii

CHAPTER 1 Introduction

In this Guide ............................................................... 1-1

Chapter Contents ....................................................... 1-2

How to use this Guide ................................................ 1-3

System Hardware Requirements ............................... 1-4

Hardware Features .................................................... 1-5

Front Cover Features ..................................................... 1-5

SC-4 Chassis Front View with Front Cover Removed .... 1-6

SC- 4 Control System Backplane ................................... 1-7

CHAPTER 2 Hardware Installation

In this Chapter ................................................................ 2-1

Unpacking and Inspection .......................................... 2-2

Warnings and Cautions .............................................. 2-4

Claims Against the Carrier ............................................. 2-5

Installing Hardware .................................................... 2-6

Installing Physical Equipment ......................................... 2-6

Connecting Control Cables ............................................ 2-6

Connecting the Serial Port ............................................. 2-7

ii Table of Contents

Connecting the Sync Ports ..............................................2-7

Connecting Power - AC Systems ....................................2-8

DC Power Connectivity ...................................................2-10

Cable Considerations ......................................................2-11

SC-4 Setup and Operations .......................................2-12

Overview .........................................................................2-12

Unpacking and Installation Instructions ...........................2-12

Connecting All Pieces to SC4 Chassis ...........................2-13

Applying Power to SC4 Chassis .....................................2-18

Changing IP address for SC4 chassis ............................2-18

Changing the Chassis ID ................................................2-19

Setting the Correct Time and Date ..................................2-20

Proper Hot Swappable Removal of SC4 Cards ..............2-21

Changing Serial Port Settings .........................................2-22

Ethernet LEDs .................................................................2-25

System LEDs ..................................................................2-25

Sync LEDs ......................................................................2-25

Power Supply LEDs ........................................................2-25

CHAPTER 3 System Configuration

In this Chapter .................................................................3-1

SC-4 Control Board System Operation ...................... 3-2

Redundant Operation ......................................................3-2

The Debug Port ...............................................................3-2

The SC-4 Control Board ............................................ 3-3

SC-4 Front View Components and Functions .................3-3

The SC-4 Control Board Hardware Settings ...................3-4

Hardware Changes on the SC-4 Control Board ..............3-5

SC-4 Control Board Error and Status LED’s .............. 3-7

Power Supply LED’s .......................................................3-7

System LED’s ............................................................ 3-9

The SC-4 Monitor Display Operation ......................... 3-11

Features and Functions of the SC-4 Monitor Display .....3-11

Monitor Display Formats .................................................3-12

The SC-4 Power - Supply and Connections .............. 3-18

Voltage Alarms ................................................................3-19

SC – 4 Power Supply – Top View ...................................3-20

Table des matières

Autres manuels UTAH SCIENTIFIC Système de contrôle

UTAH SCIENTIFIC

UTAH SCIENTIFIC SC-40 Guide de configuration

Manuels Système de contrôle populaires d'autres marques

Pentair Pool Products

Pentair Pool Products Compool Manuel utilisateur

ComfortNET

ComfortNET CTK04 Manuel utilisateur

Fireye

Fireye InSight II 95DSS3 Manuel utilisateur

CAME

CAME G3000 Manuel utilisateur

Idemia

Idemia MorphoAccess VP MD Manuel utilisateur

Axis

Axis P1445-LE-3 Manuel utilisateur

HEIDENHAIN

HEIDENHAIN TNC 150 B Manuel utilisateur

CNC-Step

CNC-Step High-Z T-Series Manuel utilisateur

Doosan

Doosan DVF Series Manuel utilisateur

Honeywell

Honeywell KAP 140 Manuel utilisateur

Honeywell

Honeywell vk41 series Manuel utilisateur

AirBench

AirBench FPW Guide d'installation

Cypress

Cypress HHR-3160 Manuel utilisateur

CAME

CAME GLT40AOS Manuel utilisateur

Zonex

Zonex GEN II -VVT Guide de l'utilisateur

Altronics

Altronics K 9650 Manuel utilisateur

micro-trak

micro-trak RoadMaster Manuel utilisateur

micro-trak

micro-trak Calc-An-Acre II Manuel utilisateur