Universal Remote Control URC-SR3 Manuel utilisateur

URC-SR3

Remote Control

Owner’s Manual

Congratulations!

With your new URC-SR3 Remote Control,

you now have the power to control your

home entertainment system with just one

easy-to-use control. Thousands of audio and

video component codes have already been

programmed into the remote for you, making

it a breeze to set up. Be sure to install the

included batteries first. See page 6 for

instructions.

Quick Set-up

Set-up one component at a time, and

you’ll move quickly through your system.

STEP 1: Turn on the component you want to

activate. (Other components can be on or

off, it doesn’t matter.)

STEP 2: Point your new URC-SR3 Remote

Control toward the component and press the

appropriately labeled Component button (TV

for TV, DVD for DVD, etc.) While holding this

button down, press the numeric assigned to

your brand in the Quick Set-up Code Table

(See Page 2) and release both Component

button and the number key to save the code.

The component light will blink two times to

confirm that the code has been stored.

STEP 3: Point the remote control at the

component.

STEP 4: Press the power button. If it turns

off, it is programmed for your component. If

it does not turn off, use the Pre-Programmed

3-Digit code Method or Scanning Method.

Check your work before you move to

the next component. Press the POWER

[ON] button to turn the component back on.

Next, test the VOLUME and CHANNEL

buttons (or PLAY and STOP buttons for DVD).

Repeat Steps 1-3 to activate up to three

components.

Didn’t work for one of your components?

See other set-up options on page 8.

Page | 1

Quick Number Manufacturer/Brand

0LG

1 SCIENTIFIC ATLANTA

2 MOTOROLA

3 DIRECTV

4 ECHOSTAR

5MOXI

6 CABLEVISION

7 SAMSUNG

8GE

9 JERROLD

Quick Number Manufacturer/Brand

0 SANYO

1 SONY

2 SAMSUNG

3LG

4 TOSHIBA

5 PANASONIC

6 PHILIPS

7 HITACHI

8 SHARP

9 VIZIO

Quick Number Manufacturer/Brand

0 HITACHI

1 SONY

2 PHILIPS

3 SAMSUNG

4 PHILIPS MAGNAVOX

5 PANASONIC

6LG

7 JVC

8 DENON

9 PIONEER

CBL/SAT

DVD

Quick Set-up Code Tables

Page | 2

Page | 3

Keypad Layout and

Button Functions

Allows you to turn the

selected component on

and off.

POWER

Designed to send Power

On/Off commands for up to

three components with one

button press.

ALL OFF

Used to select the

component you want

to operate and signals

remote control activity.

Displays the

Applications Menu

through the Cable

Set Top Box.

COMPONENTS

Exits from current

screen through the

Cable Set Top Box.

Use to enter code

numbers for

programming

components and to

enter channel

numbers to tune in

channels. Also used to

make numeric entries

on on-screen menus.

Perform standard

DVD and DVR

functions when in

DVD and DVR mode,

or VOD (Video-On-

Demand) and DVR

(Digital Video

Recorder) functions

when in Cable mode.

Custom-

programmable

Button

Displays the

Program Guide

listings through

the Cable Set

Top Box.

Displays

information about

the program

currently playing

or highlighted in

the Program

Guide through the

Cable Set Top Box.

INFO

GUIDE

Used for

programming

steps and on-

screen navigation

and highlighting.

CURSOR

NAVIGATION

PAD

EXIT

Selects highlighted

screen options.

SELECT

Selects the video

source from

available

components.

INPUT

Returns to the

previously tuned

channel through

the Cable Set

Top Box.

LAST

Silences the Sound.

Press to activate.

Press again to

restore sound to

the previous level.

MUTE

NUMBER PAD

TRANSPORT

CONTROLS

MY BUTTON

VOLUME

Raises or lowers

the sound volume.

Custom-

programmable

Favorite Channel

Buttons

MY FAVORITES

Table of Contents

Quick Set-up .............................1

Keypad Layout & Button

Functions ...................................3

Getting Started – Overview

• Battery Installation ........................6

• Activation Overview......................6

• Using Component Buttons ..............7

• Learning Capability.......................7

• Low Battery Warning ....................7

• Couch Mode ................................7

Get Started with the basics ...........8

• Quick Set-Up................................9

• Three-Digit Set-up..................10-11

• Auto-Search Set-up................12-13

• Set-up Using the

Learning Method ...................14-16

Activating Optional Advanced

Features.............................18-19

• MacroPower™ Total System

On/Off......................................20

• “My BUTTON”............................21

• “My favorites” buttons.................22

Activating Punch Throughs

.........

• SimpleSound™ Total System

Volume Control...........................24

• Channel Control

Punch Through ...........................25

• Transport Control

Punch Through ...........................26

• OSD (On-Screen Display)

Control Punch Through ..............27

Page | 4

Page | 5

Erasing Commands - Overview....28

• Erasing a Single Learned

Command ..................................28

• Erasing All Learned Commands

from One Component .................29

• Erasing MacroPower & Other

Macro Commands......................30

• Erasing SimpleSound & Other

“Punch Through” Commands.......31

• Factory Reset..............................32

Finding a Component’s Set-Up

Code Number...........................33

Pre-Programmed Code Tables ..34

• CABLE/SAT...............................35

• TV .......................................36-37

• DVD/DVR.................................38

FAQs........................................39

Warranty .................................40

Specifications ..........................42

Information to the user ..........43

COMPONENT

BUTTONS

NUMBER

PAD

Getting Started - Overview

Battery Installation

Press the tab and remove the cover of the battery

compartment located in the back of your remote.

Insert the two AAA batteries (included in the package)

making sure to match the positive (+) and negative (-)

symbols as shown in the diagram. Place the cover

back over the battery compartment.

Activation overview control up

to three components

The URC-SR3 remote control is designed to

control up to three different TV/DVD

components and operate virtually all brands

of TV, DVD/DVR, and CABLE/SAT components.

Component Buttons

Be sure to match your component to the

proper Component button on the top of the

remote.

INSERT BATTERIES

CORRECTLY

Page | 6

Page | 7

Using Component Buttons

Once you have activated the remote for all

three of your components, you can simply

press a Component button at the top of the

remote, and the buttons on the remote will

work with that component.

Each time you press a button on the remote,

the Component button light will turn on,

indicating which component you are

controlling.

Learning Capability

The URC-SR3 has the ability to learn

functions from the original remote controls

of other manufacturers, even if they are not

in our pre-programmed database. See

page 14 for instructions.

Low Battery Warning

When the batteries are low and need to be

replaced, the component light will quickly

blink two times when you press the POWER

[ON] button.

Couch Mode

We’re watching out for your batteries. Your

URC-SR3 remote is designed to automatically

turn itself off if a button is pressed for more

than 30 seconds. This prevents battery power

from being depleted if the remote accidentally

slips between the couch cushions.

We love to help!

PLEASE CONTACT OUR TECHNICAL

SUPPORT CENTER.

E-MAIL: [email protected]

Phone: 1-800-901-0800 (9:00AM - 6:00PM

EST Monday - Friday)

PLEASE DO NOT RETURN

THIS PRODUCT TO THE STORE

Three ways to get started

There are three ways you can activate your

new URC-SR3 universal remote control using

its pre-programmed codes.

1. Quick Set-Up (page 9)

2. Three-Digit Code Set-up (page 10)

3. Auto—Search Set-up (page 12)

Page | 8

Page | 9

1. Quick Set-up

Set-up one component at a time, and you’ll

move quickly through your system.

Step 1:

Turn on the component you want to

activate. (Other components can be on or

off, it doesn’t matter.)

Step 2:

Point your new URC-SR3 Remote

Control toward the component and press the

appropriately labeled Component button (TV

for TV, DVD for DVD, etc.) While holding this

button down, press the numeric assigned to

your brand in the Quick Set-up Code Table

(See Page 2) and release both Component

button and the number key to save the code.

The component light will blink two times to

confirm that the code has been stored.

Step 3:

Point the remote control at the

component.

Step 4:

Press the power button. If it turns

off, it is programmed for your component. If

it does not turn off, use the Pre-Programmed

3-Digit code Method or Scanning Method.

Check your work. Press the POWER [ON]

button to turn the component back on.

Next, test the VOLUME and CHANNEL buttons

(or PLAY and STOP buttons for DVD) to make

sure they all work. Repeat steps one through

three until all your components are set up prop-

erly.

COMPONENT

BUTTONS

NUMBER

PAD

Autres manuels pour URC-SR3

Table des matières

Autres manuels Universal Remote Control Télécommande

Universal Remote Control

Universal Remote Control UR-J550TVE Manuel utilisateur

Universal Remote Control

Universal Remote Control Easy Clicker UR2-211 Manuel utilisateur

Universal Remote Control

Universal Remote Control INSIGHT M1057 Manuel utilisateur

Universal Remote Control

Universal Remote Control Easy Clicker UR2-211 Manuel utilisateur

Universal Remote Control

Universal Remote Control UR4-DCT Manuel utilisateur

Universal Remote Control

Universal Remote Control UR2-DTA Manuel utilisateur

Universal Remote Control

Universal Remote Control MX-6000 - Manuel utilisateur

Universal Remote Control

Universal Remote Control UR3-EXP Manuel utilisateur

Universal Remote Control

Universal Remote Control UR3-EXP Manuel utilisateur

Universal Remote Control

Universal Remote Control UR4-DCT Manuel utilisateur

Universal Remote Control

Universal Remote Control CLIKR-5 UR5U-8500 Manuel utilisateur

Universal Remote Control

Universal Remote Control CLIKR-5 UR5U-8500 Manuel utilisateur

Universal Remote Control

Universal Remote Control CLIKR-5 UR5U-8500 Manuel utilisateur

Universal Remote Control

Universal Remote Control ONE FOR ALL 8800CMN Manuel utilisateur

Universal Remote Control

Universal Remote Control Complete Control MX-880 Manuel utilisateur

Universal Remote Control

Universal Remote Control UR5-8400 Manuel utilisateur

Universal Remote Control

Universal Remote Control LIGHTING Manuel utilisateur

Universal Remote Control

Universal Remote Control osiris Manuel utilisateur

Universal Remote Control

Universal Remote Control Easy Clicker UR3-SR2 Manuel utilisateur

Universal Remote Control

Universal Remote Control Easy Clicker UR2-211 Manuel utilisateur

Universal Remote Control

Universal Remote Control CLIKR-5 UR5L-8720L Manuel utilisateur

Universal Remote Control

Universal Remote Control URC-SR3 Manuel utilisateur

Universal Remote Control

Universal Remote Control Clikr-5 UR5U-8820L Manuel utilisateur

Universal Remote Control

Universal Remote Control URC 22?-7 Manuel utilisateur

Manuels Télécommande populaires d'autres marques

Panasonic

Panasonic EUR7622KB0 Manuel utilisateur

Bang & Olufsen

Bang & Olufsen Beo4 Manuel utilisateur

Sunwave Tech.

Sunwave Tech. RemoteComm SRC-7000 Manuel utilisateur

Multiplex

Multiplex PROFI TX 9 Manuel utilisateur

One Remote

One Remote RMB4 Manuel utilisateur

FUTABA

FUTABA 9ZAP - PART2 Manuel utilisateur

HR Matic

HR Matic HR MULTI 3 Manuel utilisateur

Yamaha

Yamaha ACC-GNRST-30-20 Manuel utilisateur

EisSound

EisSound KBSOUND Manuel utilisateur

Marantz

Marantz RC101 Manuel utilisateur

Conrad

Conrad FS20 TC6 Manuel utilisateur

Anritsu

Anritsu MP1777A Manuel utilisateur

Niles

Niles WVC100 Guide de dépannage

RCA

RCA RCU1300 Manuel utilisateur

Bang & Olufsen

Bang & Olufsen BEO6 Manuel utilisateur

GE 94901 Manuel utilisateur

Onbon

Onbon YQ1-75 Manuel utilisateur

FUTABA

FUTABA R7108SB Instructions d'installation